710703 - Heating CaterChef - Free user manual and instructions

Product Type	Overhead Warmer
Model	710703
Brand	CaterChef
Voltage	230V
Frequency	50 Hz
Power Consumption	750 W
Power Control	Rotary dial with thermostat (on/off and power regulation)
Indicator Light	Lights up when heating, turns off when temperature reached
Minimum Top Clearance	76 mm
Minimum Bottom Clearance	270 mm
Mounting Options	Wall-mounted or optional T-leg stand (not included)
Plug Type	Grounded plug
Material	Metal housing, heating elements
Cleaning	Wipe with damp cloth; do not immerse in water or use abrasive cleaners
Safety Features	Automatic temperature regulation; requires grounded socket; minimum clearance to combustibles
Spare Parts	T-leg stand, chains (optional); use only CaterChef parts
Repair	Must be performed by a professional electrician
Disposal	Waste Electrical and Electronic Equipment (WEEE) – do not dispose with household waste
Warranty	Invalidated if damage caused by not following instructions

Frequently Asked Questions - 710703 CaterChef

How do I turn on the overhead warmer?

Turn the power regulator knob to the desired power setting. The indicator light will turn on and off once the set temperature is reached.

What are the required clearances for installation?

Allow at least 76 mm of free space above and 270 mm below the appliance. No minimum rear clearance is required.

Can I clean the warmer with water?

No. Do not rinse or immerse the unit in water. Use a damp cloth on the housing only and dry it immediately. Avoid cleaning the fragile heating elements.

Does the warmer come with a stand?

No, the T-leg stand is optional and sold separately. You can mount the warmer on a wall or use the optional stand.

What should I do if the warmer doesn't heat?

Check that the plug is firmly inserted and the cord is not damaged. If the issue persists, contact a qualified service technician.

Can I use an extension cord?

No. Never plug the warmer into an extension cord or a multi-outlet adapter. Plug directly into a grounded wall outlet.

How do I mount the optional T-leg stand?

Remove the M4 screws from the side panels (2 on each side), attach the stands, and reinsert the screws. Tighten securely.

Why does the indicator light turn off during operation?

The indicator light turns off when the set temperature is reached. It will cycle on and off as the thermostat maintains the desired heat.

Is it safe to leave the warmer unattended?

The warmer is designed for continuous use, but always ensure nothing is placed on top and keep flammable materials away. Unplug when not in use.

Can I replace the power cord myself?

No. Cord replacement must be done by a professional electrician using an identical model cable. Do not attempt to repair the appliance yourself.

USER MANUAL 710703 CaterChef

WARMHOUDBRUG

OVERHEAD WARMERS

Modelnr.: *710.701 - *710.703 - *710.705

*710.707 - *710.709

Technical line drawing of a mechanical device with no visible text or symbols

GEBRUIKSAANWIJZING

USER'S MANUAL

Technical line drawing of a mechanical bracket with mounting feet and structural supports (no text or symbols)

SCHOONMAKEN EN ONDERHOUD:

Before starting up, please read this manual carefully in order to ensure the correct and safe installation and usage. Damage caused by not following the instructions of this manual will always invalidates the warranty.

CaterChef would like to emphasize that this instruction manual needs to be readed carefully before usage and should be stored for later use.

TECNICAL SPECIFICATIONS:

MODEL VOLTAGE	HZ POWER (W)
710.701230 V 50 Hz	500 W
710.703230 V 50 Hz	750 W
710.705230 V 50 Hz	1000 W
710.707230 V 50 Hz	1400 W
710.709230 V 50 Hz	1750 W

For more information we would like to ask you to go to our website www.emga.com.

You could for example search on item nr. and go to downloads.

Here, you will be able to find more information like the exploded views and the spare part lists.

TYPE PLATE

MODEL: 688018	POWER: 3500W 15A,IPX4
DATE: 2019.04	HERTZ: 50Hz
VOLTS: 220-240V~	PHASE: 1PH
SN: C451904062	PO: KA19085-01(#413962)

The type plate (the picture is an example) is located on the device.

You are requested not to remove it. The type plate can for example be used to determine, when the item was purchased and from which production line it originates. This information may be essential with regard to warranty. It also contains important information such as the voltage and power supply which determines the ability to connect the device safe.

TRANSPORT AND STORAGE:

As long as the products are packed, please make sure you never place them upside down. This could damage the appliance. During transport, the product should be placed carefully. Make sure you prevent any drastic vibration during transport. You should never place or store this product outside or in open air for a longer period of time than a few hours (not even packed). It should be stored in a well-ventilated warehouse without corrosive gasses. When, in case of an emergency, you need to store

them temporarily outside, you should take measures to protect them from rain or moisture.

SAFETY PRECAUTIONS AND USAGE ENVIRONMENT:

1. Remove all packaging material and any protective film from the device.
2. The appliance must have at least 76 mm of free space at the top and at least 270 mm of free space at the bottom. No minimum clearance is required at the rear.
3. Do not place the appliance on a carpet, a tea towel, tablecloth (vinyl) or another surface that cannot withstand high temperatures. This could cause fire hazard.

4. During operation, do not place any stuff in front of the appliance to make sure it could be operated at any time needed.

5. Never plug the power cord into an extension cord or wall outlet to which multiple devices are connected.

6. Never put the plug in the socket with wet hands.

7. The power pressure of this equipment should conform to the supply voltage of this product.

8. The user should install the suitable power switch, fuse and leakage-protector near to the equipment.

9. Before usage, this equipment must be connected (safe) to a grounded socket.

10. Ensure whether all the connections of all the electric elements of the product are firm or not, and whether the safety grounding is reliable or not.

11. When disconnecting the device from the power, never pull from the cord, only the plug.

12. When you change the power cable, you should select the same model cable and: it is only allowed to let a professional electrician do this.

13. If you need to (re)connect, repair or maintain the appliance, do not do this by yourself.

This is forbidden. This must always be done by a professional electrician.

1. If there are any abnormal phenomenons during usage, you must stop the appliance directly.

After checking you can continue to use it as long as it is safe. Do not repair the appliance by yourself. This should always been done by a technical professional.

1. Never use other parts than the ones which are from CaterChef.

CaterChef is not taking any responsibility for damage caused by the use of other (non-related) parts.

INSTALLATION:

1. Minimum distances for heat-sensitive or combustible installation surfaces.
2. It is recommended to buy our chains or T-legs (see T-legs) to keep this distance and install the lamp. (not included)

PRECAUTIONS FOR USE

1. Check whether the mains supply is suitable for the device (see the type plate).
2. Make sure that the mains supply is earthed in accordance with the applicable standards and guidelines.

REGULAR USE

1. To turn on the device, turn the power regulator to the desired power, the light will come on and when the desired temperature is reached, it will turn off; the selected power is maintained via the controller.
2. Turn the knob to the "0" (OFF) position to turn the unit off.
3. The indicator light comes on when the switch is turned and goes off when the set temperature is reached.
4. After switching on, the device reaches the desired temperature very quickly.
5. You can therefore switch the device on shortly before use and switch it off again shortly after use..

INSTRUCTIONS FOR USE

1. The outside of the appliance gets hot. Be careful when touching the device.

INSTALLATION OF T-LEGS STANDARD (OPTIONAL)

The overhead warmers can be mounted on a stand (available as an option).

1. Remove the M4 screws from the side panels of the device (2x on each side).
2. Put the stands on.
3. Replace the screws in the correct position and then tighten them.

SAFETY PRECAUTIONS REGARDING MAINTENANCE

1. Remove the plug from the socket when you are not using the appliance.
2. Before cleaning, first remove the plug from the socket.
3. Do not immerse the appliance in water and do not put it in the dishwasher.

Technical line drawing of a mechanical bracket and support structure (no text or symbols)

CLEANING AND MAINTENANCE:

Step 1: After usage, the device must first be switched OFF, after which you must remove the plug from the socket. Always do this in the order described to prevent short circuit or other possible dangers.
Step 2: Do not use aggressive cleaning agents when cleaning. The appliance must not be cleaned with a high-pressure cleaner or with a water hose. Use a damp cloth and then dry it. This only applies to the housing. BEWARE of the elements, they are fragile.

- Pay attention! Do not rinse the device with water (don't wash it by using the tap).

This could cause damage to the device and could therefore lead to dangerous situations;

• Never clean the device with a stainless steel brush. This causes scratches and damages to the device;
  • Always store the appliance inside and keep it dry.

If the appliance does not work or is damaged, check the following:

1. Whether the plug is in the socket;
2. Whether the plug and/or the cord is damaged.

If it is nr. 2 or if another problem occurs, contact your local dealer or authorized service technician.

According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any time in future you need to dispose of this product please do NOT dispose of this product with household waste. Please send this product to WEEE collecting points where available.