SVCA2000MIN - Heating SVAN - Free user manual and instructions

Product Type	Electric Convection Heater
Model	SVCA2000MIN
Brand	SVAN
Power Consumption	2000 W
Heating Type	Convection
Suitable Room Size	Up to 25 m²
Dimensions (W x H x D)	200 x 150 x 100 mm
Weight	1.2 kg
Voltage	220-240 V ~ 50 Hz
Temperature Control	Adjustable Thermostat
Safety Features	Overheat Protection, Tip-over Switch
Material	Metal & Plastic
Color	White
Cord Length	1.5 m
Noise Level	<45 dB
Energy Efficiency Class	A

Frequently Asked Questions - SVCA2000MIN SVAN

How do I clean the SVCA2000MIN heater?

Unplug the heater and let it cool completely. Use a soft dry cloth to wipe the exterior. Do not use water or abrasive cleaners. Vacuum the air inlet and outlet grilles gently to remove dust.

Can the heater be used in a bathroom?

No, this heater is not designed for humid environments. It should only be used in dry indoor areas. Avoid contact with water.

What does the red indicator light mean?

The red indicator light shows that the heater is powered on and heating. When the thermostat reaches the set temperature, the heating element may cycle off but the light remains on.

Is it safe to leave the heater unattended?

While the heater has safety features like overheat protection and tip-over switch, it is recommended not to leave it unattended for long periods. Always turn it off when leaving the room.

How do I adjust the thermostat?

Turn the thermostat knob clockwise to increase the desired temperature and counterclockwise to decrease. Wait a few minutes for the heater to respond.

Does the heater have a timer?

No, the SVCA2000MIN does not include a built-in timer. It must be turned on and off manually.

What is the warranty period for this heater?

SVAN typically offers a 2-year warranty. Check your purchase receipt or contact SVAN support for specific terms.

Where can I find the model number?

The model number is printed on a rating label located on the back or bottom of the heater. It reads 'SVCA2000MIN'.

Why does my heater turn off suddenly?

This may be due to the overheat protection activating. Ensure air intake and outlet are not blocked. If the tip-over switch is triggered, place the heater on a flat, stable surface.

Can I use an extension cord with this heater?

It is not recommended. Plug the heater directly into a wall outlet. If necessary, use a heavy-duty extension cord rated for at least 2000W with a 13A fuse.

USER MANUAL SVCA2000MIN SVAN

Exterior view of a modern electric solar heating unit with control knobs and wheels (no visible text or symbols)

Modelos: SVCA2000MIR & SVCA2000MIN

Diagram of a track with two car seats and a ramp, showing motion direction (no text or symbols)

Utilización:

Exterior view of a modern electric solar heating unit with control panel and wheels (no text or symbols visible)

Model: SVCA2000MIR & SVCA2000MIN

General Safety Warning:

1. Read all instructions carefully before using.
2. Make sure the voltage is the same as that indicated on the rating plate of the appliance.
3. Do not operate this appliance if the cable or plug becomes damaged.
4. Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
5. If the cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
6. Ensure the appliance is switched off before connecting to the mains power supply.
7. Switch off the power supply and disconnect from mains supply when not in use, before cleaning or other maintenance.
8. Turn off the light Switch, disconnect the power supply.
9. The heater must not be located immediately below a socket-outlet.
10. Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
11. Indoor use only.
12. In order to avoid overheating, do not cover the heater.
13. To prevent a possible fire, do not block air intakes or exhaust in any manner.
14. Do not touch the hot surfaces.
15. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
16. Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and socket-outlet.
17. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
18. Children should be supervised to ensure that they do not play with the appliance.
19. Do not leave this appliance unattended when it is in use.
20. The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by disconnect the appliance and vacuum cleaning air vents and grilles.
21. Do not place the heater on carpet, do not place the cable under carpets. Arrange cord away from traffic areas so that it will not be tripped over.

22. Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool.

23. Do not store away until the heater cools down, store the heater in cool dry location when not in use.

24. When in use, keep the distance between window(wall) at least 50cm

Technical Specifications:

Model	SVCA2000MIR	SVCA2000MIN
Rated Voltage	220 V -240V~	220 V -240V~
Rated Frequency	50/60 Hz	50/60 Hz
Rated Power	20000W	20000W

Assembly

1. Insert the wheels into the bottom part of the supporting feet, and to be sure it is tight enough.
2. Put the appliance with upside down, fix the to the appliance with screw.

Diagram of a track with two circular objects above a ramp, showing motion or assembly (no text or symbols)

Utilization:

• Connect the appliance to safety socket.
  ● Turn on switch to the heating position (I or II or III).
  ● The heating functions (III).

Heat setting I	1000W
Heat setting II	2000W

• Turn the thermostat knob in the direction of clockwise until reaching the maximum temperature.
• Once the room temperature is reached, slowly turn the thermostat knob in the direction of anticlockwise until you get your required temperature.
• Turn the switch to "0" position to switch off the heater. Unplug the appliance then after.

Overheat safety device

• Your heater is fitted with a safety device to switches off the heater in the event of overheating. If the safety device operated, please turn the heater off, unplug the appliance and let it completely cool, inspect for blockage of air inlet or outlet, attempting to restart the heater then after.
• If the heater fails to operate or the safety device switches the heater off again, return heater to your nearest service center for examination or repair.

Maintenance:

1. Always disconnect the appliance and let it completely cool before any maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never immerse the unit in water, nor let water drip into the unit.

Storing:

1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction manual to the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage the appliance.

Recycling (Disposal of the product at the end of its life)

Waste Electrical Products Should Not Be Disposed Of With Household Waste. Please Recycle Where Facilities Exist. Check With Your Local Authority For Recycling Advice.