NVR-VS40-M - Household Fan NEVIR - Free user manual and instructions

Product type	High-velocity floor fan
Brand	Nevir
Model	NVR-VS40-M
Power supply	220-240V~50Hz
Speed settings	3 speeds (Slow, Medium, Fast)
Motor	Energy-saving, high-velocity motor with thermal protection
Blade diameter	40 cm
Blade material	Metal (precision fan blades)
Stand material	Chrome-plated metal
Tilt adjustment	Yes, vertical tilting
Safety features	Thermal protection, overheat protection
Guard	Front and rear guards included
Power cord	Replaceable only by qualified person if damaged
Cleaning	Disconnect from mains, remove guard and blades, clean with mild soap and dry cloth
Usage location	Indoor, on flat stable surface, away from windows and damp areas
Compliance	EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC

Frequently Asked Questions - NVR-VS40-M NEVIR

How do I adjust the fan speed?

Turn the speed control knob on the tube to the desired position: 0 (off), 1 (Slow), 2 (Middle), or 3 (Fast).

Can I tilt the fan head?

Yes, you can adjust the air flow direction vertically by tilting the fan head.

How do I clean the fan?

Disconnect the fan from the mains. Remove the front guard and blades carefully. Clean with a soft cloth and mild soap to remove oil stains, then wipe dry with a dry cloth. Never use polish or corrosive liquids. Replace blades and lock guard before use.

What should I do if the power cord is damaged?

The supply cord must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazard. Do not attempt to repair it yourself.

Can children use this fan?

This appliance can be used by children aged 8 years and above if they have been given supervision and instruction on safe use. Children should be supervised to ensure they do not play with the appliance. Cleaning and maintenance should not be done by children without supervision.

Is the fan suitable for outdoor use?

No, the fan is designed for indoor use only. Do not place it in damp areas or near windows to prevent fire or electric shock.

What does the thermal protection do?

The thermal protection feature prevents the motor from overheating by automatically shutting off the fan if it gets too hot. This enhances safety and prolongs motor life.

Can I use the fan in a bathroom?

No, the fan should not be placed in a damp place or where humidity is high, such as a bathroom, to avoid electric shock.

How do I dispose of this appliance?

Follow the WEEE directive: do not dispose of it in unsorted municipal waste. Separate collection is required for recovery and recycling. Remove any batteries before disposal and use designated collection channels.

What are the speed numbers?

Speed 1 is Slow, 2 is Middle, and 3 is Fast. Ensure the voltage matches the rating (220-240V~50Hz) before use.

USER MANUAL NVR-VS40-M NEVIR

Front view of a metal multi-panel air fan with visible blades and mesh grille (no text or symbols)

220-240V-50Hz

Front view of a metal multi-panel air fan with visible blades and mesh grille (no text or symbols)

230V-50Hz

REMARKS: ELECTRICAL CONNECTIONS SHALL BE IN ACCORDANCE WITH NATIONAL OR LOCAL CODES.

READ AND SAVE THIS INSTRUCTION MANUAL

Sleek & modern high-velocity fan provides more powerful wind than ordinary plastic fans. Draws air off the floor and circulate through the entire room keeping room cool and breezy. Put near the windows and it helps exhaust hot indoor stuffy air and pulls in fresh outdoor air.

● Energy-saving, high velocity motor for maximum air circulaon
- Tilt-adjustment for exible use
- Triple speed selecon
- Precision fan blades for powerful wind but low-noise

- Chrome-stand, solid construcon with thermal-protecon to prevent motor overheat.

INSTRUCTION FOR INSTALLING

WARNING: IF THE SUPPLY CORD IS DAMAGED, MUST BE REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR SIMILAR QUALIFIED PERSON IN ORDER TO AVOID THE HAZARD.

BE SURE TO SHUT OFF ELECTRIC SUPPLY AT MAIN SWITCH OR CIRCUIT BREAKER BEFORE INSTALLATION.

THE IMPORTANT SAFEGUARDS AND INSTRUCTION APPEARING IN THIS MANUAL ARE NOT MEANT TO COVER ALL POSSIBLE CONDITIONS AND SITUATION THAT MAY OCCUR.IT MUST BE UNDERSTOOD THAT COMMON SENSE, CAUTION AND CARE ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PROCDUCT.THESE FACTORS MUST BE SUPPLIED BY THE PERSON(S) CARING FOR AND OPERATING THE UNIT.

NO RESPONSIBILITY WILL BE ACCEPTED FOR ANY DAMAGE WHICH MAY OCCUR DURING TRANSPORT OR BY IMPROPER INSTALLATION OR VOLTAGE FLUCTUATION OR IF ANY PORTION OF THE PRODCT HAS BEEN ALTERED OR MODIFIED.

Safety Instrucons:

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instrucon concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Improper installaon may result in the risk of re, electric shock, or injury to persons.
5. To present risk of re and electric shock, do not use the unit near windows.
6. The fan should be placed on a at and stable surface when operang to avoid overturning.
7. The fan should not be placed in a damp place or where humidity is high (such as in a bathroom).
8. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instrucon concerning use of

the appliance in a safe way and understand the hazards involved.

1. Cleaning and user maintenance shall not be made by children without supervision.

2. Ensure that the fan is switched o from the supply mains before removing the guard.

Explode view

1. Front Guard
2. Blade
3. Screw
4. Motor
5. Nut
6. Plasc washer
7. Bolt
8. Rear Guard
9. Nut
10. Stand
11. Screw
12. Power supply cord
13. Switch box
14. Nut
15. Screw

Operang Instrucons:

a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control on the tube to selected speeds: 0(o) and speeds1, 2, 3 is Slow, Middle, Fast.
c) The direcon of the air ow is vercally adjusted by lng the fan head.
d) Never touch the blades with hand or any object!
e) Do not pull the cord too hard. If damaged aer pro-long use, get it repaired by any electrical repairman.

f) To clean: Disconnect the power cord from the mains. Remove the guard and the blades carefully. Do not drop the blades! First use so cloth with light soap to clean o oil stains. Then wipe and polish with dry cloth. Never use polish or any corrosive liquid that will damage the paint, metal or plasc! Put back the blades and lock the guard securely before use.

NO exchange will be entertained if the above instrucons are not followed. Always Test the product rst before purchase.

Correct Disposal of this product

The European Directive 2002/96 /EC on Waste Electrical and Electronic Equipment (WEEE) required that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the material they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product remind you of your

obligaons that when you dispose of the appliance, it must be separately collected.

Besides that, waste baeries and/or accumulator must be removed prior to delivery of WEEE, thought the separated collecon channels provided for this purpose (distributors and/or facilities from Local Authorities).

EMC Directive 2004/108/EC

LOW VOLTAGE DIRECTIVA EEC

EN 60335-1:2012+A11:2014

EN 60335-2-80:2003+A1:2004+A2:2009

EN 62233:2008

Low Voltage Directive 2006/95/EC