MDC3MP-BNDL - Monitor NEC - Free user manual and instructions
Find the device manual for free MDC3MP-BNDL NEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Monitor |
| Model | MDC3MP-BNDL |
| Brand | NEC |
| Display Size | 31.5 inches |
| Resolution | 3840 x 2160 (4K UHD) |
| Aspect Ratio | 16:9 |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms (GtG) |
| Viewing Angle | 178° horizontal / 178° vertical |
| Connectivity | HDMI 2.0 x2, DisplayPort 1.2 x1, DVI-D x1 |
| VESA Mount | 100 x 100 mm |
| Power Consumption | 50 W typical, <0.5 W standby |
| Weight (with stand) | 12.5 kg |
| Dimensions (W x H x D) | 728 x 482 x 230 mm (with stand) |
| Input Voltage | AC 100-240 V, 50/60 Hz |
| Color Support | 1.07 billion colors (10-bit) |
| Panel Type | IPS |
| Speakers | 2 x 5 W built-in |
| Cleaning | Use a soft, dry cloth; avoid harsh chemicals |
| Safety | Complies with IEC/EN 60950-1, UL/cUL |
Frequently Asked Questions - MDC3MP-BNDL NEC
What is the initial setup procedure for the NEC MDC3MP-BNDL monitor?
Connect the monitor to your computer using an HDMI or DisplayPort cable. Plug the power cord into a grounded outlet. Press the power button on the monitor or remote control. The OSD (On-Screen Display) will guide you through language selection and input source.
How do I clean the screen safely?
Turn off the monitor and unplug it. Use a soft, lint-free cloth slightly dampened with water or a screen cleaner. Gently wipe the screen in a circular motion. Do not spray liquid directly onto the screen.
What should I do if the monitor does not power on?
Check that the power cable is securely connected to both the monitor and the power outlet. Ensure the outlet is working. Press the power button again. If the issue persists, try a different power outlet or cable. Refer to the troubleshooting section of the manual.
Can I mount this monitor on a wall?
Yes, the NEC MDC3MP-BNDL supports VESA mount pattern 100 x 100 mm. Use a compatible wall mount bracket and follow the installation instructions provided with the mount.
How do I adjust the display settings (brightness, contrast, etc.)?
Press the Menu button on the monitor to open the On-Screen Display. Use the navigation buttons to select Brightness, Contrast, Color, etc. Adjust values using +/- buttons. Press Menu again to exit.
What is the recommended resolution for the monitor?
The native resolution is 3840 x 2160 (4K UHD). For best picture quality, set your computer's display output to this resolution. The monitor supports lower resolutions with scaling.
Does the monitor have built-in speakers?
Yes, the monitor includes built-in speakers (2 x 5 W). Audio can be played via HDMI or DisplayPort input. To use them, select the monitor as the audio output device in your operating system settings.
How can I reduce eye strain while using the monitor?
Enable the Flicker-Free and Low Blue Light modes in the OSD. Adjust brightness to match ambient lighting. Take regular breaks using the 20-20-20 rule.
What should I do if the image appears blurry?
Ensure the resolution is set to the native 3840 x 2160. Check the cable connection and try a different cable. Access the OSD and perform an Auto Adjust function to optimize clarity.
How do I perform a factory reset?
Press the Menu button, navigate to the Setup or Others menu, and select Factory Reset. Confirm when prompted. This will restore all settings to default values.
User questions about MDC3MP-BNDL NEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual MDC3MP-BNDL - NEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDC3MP-BNDL by NEC.