2in1 3D Professional L-112 - Curling iron Izzy - Free user manual and instructions

Product Type	2-in-1 Hair Straightener & Curler
Brand	Izzy
Model	2in1 3D Professional L-112
Power	50 W
Voltage	AC 110-240 V ~ 50/60 Hz
Plate Material	Ceramic tourmaline with floating plates
Temperature Range	120 °C to 230 °C
Temperature Adjustment	Step adjustment by 10 °C via + / - buttons
Display	LCD screen showing set temperature
Auto Shut-Off	After 60 minutes of inactivity
Swivel Cord	Yes, rotating cord for ease of use
Curved Edges	Allow creation of light curls
Safety Features	Overheat protection, auto shut-off, cool-down mode
Cleaning	Wipe with soft cloth after cooling; no chemical cleaners
Warranty	2 years against manufacturing defects
Intended Use	Domestic only, for hair styling
Recommended Hair	All hair types: thick, fine, curly, permed, or colored

Frequently Asked Questions - 2in1 3D Professional L-112 Izzy

What is the difference between a straightener and a curler with this 2-in-1 device?

The 2in1 3D Professional L-112 features flat ceramic plates with curved edges, allowing you to straighten hair or create light curls by rotating the device while sliding down the hair.

What temperature should I use for my hair type?

For fine or damaged hair, use a lower temperature around 120-160°C. For normal hair, 160-200°C is suitable. For thick or coarse hair, you can go up to 230°C. Always start at a lower temperature and increase if needed.

How do I turn on the device and set the temperature?

Plug in the device, then press the ON/OFF button. The LCD screen will light up and show 160°C initially, then adjust to 100°C as it heats. Use the + and - buttons to adjust temperature in 10°C steps.

Does the device have an auto shut-off feature?

Yes, if the device is left idle for 60 minutes, it will automatically turn off. The screen light will go out. Press the ON/OFF button to restart.

Can I use the straightener on wet hair?

No, the manual recommends washing and 80% drying your hair before use. Using on wet hair can cause damage and is not safe.

How do I clean the device?

Ensure the device is completely cooled and unplugged. Wipe the plates and body with a soft, dry cloth. Do not use chemical cleaners or abrasive materials.

What voltage does the device support? Can I use it internationally?

The device operates on AC 110-240V, 50/60Hz, making it suitable for use in most countries worldwide. However, you may need a plug adapter depending on the outlet type.

Is the device covered by a warranty?

Yes, BENRUBI Company provides a 2-year warranty against manufacturing defects or defective materials from the date of purchase. Keep your receipt.

What should I do if the device malfunctions?

Unplug the device immediately. Contact an authorized BENRUBI Service Centre for inspection and repair. Do not attempt to open or repair it yourself.

Can I leave the device unattended while plugged in?

No, never leave the product unattended when it is plugged in. Always unplug after use and keep it out of reach of children.

USER MANUAL 2in1 3D Professional L-112 Izzy

Two silver hair curlers with black handles, one tilted open and one resting flat (no visible text or symbols)

Thank you for choosing a straightener from IZZY product range.

Hair Straightener LN-112 has ceramic hot tourmaline plates that ensure even heat distribution, straightening the hair without damaging, creating a shiny, smooth finish.

The curved edges of the plate allow you to create light curls.

The appliance is suitable for all types of hair, thick, fine, naturally curly, permed or colored.

Safety interlocks

Please read these instructions carefully before using the appliance and save them for future reference. Please keep the sales receipt for guaranteed purposes (pls see below “Guarantee and Customer Service”) Any us which does not conform to the instructions will absolve IZZY from ar liability.

• Keep this instruction manual for future reference.
• Use the appliance according to the instructions.
  • FOR DOMESTIC USE ONLY.
• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Make sure that children do not use the appliance as a toy.
  • Take special care when using the appliance near children or anyone who is insensitive to heat. Anyone with a reduced sensitivity to heat may not realize when too much heat is directed towards the skin and may suffer as a result.
• Never leave the product unattended when it is plugged in.
• Keep the appliance out of the reach of children.
• Never leave the appliance out of your sight when it is operating.
• Remove any blockage to the heating part of the appliance.

Attention: The unit becomes hot during operation.

- Check that the voltage rating of your appliance does in fact match

that of your household electrical wiring system. Any connection error will render the guarantee null and void.

- Your appliance is intended solely for domestic use, for hair care and within home.

- Unplug your appliance as soon as you have finished using it or before cleaning it.

- Do not use your appliance if it is not working correctly or if it has been damaged. If this happens you should contact an approved BENRUBI service centre.

- Any intervention other than cleaning and normal maintenance by the customer must be carried out by an approved BENRUBI service centre.

- If the power cable or the plug are damaged, do not use your appliance. To avoid any risk, you should contact an approved BENRUBI service centre.

- For your own safety use only IZZY accessories and spare parts which are suitable for your appliance.

- It is not recommended to use the appliance in the bathroom or anywhere that the appliance could get wet.

- If, however, the appliance is used in the bathroom: In order to provide additional protection, it is advisable to install a residual current circuit breaker (RCD) with a rating not exceeding 30mA in the electric circuit supplying the bathroom. Ask your electrician for advice.

- When the straightener is used in the bathroom, unplug it immediately after use, as the proximity of water may pose a hazard, even when the appliance is turned off.

- Hair lacquers and fixing sprays contain flammable material. Do not spray while using the appliance.

- Do not submerge the appliance, the power cable or the plug in water or any other liquid.

- Do not use the hair straightener with wet hands. Do not use the hair straightener near water contained in bathtubs, basins or other vessels. Do not leave or store the straightener near a tub, sink or other place where it will be exposed to water and other liquids or high humidity.

- If, however, the appliance should fall into water, pull the power plug out of the power socket immediately! Never place your hand in the water!! Have your appliance checked by an approved BENRUBI Service center before using again.

• Do not allow the power cable to hang down within reach of children. Make sure that there is no danger that the cable may inadvertently be pulled or cause anyone to trip when in use.
• The power cable must never be allowed to be close to or in contact with the hot parts of your appliance, close to a source of heat or rest on sharp edges.
• Do not place this appliance on or near a hot gas or electric burner, in or where it could touch a heated oven or a microwave oven.
• Never carry or suspend the appliance by the main lead.
• Do not twist or kink the mains lead, and do not wrap it around the appliance.
• Do not place the appliance on surfaces sensitive to heat and especially when still warm. Keep it away from dust, cloths, paper, alcohol or inflammables.
• Avoid any contact between the plates and your skin to prevent any scalds.
  • Always allow the appliance to cool before cleaning and storing.
• Never use the appliance for any other purpose than those described in the instructions.
• Do not use extension cord with this appliance.
• Do not twist or kink the mains lead and do not wrap it around the appliance.
• Do not operate the appliance after it malfunctions or if the mains lead or plug is damaged. There are no user-serviceable parts.
• Do not use the appliance within 1m of any other electrical or electronic appliance (e.g. TV, computer, telephone) as it may cause interference.
• This appliance is not suitable for commercial use nor for use in the open air.
• Incorrect operation and improper use can damage the appliance and cause injury to the user.
• For your safety, this appliance conforms to the applicable standards, regulations and directives of Low Voltage, Electromagnetic Compatibility, Environmental etc.
• If you pass the device on to a third party, these Operating Instructions must also be handed over.

SAVE THESE INSTRUCTIONS

Parts of the Appliance

1. ON/OFF SWITCH
2. Temperature regulator "+" / "-"
3. Main body
4. Floating Ceramic plates tourmaline plates
5. Rotated cord
6. LCD screen

Using the Appliance

• For best results, wash, comb and 80% dry your hair.
• Nonetheless, the appliance can be used for touch ups at any time.
• Check the supply voltage first before using it and then insert the plug.
• Plug in the hair straightener and place on a smooth, dry, flat surface.
• Turn on the appliance with pressing ON/OFF, the display screen will light and "160°" will be shown on it (after 2-4 seconds it will show 100°) which means the appliance is being heated up.
• Starting at the top of the head, next to scalp, select a small section of hair (approx. 2 inches wide and . inch deep) and clamp between the metal plates. Maintaining some tension, slowly slide the tongs down the section of hair from roots to tips. Be careful to avoid touching your hands or scalp with the hot plates.
• Repeat process all over the head, allowing hair to cool before combing through.

• Press “+” / “-” to set temperature. Press “+” to increase the temperature 10^ per step, until it goes to the max. 230^ ; Press “-” to reduce the temperature 10^ per step, until it goes to the min. 120^

• After being heated for 60min without using, the light of screen will go out, and the appliance will stop working and be turned off automatically. Press ON/OFF again to turn it ON.

• After using, press ON/OFF to turn off the appliance. Then the light of the screen will go out, which means the appliance is cooling down.
• Switch the appliance off before putting it down, even if it is "just for a minute".

Care and Cleaning

• When the hair straightener has completely cooled, clean with a soft cloth. Do not use chemical cleaners.
  • Always unplug the appliance:
• Immediately after use
• In case of malfunction
• Before cleaning
• Never use abrasive cleaners or sharp objects (e.g. steel, wood etc.)

Technical Characteristics

Model: L-112

Voltage/ Frequency: AC110-240V \~ 50/60 Hz

Power: 50W

Important Information for Correct Disposal of the Product in Accordance with EC Directive 2002/96/EC

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.

As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Guarantee & Customer Service

• BENRUBI Company guarantees its products for any manufacturing defect or defective materials for a period of two (2) years from the date of purchase or delivery by presenting purchase receipt. If your product malfunctions or you find any defects, please revert to the retail location you have purchased it from or contact an authorized BENRUBI Service Centre. To find the nearest authorized BENRUBI Service Centre, visit our website www.benrubi.gr. It is in the discretion of BENRU Company to replace or repair the defective product.
• The warranty does not cover damages resulting from normal wear, breakage, scaling, improper installation or maintenance of the product, mishandling, abnormal working conditions, failure implement the instructions, conversion or repair of the product by an unauthorized technician who does not belong to the BENRUBI Service Centers.

Also, the warranty does not cover the following indicative factors:

• Stains, discoloration or scratches.
- Burns due to exposure to heat or flame.
- Damage from thermal shock (sudden temperature change or change of voltage).

FOR MORE INFORMATION PLEASE CONTACT:

(NEW) H. BENRUBI & FILS SA

27 Aghiou Thoma str, GR15124, Maroussi – Athens,

Tel./Customer Service: [phone]

e-mail: [e-mail]