KDC350CNGi-G6SR-R2 - Barcode Reader Koamtac - Free user manual and instructions
Find the device manual for free KDC350CNGi-G6SR-R2 Koamtac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rugged Bluetooth Barcode Scanner |
| Model | KDC350CNGi-G6SR-R2 |
| Brand | Koamtac |
| Dimensions (H x W x D) | 6.8 x 3.7 x 2.0 inches (172 x 94 x 51 mm) |
| Weight | 9.6 oz (272 g) |
| Power Source | Rechargeable Li-Ion battery 3.7V, 2300 mAh |
| Battery Life | Up to 14 hours continuous scanning |
| Wireless Connectivity | Bluetooth 5.0 |
| Scan Technology | 1D/2D CMOS image sensor |
| Scan Range | Up to 20 ft (6 m) for 1D codes |
| Memory | Store up to 500,000 barcodes (64 MB RAM) |
| Durability | Withstands multiple drops from 6.6 ft (2m) to concrete |
| Water and Dust Resistance | IP65 rating |
| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Key Features | Ergonomic design, vibration and audio feedback, batch mode |
| Cleaning Instructions | Wipe with a soft, damp cloth using mild soap. Avoid abrasive cleaners. |
| Safety Certifications | FCC, CE, RoHS, IP65 |
| Spare Parts / Repairability | Replacement battery and charging cradle available; service by authorized center |
| Warranty | One-year limited warranty |
Frequently Asked Questions - KDC350CNGi-G6SR-R2 Koamtac
How do I pair the KDC350 with my device via Bluetooth?
Turn on the scanner, put it in discoverable mode by holding the power button for 5 seconds until the LED flashes blue. On your device, go to Bluetooth settings, select 'KDC350-XXXX', and confirm pairing.
What should I do if the scanner does not turn on?
Charge the device for at least 4 hours using the provided USB cable or charging cradle. If it still does not power on, perform a factory reset by pressing the power button and trigger simultaneously for 10 seconds.
How can I clean the barcode scanner?
Use a soft, lint-free cloth slightly dampened with water or a mild soap solution. Wipe the exterior surfaces gently. Avoid getting moisture into the charging port or scanning window.
What types of barcodes can the KDC350 read?
It reads common 1D barcodes (UPC, EAN, Code 128, etc.) and 2D codes (QR, Data Matrix, PDF417).
How do I transfer scanned data to my application?
The scanner can be used in HID keyboard mode (auto-typing) or SPP mode (serial data). Configure via the Koamtac Sync utility or barcode programming codes in the manual.
What is the battery life of the KDC350?
Under typical use (one scan per 5 seconds), the battery lasts up to 14 hours. Standby time exceeds 30 days.
Can I use the scanner without a Bluetooth connection?
Yes, in batch mode. Scanned data is stored in memory and can be transferred later via USB or Bluetooth when connected.
How do I reset the scanner to factory defaults?
Press and hold the trigger button and the power button simultaneously for 10 seconds. Release when the LED flashes red/green. This clears stored data and resets settings.
Is the scanner water and dust resistant?
Yes, it has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction.
Where can I find spare parts or repair service?
Contact Koamtac support or visit the official website for replacement batteries, charging cradles, and authorized repair centers. The device is designed for repairability with accessible modules.
User questions about KDC350CNGi-G6SR-R2 Koamtac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual KDC350CNGi-G6SR-R2 - Koamtac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KDC350CNGi-G6SR-R2 by Koamtac.