KDC350C-G6SR-3K-R2 - Barcode Reader Koamtac - Free user manual and instructions
Find the device manual for free KDC350C-G6SR-3K-R2 Koamtac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Scanner |
| Model | KDC350C-G6SR-3K-R2 |
| Brand | Koamtac |
| Dimensions (W x H x D) | Approx. 70 x 40 x 30 mm |
| Weight | Approx. 100 g |
| Power Source | Rechargeable Li-ion battery, 2000 mAh |
| Battery Life | Up to 12 hours continuous scanning |
| Charging Method | USB-C cable or docking station |
| Connectivity | Bluetooth 5.0, USB HID |
| Barcode Types Supported | 1D (UPC, EAN, Code 39, Code 128, etc.), 2D (QR, Data Matrix, PDF417, etc.) |
| Scan Engine | 2D imager, high speed |
| Read Range | Up to 25 cm for typical barcodes |
| Display | 1.5 inch monochrome OLED, 128x64 pixels |
| Keypad | 5 buttons (scan, power, volume up/down, function) |
| Memory | 16 MB flash for storing barcodes |
| Operating System | Proprietary RTOS |
| IP Rating | IP54 (dust and splash resistant) |
| Drop Protection | 1.5 m drops to concrete |
| Operating Temperature | -10°C to 50°C |
| Cleaning Instructions | Wipe with a soft, dry cloth; mild alcohol solution for disinfection |
| Safety Compliance | CE, FCC, RoHS |
| Spare Parts Available | Battery pack, USB cable, holster, docking station |
| Repair Service | Contact Koamtac authorized service centers |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - KDC350C-G6SR-3K-R2 Koamtac
How do I pair the KDC350C with my smartphone?
Turn on the scanner, press the Bluetooth button, then select 'KDC350C' from your device's Bluetooth list. The default PIN is 0000 if required.
What types of barcodes can the KDC350C read?
It reads both 1D barcodes (UPC, EAN, Code 39, Code 128, etc.) and 2D barcodes (QR, Data Matrix, PDF417, etc.).
How long does the battery last?
The battery lasts up to 12 hours of continuous scanning, depending on usage and scan frequency.
How do I clean the scanner?
Use a soft, dry cloth to wipe the exterior. For disinfection, use a cloth lightly dampened with a 70% isopropyl alcohol solution. Avoid abrasive cleaners.
Can I use the scanner while charging?
Yes, the scanner supports pass-through operation via USB-C cable, allowing scanning while connected to a power source.
What is the read range?
Typical read range is up to 25 cm for standard barcodes, depending on barcode density and lighting conditions.
Does the scanner have memory to store scanned barcodes?
Yes, it has 16 MB flash memory, capable of storing hundreds of thousands of barcodes.
How do I reset the scanner to factory settings?
Press and hold the '+' and '-' keys for 10 seconds until the display shows 'Factory Reset'. Confirm by pressing the scan button.
Is the scanner waterproof?
It has an IP54 rating, meaning it is dust protected and splash resistant, but not fully waterproof. Avoid immersion.
Where can I find replacement batteries or accessories?
Replacement batteries, USB cables, holsters, and docking stations are available from Koamtac or authorized resellers. Check the official website for part numbers.
User questions about KDC350C-G6SR-3K-R2 Koamtac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual KDC350C-G6SR-3K-R2 - Koamtac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KDC350C-G6SR-3K-R2 by Koamtac.