LS-H126UCD0 - Air-conditioner LG - Free user manual and instructions
Find the device manual for free LS-H126UCD0 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner (Wall-mounted indoor unit + outdoor unit) |
| Model | LS-H126UCD0 |
| Brand | LG |
| Cooling Capacity | 3.5 kW (12,000 BTU/h) |
| Heating Capacity | 3.5 kW (12,000 BTU/h) (Heat pump model) |
| Power Supply | 220-240 V, 50 Hz, Single Phase |
| Indoor Unit Dimensions (W x H x D) | 840 x 290 x 200 mm (approx.) |
| Outdoor Unit Dimensions (W x H x D) | 710 x 480 x 240 mm (approx.) |
| Indoor Unit Weight | 10 kg (approx.) |
| Outdoor Unit Weight | 30 kg (approx.) |
| Refrigerant Type | R32 |
| Energy Efficiency Ratio (EER) | 3.8 (approx.) |
| Functions | Cool, Heat (Heat Pump), Dehumidify, Fan, Auto, Sleep Mode |
| Control Type | Remote Control (wireless) and Manual Controls on Unit |
| Air Filter | Washable, antimicrobial filter |
| Noise Level (Indoor) | 29-39 dB(A) (Low-High) |
| Noise Level (Outdoor) | 52 dB(A) (approx.) |
| Operating Temperature Range (Cooling) | 18°C to 46°C |
| Operating Temperature Range (Heating) | -10°C to 24°C |
| Features | Auto Restart, Self Diagnosis, Timer, 24-Hour Timer, Energy Saving Mode |
| Certifications | CE, RoHS |
Frequently Asked Questions - LS-H126UCD0 LG
How often should I clean the air filter?
Clean the air filter every 2 weeks during heavy use. Remove the filter, wash with mild soap and water, dry completely before reinstalling.
Why is my LG air conditioner not cooling properly?
Check if the filter is dirty, the thermostat is set correctly, and the outdoor unit is not obstructed. If issue persists, contact a professional.
Can I use an extension cord for the power supply?
No, do not use an extension cord. Plug directly into a dedicated wall outlet with proper grounding.
How do I set the timer on my LG LS-H126UCD0?
Press the Timer button on the remote. Use +/- to set hours. Press Set to confirm. The unit will turn on/off after the set time.
What does the 'Auto Clean' function do?
The Auto Clean function runs the fan after cooling to dry the evaporator and prevent mold and bacteria growth.
How do I switch between cooling and heating?
Press the Mode button on the remote to cycle through Auto, Cool, Dry, Fan, and Heat modes.
The remote control is not working. What should I do?
Replace batteries with new ones of the correct type. Ensure there is no obstruction between remote and unit. If still not working, check for damage.
Is professional installation required?
Yes, installation must be performed by a qualified technician to ensure proper refrigerant handling, electrical safety, and warranty validity.
What is the recommended room size for this unit?
The LS-H126UCD0 is rated for rooms up to 30-35 m² (approx. 320-380 sq ft) with standard ceiling height.
How do I reset the air conditioner?
Unplug the unit for 5 minutes, then plug it back in. Alternatively, press the Reset button on the indoor unit or remote (if available).
User questions about LS-H126UCD0 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual LS-H126UCD0 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LS-H126UCD0 by LG.