C2.IW - Pregnant Induction Dynamics - Free user manual and instructions
Find the device manual for free C2.IW Induction Dynamics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-wall Speaker |
| Model | C2.IW |
| Brand | Induction Dynamics |
| Woofer Size | 6.5 inches |
| Tweeter Size | 1 inch silk dome |
| Impedance | 8 ohms |
| Power Handling (RMS) | 80 watts |
| Peak Power Handling | 120 watts |
| Frequency Response | 45 Hz - 20 kHz |
| Sensitivity | 88 dB (1W/1m) |
| Cutout Dimensions (W x H) | 8.5 x 12.5 inches |
| Overall Dimensions (W x H x D) | 9.2 x 13.2 x 3.5 inches |
| Weight | 4.5 lbs |
| Mounting Depth | 3.2 inches |
| Grille | White paintable steel |
| Recommended Amplifier Power | 20 - 100 watts per channel |
| Power Source | Passive (no built-in amplifier) |
| Maintenance | Wipe gently with a dry cloth; avoid solvents |
| Safety | Do not expose to moisture or direct sunlight. Ensure proper wall cavity support. |
| Spare Parts / Repairability | Contact support for replacement drivers or grilles. Use only authorized service. |
| General Information | Designed for in-wall installation. Suitable for home theater and stereo systems. |
Frequently Asked Questions - C2.IW Induction Dynamics
What are the cutout dimensions for the C2.IW speaker?
The cutout dimensions are 8.5 x 12.5 inches. Always verify with the included template before cutting.
Is the grille paintable?
Yes, the grille is made of paintable steel. Remove the grille before painting and apply thin coats.
Can I use this speaker with a standard receiver?
Yes, the C2.IW has an 8-ohm impedance and is compatible with most home theater receivers. Ensure the amplifier can deliver 20-100 watts per channel.
How do I connect the speaker wires?
Use the spring-loaded terminals on the back. Strip about 1/2 inch of insulation and press the lever to insert the wire. Ensure correct polarity (+/-).
What is the recommended amplifier power?
The recommended amplifier power range is 20 to 100 watts RMS per channel. Using an amplifier within this range will avoid damage and optimize performance.
Does the speaker come with installation hardware?
Yes, the package includes a cutout template, mounting screws, and a paint shield. Refer to the manual for detailed installation steps.
Can I install the C2.IW in a bathroom or outdoor area?
No, this speaker is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the speaker and void the warranty.
How do I clean the speaker?
Clean the grille and baffle with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners, as they may damage the finish.
What if the speaker sounds distorted?
Check the amplifier power and ensure it's not clipping. Verify wire connections and polarity. Avoid overdriving the speaker beyond its rated power.
Where can I find replacement parts?
Contact Induction Dynamics customer support for service and replacement parts. Use only authorized components to maintain performance and safety.
User questions about C2.IW Induction Dynamics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual C2.IW - Induction Dynamics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C2.IW by Induction Dynamics.