DXR140 - Uncategorized HUSQVARNA - Free user manual and instructions

Product Type	Remote-Controlled Demolition Robot
Brand	Husqvarna
Model	DXR140
Weight	1250 kg (approx.)
Dimensions (L x W x H)	1600 x 750 x 1100 mm (approx.)
Power Source	Electric (400V, 3-phase)
Motor Power	14 kW
Travel Speed	0.5 m/s (max)
Remote Control Range	Up to 100 m (line of sight)
Working Tools	Hydraulic breaker, grapple, crusher (compatible)
Hydraulic Flow	30 L/min (max)
Hydraulic Pressure	170 bar (max)
Traction System	Rubber tracks
Safety Features	Emergency stop, tilt alarm, overload protection
Maintenance Interval	Every 50 operating hours
Spare Parts Availability	Authorized Husqvarna dealers
Operating Temperature Range	-10°C to +40°C
IP Rating	IP54 (control unit)

Frequently Asked Questions - DXR140 HUSQVARNA

What is the maximum weight the Husqvarna DXR140 can handle?

The DXR140 is designed for demolition tasks and can handle breakers up to 140 kg. The robot itself weighs approximately 1250 kg.

How do I perform daily maintenance on the DXR140?

Daily maintenance includes checking hydraulic oil level, inspecting tracks for wear, cleaning air filters, and verifying emergency stop function. Refer to the manual for detailed procedures.

Can the DXR140 be used in wet conditions?

The robot is not fully waterproof. Avoid exposure to heavy rain or submersion. The control unit has an IP54 rating, meaning it is splash-proof but not submersible.

What remote control frequency does the DXR140 use?

It uses a 2.4 GHz radio frequency with a range of up to 100 meters in open areas.

How do I replace the hydraulic hoses on the DXR140?

Hydraulic hoses should be replaced by an authorized technician. Always depressurize the system before removal. Refer to the spare parts diagram in the manual.

What should I do if the robot does not respond to the remote control?

Check the remote control batteries, ensure the emergency stop is not pressed, and verify the antenna connection. If the issue persists, contact support.

What type of breaker is compatible with the DXR140?

The robot is compatible with hydraulic breakers weighing up to 140 kg. Use Husqvarna-approved attachments for optimal performance.

How often should the hydraulic oil be changed?

Change hydraulic oil every 500 operating hours or annually, whichever comes first. Use recommended oil type as per manual.

Is it possible to extend the remote control range?

No, the range is fixed at 100 meters line-of-sight. Obstructions reduce range. Use the robot within the specified range.

Where can I find the serial number on the DXR140?

The serial number is located on a metal plate attached to the chassis near the hydraulic pump.

USER MANUAL DXR140 HUSQVARNA

Simple line drawing of a robotic arm inside a circle (no text or symbols)

Finnish

Koneen osat

1 Sylinterit

Technical line drawing of a mechanical device with articulated arms and a pointed tool (no text or symbols)

Technical line drawing of a mechanical device with articulated arms and a vertical dashed line indicating a reference or measurement (no text or symbols present)

Torni

Technical line drawing of a mechanical device with lever and base (no text or symbols)

Line drawing of a mechanical device with articulated arms and a long rod (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Tukijalat

Line drawing of a mechanical device with articulated arms and a long rod (no text or symbols)

Line drawing of a mechanical device with lever and base components (no text or symbols)

Line drawing of a handheld electronic device with two screwdrivers and a central control panel (no text or symbols)

Technical line drawing of a mechanical component with an arrow indicating assembly or insertion (no text or symbols present)

Diagram of a robotic arm positioned within a dome-shaped structure, with no visible text or symbols.

Line drawing of a construction worker standing beside an excavator on a dirt path (no text or symbols)

Käyttö

Yleistä

Two diagrams showing a rocket launcher system with no visible text or symbols

Mechanical assembly diagram showing a tool interacting with a bracket, with an inset magnified view of a mechanical component (no text or symbols)

Technical line drawing of a mechanical device with an inset showing a tool interacting with a component (no text or symbols present)

Läheisyys reunoihin

Line drawing of a quadrupedal robot with limbs and wheels, no text or symbols present

Line drawing of a mechanical device with no visible text or symbols

Technical line drawing of a mechanical assembly with a central component and mounting holes (no text or symbols)

Line drawing of a handheld electronic device with two ports and a central control panel (no text or symbols)

Technical line drawing of a mechanical device with two cylindrical components and a central component, no visible text or symbols.

Technical line drawing of a handheld device with two ports and a central control panel, showing no text or symbols.

Pure diagram of abstract symbols and arrows without any text or labels

Pure diagram of mechanical parts without any text, numbers, or symbols

Puomi 1 ulos

Pure diagram of mechanical components without any text, numbers, or symbols

Puomi 2 alas

Pure diagram of mechanical components without any text, numbers, or symbols

Puomi 2 ylös

Pure diagram of mechanical or electrical components without any text, numbers, or symbols

Puomit 1 ja 2 ulos

Pure mechanical component icons without any text or symbols

Pure electrical circuit lines without any symbols

Puomi 3 ylös

Pure electrical circuit lines without any symbols

Puomi 3 alas

Pure diagram of mechanical or electrical component symbols without any text or labels

Pure diagram of mechanical components without any text, numbers, or symbols

Pure diagram of mechanical parts without any text, numbers, or symbols

Pure electrical circuit lines without any symbols

Pure diagram of six mechanical or electrical component symbols without any text or labels

Pure diagram of various mechanical or electrical components without any text, numbers, or symbols

Pure mechanical component icons without any text or symbols

Pure electrical circuit lines without any symbols

Asennustila

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Tukijalat

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure mechanical component symbols without any text or labels

Pure mechanical component symbols without any text or labels

graph LR
    A[" "] --> B[" "]
    B --> C[" "]
    C --> D[" "]
    D --> E[" "]
    E --> F[" "]
    style A fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000
    style C fill:#fff,stroke:#000
    style D fill:#fff,stroke:#000
    style E fill:#fff,stroke:#000
    style F fill:#fff,stroke:#000

Pure electrical circuit lines without any symbols

Pure diagram of mechanical components without any text, numbers, or symbols

Pure mechanical component symbols without any text or labels

Pure mechanical component symbols without any text or labels

Kuljetustila

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure mechanical component symbols without any text or labels

Pure electrical circuit lines without any symbols

Pure electrical circuit lines without any symbols

Pure electrical circuit symbols without any text or labels

Pure mechanical component symbols without any text or labels

Pure electrical circuit lines without any symbols

Puomi 2 alas

Pure mechanical component symbols without any text or labels

Puomi 2 ylös

Pure electrical circuit lines without any symbols

Puomit 1 ja 2 ulos

Pure diagram of mechanical components without any text, numbers, or symbols

Pure diagram of abstract geometric shapes without any text, numbers, or symbols

Puomi 3 ylös

Pure mechanical component icons without any text or symbols

Puomi 3 alas

Pure mechanical component icons without any text or symbols

Pure diagram of mechanical components without any text, numbers, or symbols

Pure diagram of abstract geometric shapes without any text, numbers, or symbols

TYÖKALUT

Yleistä

Line drawing of a mechanical component with curved blades and a handle (no text or symbols)

Hydraulinen vasara SB 152

Technical line drawing of a mechanical tool or bracket assembly (no text or symbols)

Betonileikkuri DCR100

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Erillinen työkalu

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Technical line drawing of a mechanical clamp or bracket device (no text or symbols)

Line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Lisävarustepaketit

graph LR
    A["WORK"] --> B["STEEL SHEAR (OTHERS)"]
    B --> C["GRAPPLE"]

WORKING LIGHT (TYÖVALO)

graph LR
    A["SERVICE"] --> B["WORKING LIGHT"]
    B <--> C["ON/OFF"]

Pure mechanical component diagrams without any text, numbers, or symbols

Puomi 2 ylös

Pure mechanical component diagrams without any text, numbers, or symbols

Puomi 3 alas

Pure mechanical component diagrams without any text, numbers, or symbols

Puomi 3 ylös

Pure mechanical component diagrams without any text, numbers, or symbols

Kuljetustila

Puomi 2 alas

Pure mechanical component symbols without any text or labels

Puomi 2 ylös

Pure diagram of mechanical components without any text, numbers, or symbols

Puomi 2 alas

Pure diagram of mechanical parts without any text, numbers, or symbols

Puomi 2 ylös

Pure mechanical component symbols without any text or labels

ASETUKSET

TUNING (SÄÄDÖT)

graph LR
    A["SERVICE"] --> B["TUNING"]
    B --> C["Enter code"]
    C --> D["Hydraulics"]
    D --> E["Joystick"]
    C --> F["Machine type"]
    F --> G["Mating Bluetooth® radio modules"]
    C --> H["Languages"]
    H --> I["Units"]
    C --> J["Back"]
    J --> K["OK"]
    K --> L["Terminal Diagnostics"]

Joysticks (Joystickit)

Huoltokatselmus

Kiinnitykset

Yleistä

Pure technical line drawing of a mechanical component with no text or symbols

Vasaran voitelu

Technical line drawing of a mechanical component with no visible text or symbols

Technical line drawing of a mechanical component with a central circular feature and flanged ends (no text or symbols)

Technical line drawing of a mechanical assembly with no visible text or symbols

Diagram of a mechanical device with a water drop and liquid level, no text or symbols present

Technical line drawing of a mechanical assembly with no visible text or symbols

Technical line drawing of a mechanical device with a cylindrical component and mounting bracket (no text or symbols)

VIANMÄÄRITYS

Virheilmoitukset

2014-05-06