ELCC-TB-KF-60-500-0H-P0-CR - Uncategorized Festo - Free user manual and instructions
Find the device manual for free ELCC-TB-KF-60-500-0H-P0-CR Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Cylinder (Toothed Belt Axis) |
| Model | ELCC-TB-KF-60-500-0H-P0-CR |
| Manufacturer | Festo AG & Co. KG |
| Size | 60 mm (frame width) |
| Stroke Length | 500 mm |
| Drive Type | Toothed belt with linear guide |
| Max. Payload | Approx. 50 kg (depending on speed and acceleration) |
| Max. Speed | Up to 5 m/s |
| Repeat Accuracy | ±0.08 mm |
| Power Supply | 24 V DC (motor) / 24 V DC (encoder/brake) |
| Motor Type | Stepper or servo motor (depending on configuration) |
| Protection Class | IP40 (standard) |
| Operating Temperature | 0°C to +50°C |
| Weight | Approx. 8.5 kg (without motor) |
| Main Functions | Linear motion, positioning, pick-and-place, handling |
| Maintenance | Lubricate toothed belt and guides every 2,000 km or 6 months |
| Cleaning | Wipe with dry cloth; avoid solvents |
| Safety Features | Overload protection via torque limitation; optional holding brake |
| Spare Parts | Belt kit, guide rails, seals, bearings |
| Repairability | Modular design; components replaceable |
Frequently Asked Questions - ELCC-TB-KF-60-500-0H-P0-CR Festo
What is the maximum load capacity of the ELCC-TB-KF-60-500-0H-P0-CR?
The maximum load depends on speed and acceleration, but typically up to 50 kg for horizontal applications. Refer to the selection software for precise values.
How do I connect the motor to the electric cylinder?
The motor is mounted via a flange (KF) and coupled to the belt drive. Use the specified motor adapter kit from Festo. Ensure proper alignment.
What type of lubricant should I use for maintenance?
Use Festo lubricant (e.g., Festo OILS-LUB-20) or a lithium soap grease. Apply sparingly to the toothed belt and linear guides.
Can the stroke be adjusted mechanically?
No, the stroke is fixed at 500 mm. To change stroke, a different model or mechanical stops are required.
What is the repeat accuracy of this axis?
Repeat accuracy is ±0.08 mm under standard conditions. Higher accuracy possible with servo motor and encoder.
Does the cylinder require a separate brake for vertical applications?
Yes, for vertical or slanted applications, an optional holding brake (CR) is recommended to prevent load drop when power is off.
How do I set the home position?
The home position is defined by a proximity sensor or mechanical reference. Follow the controller homing sequence.
What is the maximum speed and acceleration?
Maximum speed is 5 m/s and acceleration up to 50 m/s², depending on load and motor.
Is the product compatible with Festo’s CPX or CECC controllers?
Yes, it can be driven by Festo CECC or CPX controllers with appropriate motor module.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF. It includes installation, wiring, and troubleshooting.
User questions about ELCC-TB-KF-60-500-0H-P0-CR Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ELCC-TB-KF-60-500-0H-P0-CR - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ELCC-TB-KF-60-500-0H-P0-CR by Festo.