SC3010 - Pregnant EVE Audio - Free user manual and instructions
Find the device manual for free SC3010 EVE Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Active 3-way studio monitor |
| Woofer | 10" (254 mm) honeycomb cone |
| Midrange | 4" (100 mm) honeycomb cone |
| Tweeter | AMT (Air Motion Transformer) RS1 |
| Frequency Response | 35 Hz - 21 kHz |
| Total Amplifier Power | 900 W (2 x 300 W LF, 2 x 150 W MF/HF) |
| Max SPL (per pair) | 126 dB |
| Input Connectors | XLR balanced, RCA unbalanced |
| Input Sensitivity | Adjustable via rotary switch (-6 dB to +6 dB) |
| Crossover Frequencies | Low/Mid: 300 Hz, Mid/High: 3000 Hz |
| Controls | Volume, high shelf filter, low shelf filter, input level, XLR/RCA switch |
| Protection | Overload, thermal, and short circuit protection |
| Dimensions (H x W x D) | 470 x 310 x 380 mm (18.5 x 12.2 x 15.0 in) |
| Weight | 14.4 kg (31.7 lb) |
| Cabinet Material | MDF with vinyl laminate |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Power Consumption | Standby: < 1 W, Max: 1200 W |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Standby Auto Off | Can be disabled via rear switch |
| Cleaning | Use a soft, dry cloth; avoid solvents |
| Repairability | Service by authorized technicians; replaceable amplifier module |
Frequently Asked Questions - SC3010 EVE Audio
What is the recommended placement distance from walls?
Place the monitors at least 0.5 meters from walls to avoid bass buildup. Use the rear-panel low shelf filter to compensate for boundary effects.
Can I use the SC3010 with a consumer audio source?
Yes, the monitor accepts both XLR balanced and RCA unbalanced inputs. Use the input level switch to match consumer or pro gear.
How do I connect two monitors?
Connect each monitor independently to your audio interface or mixer. They are active monitors, so no external amplifier is needed. Power each with its own AC cable.
What is the standby power consumption?
In standby mode, the monitor consumes less than 1 W. The auto standby can be disabled with the rear switch for critical listening.
How often should I clean the monitors?
Clean the cabinet with a soft, dry cloth when needed. Do not use water or any cleaning agents as they may damage the finish.
What do the high and low shelf filters do?
The high shelf filter adjusts the treble response (+/- 3 dB above 3 kHz). The low shelf filter adjusts bass (+/- 3 dB below 100 Hz) to adapt to room acoustics.
Is it safe to run the monitors at full volume?
The SC3010 has built-in protection circuits against overload and thermal issues. However, extended operation at maximum level may trigger protection; set levels conservatively.
Can I mount the monitors on a wall?
Yes, the cabinet has mounting points (M8 threaded inserts) for compatible brackets. Ensure the bracket can support the 14.4 kg weight.
What is the warranty on the EVE Audio SC3010?
EVE Audio typically offers a 5-year warranty on active monitors. Check with your retailer or distributor for specific terms.
How do I reset the monitor if it stops responding?
Turn off the monitor, unplug the power cord for 30 seconds, then reconnect and power on. If the issue persists, contact EVE Audio support.
User questions about SC3010 EVE Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SC3010 - EVE Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SC3010 by EVE Audio.