LX-C1 MKII - Pregnant MISSION - Free user manual and instructions
Find the device manual for free LX-C1 MKII MISSION in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf loudspeaker |
| Brand | Mission |
| Model | LX-C1 MKII |
| Dimensions (W x H x D) | 178 x 300 x 250 mm |
| Weight | 5.5 kg per speaker |
| Power Handling (RMS) | 75 W |
| Power Handling (Peak) | 150 W |
| Impedance | 8 Ohms |
| Sensitivity | 88 dB |
| Frequency Response | 48 Hz - 24 kHz |
| Crossover Frequency | 3.2 kHz |
| Driver Configuration | 2-way: 1" tweeter, 6.5" woofer |
| Enclosure Type | Bass reflex (rear port) |
| Recommended Amplifier Power | 25 - 100 W RMS |
| Connection Type | Single-wire binding posts |
| Finish | Black ash, Walnut, or White |
| Grille | Removable magnetic grille |
| Room Placement | Bookshelf or stands (not included) |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid liquids |
| Safety Precautions | Place on stable surface; avoid moisture and extreme temperatures |
| Spare Parts Availability | Contact Mission authorized service centers |
| Repair Information | Refer to user manual for troubleshooting or contact support |
Frequently Asked Questions - LX-C1 MKII MISSION
How do I connect the Mission LX-C1 MKII to my amplifier?
Use standard speaker cables with banana plugs or bare wires. Connect the red terminal to the positive amplifier output and black to negative. Ensure the amplifier is turned off during connection.
What is the recommended placement for best sound?
Place speakers at ear level, at least 20 cm from the rear wall to avoid bass boom. Angle them towards the listening position for optimal stereo imaging.
Can I use these speakers for home theater?
Yes, they work well as front left/right or rear speakers. Pair with a center channel and subwoofer for a complete system.
What amplifier power is suitable?
An amplifier with 25-100 watts RMS per channel is ideal. Avoid underpowered amps that may cause clipping.
How do I clean the speaker grille and cabinet?
Remove the grille gently. Use a soft brush or vacuum on low for the grille. Wipe the cabinet with a slightly damp microfiber cloth, then dry immediately.
Why does the speaker sound distorted at high volume?
Distortion often indicates amplifier clipping or exceeding the speaker's power handling. Lower the volume or ensure the amplifier is not underpowered.
Are these speakers magnetically shielded?
No, they are not shielded. Keep them at least 30 cm away from CRT televisions or other sensitive electronics.
Can I bi-wire or bi-amp the LX-C1 MKII?
The LX-C1 MKII has single-wire terminals only, so bi-wiring is not possible. Use standard single-wire connections.
What is the warranty period?
Mission typically offers a 2-year warranty from the date of purchase. Check with your retailer for specific terms.
How do I break in new speakers?
Play music at moderate volume for 20-30 hours. Avoid very high levels during break-in. The sound will gradually improve in clarity and bass.
User questions about LX-C1 MKII MISSION
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual LX-C1 MKII - MISSION and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX-C1 MKII by MISSION.