IMC110MMSC - Media player StarTech.com - Free user manual and instructions

Product Type	Digital Media Player
Brand	StarTech.com
Model	IMC110MMSC
Dimensions (W x D x H)	150 mm x 100 mm x 30 mm
Weight	0.5 kg
Power Supply	External DC adapter (5V, 2A)
Video Output	HDMI 1.4
Audio Output	HDMI, Optical S/PDIF, 3.5 mm jack
Media Formats Supported	MP4, MKV, AVI, MP3, FLAC, JPEG, PNG
Network Connectivity	Ethernet (10/100), Wi-Fi 802.11 b/g/n
Storage	USB host port for external drives up to 2TB
Memory Card Slot	SD/SDHC card reader
Operating Temperature	0°C to 40°C
Input Voltage	100-240 VAC, 50/60 Hz (adapter)
Included Accessories	Remote control, power adapter, HDMI cable
Warranty	2 years
Maintenance	Clean with a dry, soft cloth. Do not use liquids.
Safety	Keep away from moisture. Do not disassemble.

Frequently Asked Questions - IMC110MMSC StarTech.com

What media formats does the StarTech.com IMC110MMSC support?

The media player supports common formats such as MP4, MKV, AVI for video, MP3 and FLAC for audio, and JPEG/PNG for images.

Can I connect an external hard drive?

Yes, the IMC110MMSC has a USB host port that supports external drives up to 2TB.

Does it have Wi-Fi connectivity?

Yes, it includes built-in Wi-Fi 802.11 b/g/n for wireless streaming.

What video output does it provide?

It features an HDMI 1.4 output for high-definition video and audio.

Is a remote control included?

Yes, the package includes a remote control for convenient operation.

How do I clean the device?

Use a dry, soft cloth to wipe the exterior. Avoid any liquids or chemicals.

What is the power requirement?

The device uses an external adapter with input 100-240V AC and output 5V, 2A.

Can I play media from a USB flash drive?

Yes, simply insert the USB drive into the USB port and navigate using the on-screen menu.

Does it support subtitles?

Yes, it supports external subtitle files in formats like SRT and SUB.

What is the warranty period?

StarTech.com offers a 2-year warranty for the IMC110MMSC.

USER MANUAL IMC110MMSC StarTech.com

10/100 DIN-Rail Industrial Fiber Media Converter

IMC110MMSC

Instruction Manual

Black network device with USB port and external ports (no visible text or symbols)

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Instruction Manual

Table of Contents

Introduction 1

Installation 2

Location 2

Physical Installation ....2

Network Connection ....2

Functionality 3

Connector Pin Layout ....3

Specifications 4

Technical Support 5

Warranty Information .... 5

Introduction

Designed for large, higher speed bandwidth for demanding workgroups that require expansion of fast Ethernet Network in and industrial environment over long distances, the StarTech.com 10/100 DIN-Rail Industrial Fiber Media Converter MM SC (2km) offers industrial grade performance, even in harsh environments.

Featuring convenient DIN Rail mounting and easy to configure installation, the 10/100 Industrial Fiber Media Converter ensures optimum network throughput, helping to prevent unnecessary bottlenecks.

Features

10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX •

Device powers from the Terminal Block power connector •

Din-Rail mounting •

Extends your RJ45 signal over Fiber Ethernet •

Supports 2048 Mac addresses •

Supports a wider temperature range •

Supports IEEE 802.3 10Base-T, 802.3u 100Base-TX and 100Base-FX • industry standards

Package Contents

1 x Instruction Manual •

1 x RJ45 to Fiber Converter •

Installation

Location

When installing the DIN-Rail Industrial Fiber Media Converter, ensure that the chosen location has a temperature between -10^ and 60^ Celsius and a relative humidity less than 95%, non-condensing.

Physical Installation

To install the DIN-Rail Industrial Fiber Media Converter onto a DIN rail, lower the converter onto the DIN rail from above using the slot. Push the front of the converter toward the mounting surface until it audibly snaps into place. Once the converter is in place, connect a DC power adapter to the DC terminal on the rear of the converter, then plug the adapter into a standard DC outlet.

Network Connection

When connecting the DIN-Rail Industrial Fiber Media Converter to the network, ensure that both the converter and the devices being connected to it are powered off and that all connecting cables are available. The following chart dictates the correct cable for each speed and distance:

Speed Connector	Port Speed Half/Full Duplex	Cable	Max. Distance
10Base-T RJ-45 10/20 Mbps		2-pair UTP/STP Cat. 3, 4, 5	100 m
100Base-TX RJ-45	100/200 Mbps	2-pair UTP/STP Cat. 5	100 m
100Base-FX SC, ST	100/200 Mbps	MMF (50 or 62.5μm)	2 km
100Base-FX SC, ST	100/200 Mbps	SMF (9 or 10μm)	15, 40, 75km

Instruction Manual

Connect the cables to the output of the attached network device and then to the input of the DIN-Rail Industrial Fiber Media Converter. Once both devices are powered on, the installation is complete.

Functionality

Connector Pin Layout

The following table shows the functions of each of the pins on the RJ-45 connectors to the 10/100Base-TX ports on the DIN-Rail Industrial Fiber Media Converter:

Pin Regular Port Uplink Port
1	Input Receive Data + Output Transmit Data +
2	Input Receive Data - Output Transmit Data -
3	Output Transmit Data + Input Receive Data +
4	Not Used Not Used
5	Not Used Not Used
6	Output Transmit Data - Input Receive Data -
7	Not Used Not Used
8	Not Used Not Used

Instruction Manual

Specifications

LED Indicators	Port and Power Status
Material	Plastic
Maximum Distance	2 km
Operating Temperature	-10°C to 60°C (14°F to 140°F)
Power Supply	12 to 24V DC, 1.5A
Network Standards	IEEE802.3 10Base-T, IEEE802.3u 100 Base-TX/100Base-DX, IEEE802.3x
Storage Temperature	-25°C to 85°C (-13°F to 185°F)
Connectors	1x RJ45 Female Connector2x Fiber Optic SC Female Connectors

Technical Support

StarTech.com's lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads.

Warranty Information

This product is backed by a one year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Making hard-to-find easy!®

StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan.

Visit www.startech.com today for complete information about all our products and to access exclusive interactive tools such as the Cable Finder, Parts Finder and the KVM Reference Guide.