Ascender Electrol 84756 - Projection screen DA-LITE - Free user manual and instructions
Find the device manual for free Ascender Electrol 84756 DA-LITE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorized Projection Screen |
| Brand | Da-Lite |
| Model | Ascender Electrol 84756 |
| Screen Size (Diagonal) | 100 inches (16:9 aspect ratio) |
| Screen Surface | Matte White |
| Motor Type | Silent AC motor |
| Power Supply | 120V AC, 60Hz |
| Power Consumption | Standby: <1W, Operating: 25W |
| Controls | IR Remote, Wall Switch |
| Installation | Ceiling mount or wall mount (brackets included) |
| Dimensions (Width x Height x Depth) | 87.2 x 49.0 x 4.5 inches (screen); case: 92 x 4.5 x 4.5 inches |
| Weight | 48.5 lbs |
| Drop Time | Approximately 30 seconds |
| Viewing Angle | 160° horizontal, 120° vertical |
| Gain | 1.0 |
| Compatibility | Standard and HD projectors |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Certifications | UL, CE, RoHS |
| Warranty | 2 years limited |
| Included Accessories | Remote control, wall switch, mounting hardware, user manual |
Frequently Asked Questions - Ascender Electrol 84756 DA-LITE
How do I install the Ascender Electrol 84756 screen?
Installation is straightforward. Mount the case to the ceiling or wall using the included brackets. Ensure the surface is level and secure. Connect power and test the remote. Full instructions are in the user manual.
How to clean the screen surface?
Use a soft, dry microfiber cloth to gently wipe the screen. For stubborn marks, slightly dampen the cloth with water and mild soap. Avoid abrasive cleaners or solvents.
The screen does not respond to remote. What to do?
First, check the remote batteries. Replace if needed. Ensure there is a clear line of sight to the screen. If still not working, try the wall switch to rule out remote issues. For persistent problems, consult the troubleshooting section of the manual.
Can I adjust the screen stop position?
Yes, the Ascender Electrol has adjustable limit stops. Refer to the user manual for step-by-step instructions on setting the upper and lower stop positions using the built-in controls.
What power supply is required?
The screen requires a standard 120V AC, 60Hz outlet. It consumes less than 1W in standby and about 25W during operation. Ensure the power cord is safely routed.
What is the screen material?
The screen surface is Matte White, providing a gain of 1.0 and a wide viewing angle. It is compatible with most projectors and offers excellent image clarity.
How to replace the remote control battery?
Slide open the battery compartment on the back of the remote. Remove the old battery and insert a new CR2032 coin cell battery with the positive side facing up. Close the compartment.
Is the screen compatible with 4K projectors?
Yes, the Matte White surface is well-suited for 4K resolution. It provides a smooth, high-contrast image that works with both standard and UHD projectors.
How to troubleshoot if the screen doesn't go up or down?
Check power connection and ensure the wall switch is on. Verify the remote has batteries. If the screen hums but doesn't move, the motor may be jammed. Consult the troubleshooting section of the manual or contact Da-Lite support.
Does the screen have a warranty?
The Ascender Electrol 84756 comes with a 2-year limited warranty covering defects in materials and workmanship. Proof of purchase is required for service.
User questions about Ascender Electrol 84756 DA-LITE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Projection screen in PDF format for free! Find your manual Ascender Electrol 84756 - DA-LITE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ascender Electrol 84756 by DA-LITE.