Caple

SD140BK - Warming Drawer Caple - Free user manual and instructions

Find the device manual for free SD140BK Caple in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Caple SD140BK - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Warming Drawer
Brand Caple
Model SD140BK
Dimensions (H x W x D) 140 mm x 595 mm x 550 mm
Weight 12 kg
Power Supply 220-240 V, 50 Hz
Power Consumption 800 W
Temperature Range 40°C to 70°C
Control Type Electronic control with rotary knob
Capacity 20 liters
Main Functions Gentle warming, plate warming, defrosting, food warming
Material Stainless steel
Safety Features Child lock, overheat protection, automatic shut-off
Installation Built-in undercounter
Maintenance & Cleaning Wipe with a damp cloth; do not use abrasive cleaners
Warranty 2 years
Spare Parts Availability Contact Caple service for genuine parts

Frequently Asked Questions - SD140BK Caple

How do I install the Caple SD140BK warming drawer?
Ensure the drawer is installed in a well-ventilated undercounter space. Follow the dimensions given in the manual (140 mm height). Connect to a 220-240 V power supply. For safety, hire a qualified electrician.
What temperature settings are available?
The warming drawer offers a temperature range of 40°C to 70°C. Use the rotary knob to select the desired level: low for gentle warming, medium for plates, high for hot food.
Can I use the warming drawer for defrosting?
Yes, the defrosting function operates at a lower temperature to safely thaw frozen foods. Place food in a heatproof container and set the temperature to around 40-50°C.
How do I clean the warming drawer?
Clean the interior and exterior with a soft, damp cloth. Use mild detergent if necessary. Avoid abrasive cleaners or scouring pads that could damage the stainless steel finish.
Is the warming drawer safe to leave on overnight?
It is not recommended. The drawer has an automatic shut-off feature after 12 hours of continuous operation, but for safety, turn it off when not in use. Do not leave flammable items inside.
What is the maximum load capacity?
The drawer can hold up to 20 liters of contents or approximately 5 kg. Overloading may affect performance and cause damage.
Can I install the warming drawer under a hob?
Yes, it can be installed under a hob, but ensure there is adequate ventilation. Maintain a minimum gap as per installation instructions to avoid overheating.
How do I activate the child lock?
Press and hold the child lock button (if equipped) for 3 seconds. The control panel will lock, preventing accidental changes. Repeat to unlock.
What should I do if the drawer doesn't heat up?
Check the power supply and ensure the unit is turned on. If the problem persists, the heating element might be faulty. Contact Caple service for repair.
Where can I purchase spare parts for the SD140BK?
Genuine Caple spare parts are available through authorized dealers or directly from Caple customer service. Use only original parts to maintain warranty.

User questions about SD140BK Caple

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Warming Drawer in PDF format for free! Find your manual SD140BK - Caple and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SD140BK by Caple.

USER MANUAL SD140BK Caple

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Caple

Model : SD140BK

Category : Warming Drawer