ColorQube 8700XF - Printer XEROX - Free user manual and instructions
Find the device manual for free ColorQube 8700XF XEROX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Color Multifunction Printer |
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Xerox Solid Ink |
| Print Speed (Color) | Up to 40 ppm |
| Print Speed (Black) | Up to 40 ppm |
| Print Resolution | Up to 2400 x 600 dpi |
| First Page Out | As fast as 5 seconds |
| Duplex Printing | Automatic |
| Input Capacity | 500-sheet tray + 100-sheet multipurpose tray |
| Output Capacity | 500-sheet tray |
| Paper Sizes | Up to 8.5 x 14" (Legal) |
| Scan Speed | Up to 55 images per minute |
| Scan Resolution | Up to 600 x 600 dpi |
| Fax | Yes, with Super G3 |
| Connectivity | Ethernet 10/100/1000Base-T, USB 2.0 |
| Dimensions (HxWxD) | 700 x 640 x 660 mm |
| Weight | 130 kg |
| Power Consumption | Typical 530W, Sleep 5W |
| Operating Temperature | 10-32°C |
| Recommended Monthly Volume | 10,000 - 50,000 pages |
| Warranty | 1 year on-site |
Frequently Asked Questions - ColorQube 8700XF XEROX
How do I clear a paper jam in the Xerox ColorQube 8700XF?
Open the front cover and gently pull out the jammed paper. Check the duplex path and output tray. Refer to the manual for specific locations.
How do I replace the ink sticks?
Open the ink access door and remove empty sticks. Insert new solid ink sticks of the correct color. Close the door and wait for the printer to initialize.
How do I connect the printer to my network?
Use a standard Ethernet cable to connect the printer to your router. On the printer, navigate to Settings > Network and enable TCP/IP. Assign an IP address automatically via DHCP.
Can I print from a mobile device?
Yes, use Xerox Print Service Plugin (Android) or AirPrint (iOS). Ensure the printer is on the same network as your device.
What paper types are recommended?
The printer supports plain paper, recycled paper, transparencies, and labels. Use paper within 60-256 g/m² weight.
How do I perform a calibration?
Go to Settings > Maintenance > Calibration. The printer will print a calibration page and adjust colors automatically.
How do I clean the printer?
Use a soft lint-free cloth to wipe the exterior. For the interior, use the cleaning cycle from the menu. Avoid using liquids inside.
How do I set up secure printing?
Enable Secure Print in the driver settings. The printer will hold the job until you enter a PIN code at the device.
How do I check the printer status?
Press the Home button on the control panel. The screen displays ink levels, paper status, and any error messages.
How do I reset the printer to factory defaults?
Go to Settings > General > Factory Defaults. Confirm the reset. Note that this erases all network settings and customizations.
User questions about ColorQube 8700XF XEROX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual ColorQube 8700XF - XEROX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ColorQube 8700XF by XEROX.