C910dn - Printer LEXMARK - Free user manual and instructions
Find the device manual for free C910dn LEXMARK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Print Technology | Laser |
| Print Speed | Up to 40 ppm (A4) |
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Automatic |
| Processor | 500 MHz |
| Memory | 128 MB (expandable to 512 MB) |
| Paper Input Capacity | Standard 500-sheet tray, plus 100-sheet multipurpose feeder |
| Paper Output Capacity | 250-sheet face-down |
| Connectivity | USB 2.0, Parallel, Ethernet 10/100BaseTX |
| Network Protocol | TCP/IP, IPX/SPX, AppleTalk |
| Power Consumption | Active: 600 W, Sleep: 17 W |
| Dimensions (H x W x D) | 501 x 424 x 574 mm (19.7 x 16.7 x 22.6 in) |
| Weight | 37.2 kg (82 lb) |
| Duty Cycle | Up to 150,000 pages per month |
| Recommended Monthly Volume | 5,000 - 30,000 pages |
| Toner Cartridge Yield | Standard: 10,000 pages; High-yield: 20,000 pages |
| Maintenance Kit | Replace after 150,000 pages |
| Safety Certification | UL, CSA, FCC Class A |
| Operating Temperature | 10°C to 32°C (50°F to 90°F) |
| Humidity Range | 15% to 80% RH |
| Noise Level | 52 dBA (printing), 27 dBA (idle) |
| Warranty | One-year limited onsite |
Frequently Asked Questions - C910dn LEXMARK
How do I clear a paper jam on the Lexmark C910dn?
Open the front cover and remove the toner cartridge. Pull out any jammed paper from the rollers. Check the fuser area and duplex path. Close the cover and press 'Continue'.
What toner cartridge does the Lexmark C910dn use?
The printer uses Lexmark C910H21G black toner cartridge with a yield of 20,000 pages.
How do I replace the toner on the C910dn?
Open the front cover, remove the old toner by pulling the green handle, unwrap the new cartridge, shake it gently, remove the sealing tape, and insert it until it clicks.
Why is my C910dn printing streaky or faded?
Streaks may indicate low toner or a dirty corona wire. Run the 'Cleaning' utility from the printer menu, or replace the toner cartridge.
How do I connect the C910dn to a network?
Connect an Ethernet cable from the printer to your router. From the control panel, go to 'Settings' > 'Network' > 'TCP/IP' and set an IP address (usually DHCP).
What is the correct paper size for the C910dn?
The standard tray supports A4, Letter, and Legal. The multipurpose feeder supports transparencies, labels, and cardstock up to 216 x 356 mm.
How do I reset the maintenance counter on the C910dn?
Press 'Menu' on the control panel, navigate to 'Maintenance', then 'Reset Maintenance Count', and confirm with 'Select'.
My C910dn prints blank pages. What should I check?
Ensure the toner cartridge is not empty and the sealing tape has been removed. Check the printer's status page for errors. Also verify the document contains data.
How can I update the firmware on the Lexmark C910dn?
Download the latest firmware from the Lexmark support website. Transfer it to the printer via FTP or a USB drive using the 'Update Firmware' option in the printer menu.
What does the 'Door Open' error mean on the C910dn?
This error indicates that the front cover or a tray is not fully closed. Firmly push all covers and trays until they click shut. If the error persists, check the sensor.
User questions about C910dn LEXMARK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual C910dn - LEXMARK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C910dn by LEXMARK.