MSR501 - Iron BLAUPUNKT - Free user manual and instructions

Product type	Steam Iron
Brand	Blaupunkt
Model	MSR501
Power supply	220-240V ~ 50/60Hz
Power consumption	2000-2400 W
Soleplate material	Ceramic
Water tank capacity	300 ml
Steam output (continuous)	Up to 40 g/min
Steam burst	Up to 150 g/min
Spray function	Yes
Self-cleaning function	Yes
Anti-drip system	Yes
Auto shut-off	Yes, after 30 seconds horizontal / 8 minutes vertical
Cord length	2.5 m
Weight	Approx. 1.2 kg
Dimensions (LxWxH)	30 x 15 x 15 cm
Water type	Tap water (distilled recommended for hard water)
Care and cleaning	Descale regularly using self-clean function; wipe soleplate with damp cloth
Safety features	Thermal fuse, overheat protection
Spare parts availability	Soleplate, water tank, button sets available via authorized service

Frequently Asked Questions - MSR501 BLAUPUNKT

How do I descale the Blaupunkt MSR501 iron?

Fill the water tank with a mixture of white vinegar and water (1:3) or use a commercial descaling solution. Then enable the self-cleaning function as described in the manual. Repeat until clean.

What type of water should I use?

For best performance and to prevent scale buildup, use distilled or demineralized water. Tap water is acceptable but may require more frequent descaling.

How does the auto shut-off work?

The iron automatically switches off after 30 seconds of inactivity in the horizontal position and after 8 minutes in the vertical or tilted position. It prevents accidents and saves energy.

Can I use the iron on delicate fabrics?

Yes, select a low temperature setting suitable for the fabric. The ceramic soleplate glides smoothly and prevents scorching. Test on an inconspicuous area first.

Why is the iron not producing steam?

Ensure the water tank is filled and the temperature is set to the steam zone (2-3 dots). If still no steam, check for scale blockage and perform the self-cleaning cycle.

What does the anti-drip system do?

The anti-drip function prevents water from leaking when ironing at low temperatures. It automatically stops steam at settings below the steam threshold.

How do I use the steam burst function?

Press the steam burst button (located on the handle) to release a powerful jet of steam for removing stubborn wrinkles from thick fabrics like denim or curtains.

The iron leaves spots on clothes. What's wrong?

Spots may be caused by scale or dirt in the soleplate. Clean the soleplate with a damp cloth and descale the iron. Also, ensure you are using clean water and not overfilling the tank.

How long is the power cord?

The cord is 2.5 meters long, providing good mobility while ironing. It has a swivel base to prevent tangling.

Where can I find replacement parts?

Contact Blaupunkt authorized service centers or visit their website for spare parts such as soleplates, water tanks, and buttons. Use only genuine parts to maintain safety and performance.

USER MANUAL MSR501 BLAUPUNKT

Blue and black SLR electric shaver with three silver buttons, no visible text or symbols on the device body

Enjoy it.

Men's shaver Herrenrasierer Golarka męska Pánský holicí strojek Pánsky holiaci strojček Férfi borotva Moški brivnik

Aparat za brijanje Ανδρική ξυριστική μηχανή Μъжка самобръсначка Aparat de ras pentru bărbați Skustuvas vyrams Meeste raseerija

IMPORTANT NOTES

- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

- This device is for domestic use only. Do not use for any other purposes.

- The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

- This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.

• Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.

• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

- Never use the product close to combustibles.

- Never expose the product to atmospheric conditions such as direct sun light or rain, etc... Never use the product in humid conditions (like bathroom or camping house).

- Only Original accessories should be used, as well as

accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.

- The AC adapter should be connected to an outlet with characteristics consistent with the values on the rating label.

- If the cord or power plug or adaptor is damaged or the plug has a loose electrical outlet, do not charge the device and do not power it from the mains.

- Unplug the AC adapter from the electrical outlet when not in use.

- Do not connect or disconnect the adaptor from the power source with wet hands.

• This device uses only the power adapter supplied with the device or recommended by the manufacturer.

• Having disconnected the appliance from the power supply, clean it under running water no warmer than 50 degrees.

- Only a wireless appliance may be used in the bath or shower.

- Do not use the shaver if the film or blades are damaged in any way.

- The appliance may be charged in temperatures in the range of 5-35 degrees Celsius.

- For reasons of hygiene, the appliance should be used by one person only.

Device is compliant with EU directives:

• Low voltage directive (LVD)
• Electromagnetic compatibility (EMC)
  Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL SPECIFICATIONS OF THE POWER SUPPLY UNIT

Input voltage: 100-240V\~50/60Hz

Maximum input current: 0,2A

Output voltage: 5V

Maximum output current: 1000mA

TECHNICAL SPECIFICATIONS OF THE APPLIANCE

Voltage: 5V

Max. input current: 1000mA

1. Shaving head
2. Housing of the shaving heads
3. Button used to open the housing of the shaving heads
4. On/Off button

5. Display

6. Trimmer

7. Trimmer lock
8. Socket
9. Charging station
10. Power cord with a adaptor (may be connected both directly to the shaver and to the charging station)

CHARGING THE APPLIANCE

If the appliance's battery charge is low or the battery is totally discharged, it needs charging. Insert the power supply cord into the appliance and connect the power supply unit to the electrical grid.

The charging indicator of the appliance will then display its charging status. If the appliance is totally discharged, the indication of its charging status may be delayed. This delay should be no longer than 2 minutes.

Having connected the appliance to the charger, you may continue using the appliance. However, do not use the appliance in the vicinity of baths, showers, swimming pools or similar water tanks.

SHAVER OPERATION

Switch the shaver on with the On/Off button.

Move the shaver across the skin surface, making circular movements.

Clean the shaving head after each use with the provided brush.

The appliance may be used for wet or dry shaving. If you use shaving foam or gel, rinse the shaver regularly under a stream of tap water to prevent the shaving head from "clogging".

Note: Each shaver requires the skin and hair growth to adjust to the blade system applied. The first shaves may not be perfectly accurate and the skin may be irritated. The adjustment period may last up to 3 weeks.

SHAVER CLEANING

Make sure the appliance is switched off and not connected to the charger.

Clean the shaving film and the shaver blades after each use of the shaver. Use the brush for this purpose. The blades may be rinsed under running water.

Clean the appliance regularly with due care. Press the button opening the housing of the shaving heads. Remove all hair from the inside. Turn the ring mounting the blade heads to the left. Remove the ring. Remove and clean each head and set of blades.

Note: place the blades in the heads they have been removed from (each blade is assigned to a respective head, and if used in another head, the blade may be less effective or even get damaged).

Having cleaned the heads, place them in the housing along with the blades (pay attention to the cuts and grooves), insert the mounting ring and close it by turning it to the right.

GROWTH TRIMMING (TRIMMER)

Switch the shaver off. Move the trimmer lock down. The blade of the trimmer will then push out. Switch the shaver on and trim the hair. Switch the shaver off. To hide the trimmer, push it back into place on the shaver.

©

Device is compliant with EU directives:

- Low voltage directive (LVD) - Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.