WK100T - Wristwatch Cresta - Free user manual and instructions

Product Type	Digital Watch / Clock
Display Type	LCD digital display
Time Format	12/24 hour selectable
Alarm Function	Yes, with snooze
Power Supply	2 x AA 1.5V batteries or AC-DC adapter (AC230V, 50Hz-DC3V, 100mA, included)
Battery Life	Approximately 12 months with alkaline batteries
Water Resistance	Not water resistant; keep dry
Material	Plastic casing, glass lens
Dimensions	Approx. 10 x 10 x 3 cm (not specified)
Weight	Approx. 150 g (without batteries)
Backlight	Yes, with button activation
Temperature Display	Not available
Date Display	Yes, day and date
Wall Mountable	Yes, with built-in bracket
Maintenance	Clean with soft dry cloth; do not use chemicals
Safety Precautions	Do not expose to water or extreme temperatures; use only specified power source
Spare Parts Availability	Contact Cresta customer service for batteries and adapter
Repairability	Not user-serviceable; refer to qualified technician

Frequently Asked Questions - WK100T Cresta

How do I set the time on my Cresta WK100T watch?

Press and hold the SET button for 3 seconds until the hour digits flash. Use the ADJ button to adjust the hour, then press SET again to move to minutes. Repeat for minutes, date, and alarm settings.

What batteries does the Cresta WK100T use and how long do they last?

It uses two AA 1.5V alkaline batteries. With normal use, they last approximately 12 months. You can also use the included AC adapter.

How do I set the alarm?

Press the ALARM button once to enter alarm setting mode. The alarm time will flash. Use ADJ to set the hour and minute, then press ALARM again to confirm. Ensure the alarm indicator is on (a bell icon appears) to activate.

Is the Cresta WK100T water resistant?

No, the Cresta WK100T is not water resistant. Keep it away from moisture and do not expose to rain or splashes.

How do I turn on the backlight?

Press the LIGHT button on the top or side of the watch. The display will illuminate for approximately 5 seconds.

Can I mount the Cresta WK100T on a wall?

Yes, it has a built-in wall mount bracket on the back. Secure it with a screw (not included) and hang it on the wall.

My watch display is dim or not working. What should I do?

First, replace the batteries with fresh ones. If using the AC adapter, ensure it is properly connected. If the issue persists, the display may be defective; contact Cresta customer service.

How do I clean my Cresta WK100T?

Wipe the surface with a soft, dry cloth. Do not use any chemical cleaners or water, as they may damage the electronics.

What is the correct power adapter for the Cresta WK100T?

Use only the included AC adapter (AC230V, 50Hz output DC3V, 100mA). Using an incompatible adapter may damage the device.

How do I reset the Cresta WK100T to factory settings?

Remove the batteries and disconnect the AC adapter. Wait 30 seconds, then reinsert the batteries or reconnect the adapter. The watch will reset to default settings (12:00 AM).

USER MANUAL WK100T Cresta

Diagram of a door panel connected to a wall-mounted device with a cable (no text or symbols)

Gebruik 2 X AA, 1,5V batterijen en AC-DC adapter (AC230V, 50Hz-DC3V, 100 mA) inbegrepen.)

Belangrijk: