Hi Floor Design Plus - Heating Argoclima - Free user manual and instructions
Find the device manual for free Hi Floor Design Plus Argoclima in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Floor Heating |
| Brand | Argoclima |
| Model | Hi Floor Design Plus |
| Dimensions (H x W x D) | 70 cm x 30 cm x 30 cm |
| Weight | 5.2 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 2000 W (max) |
| Heating Technology | Fan-assisted ceramic heating |
| Temperature Control | Adjustable thermostat |
| Fan Speed Settings | 2 speeds (high/low) |
| Oscillation | Yes, wide-angle |
| Safety Features | Overheat protection, tip-over switch |
| Noise Level | < 45 dB |
| Coverage Area | Up to 30 m² |
| Control Type | Touch panel + remote control |
| Display | LED digital display |
| Timer | 24-hour programmable timer |
| Filter | Washable dust filter |
| Cleaning and Maintenance | Unplug and wipe with damp cloth; clean filter monthly |
| Repair and Spare Parts | Contact authorized service center; genuine parts available |
| Certifications | CE, RoHS |
Frequently Asked Questions - Hi Floor Design Plus Argoclima
How do I set the timer on the Hi Floor Design Plus?
Press the Timer button on the control panel or remote. Use the +/- buttons to set the desired hours (1-24). The heater will automatically turn off after the set time.
Can I use this heater in a bathroom?
No, this unit is not rated for damp locations. It should be used in dry indoor areas only to avoid electric shock.
How often should I clean the filter?
For optimal performance, clean the dust filter every 2 weeks during heavy use. Remove the filter at the back, wash with water, dry completely before reinserting.
What should I do if the heater tips over?
The heater is equipped with a tip-over switch. If it tips, it will automatically shut off. Simply upright the unit and it will resume normal operation.
Does the remote control come with batteries?
Yes, the remote includes a CR2025 battery pre-installed. Remove the protective tab before first use.
Why does the heater emit a burning smell when first used?
This is normal for new heaters. During initial use, manufacturing residues may burn off. Ensure good ventilation and run the heater at max for a few hours until the smell dissipates.
Can I leave the heater unattended overnight?
While the heater has safety features, it is not recommended to leave it unattended for long periods. Use the timer to set automatic shut-off before sleeping.
How can I save energy with this heater?
Use the thermostat to maintain a comfortable temperature rather than running at max continuously. Set a timer to avoid heating when not needed.
What is the maximum room size for effective heating?
The heater is designed for rooms up to 30 m² (approx. 320 sq ft). For larger spaces, consider multiple units or a higher power heater.
How do I reset the overheat protection?
If the heater overheats, it will shut off automatically. Unplug it, wait 10-15 minutes for it to cool down, then plug it back in and turn it on. If it trips repeatedly, check for obstructions.
User questions about Hi Floor Design Plus Argoclima
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Hi Floor Design Plus - Argoclima and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hi Floor Design Plus by Argoclima.