MDV-450 - Surveillance Camera SWANN - Free user manual and instructions
Find the device manual for free MDV-450 SWANN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Swann |
| Model | MDV-450 |
| Dimensions (approx.) | 120 mm x 80 mm x 70 mm |
| Weight (approx.) | 300 g |
| Power Supply | DC 12V, 1A adapter (included) |
| Video Resolution | 720p HD (1280 x 720) |
| Night Vision | Infrared LEDs, up to 10 meters |
| Field of View | 70° diagonal |
| Motion Detection | Yes, with adjustable sensitivity |
| Audio | Built-in microphone |
| Connectivity | Wired (BNC/RCA composite video) |
| Mounting | Wall or ceiling mount bracket included |
| Weatherproof Rating | IP65 (indoor/outdoor) |
| Maintenance | Clean lens with soft dry cloth; avoid liquids |
| Security | Supports password protection via DVR |
| Spare Parts & Repairability | Contact Swann support for replacement parts |
| General Information | Compatible with Swann DVR systems; user manual available online |
Frequently Asked Questions - MDV-450 SWANN
How do I connect the Swann MDV-450 camera to a DVR?
Use the included BNC cable to connect the camera's video output to the DVR's video input. Connect the power adapter to the camera's DC jack.
Can I use the MDV-450 outdoors?
Yes, the MDV-450 has an IP65 weatherproof rating, meaning it is protected against dust and water jets. However, avoid direct exposure to heavy rain.
How do I adjust the motion detection sensitivity?
Motion detection settings are typically configured through the DVR menu. Refer to your DVR manual for specific steps.
What is the maximum cable length for the video signal?
For optimal signal quality, keep the BNC cable under 100 feet (30 meters). Longer runs may require a signal booster.
Does the camera support audio?
Yes, the MDV-450 has a built-in microphone. Audio is transmitted via the same BNC cable if your DVR supports audio on that channel.
How do I mount the camera?
Use the included mounting bracket. Drill holes for the screws, attach the bracket to the wall or ceiling, then slide the camera onto the bracket and tighten the screw.
What is the night vision range?
The infrared LEDs provide visibility up to 10 meters (33 feet) in complete darkness.
How do I reset the camera to factory settings?
The MDV-450 does not have a reset button. Reset is handled through the DVR; check your DVR's manual for reset instructions.
Can I view the camera remotely?
The MDV-450 is an analog camera. Remote viewing requires a DVR with network capabilities. Connect the DVR to your router and use the manufacturer's app.
What power supply does the MDV-450 use?
It uses DC 12V, 1A. Use only the included adapter or a compatible 12V power supply to avoid damage.
User questions about MDV-450 SWANN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual MDV-450 - SWANN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MDV-450 by SWANN.
