DP-SB1610 - Heating Yamazen - Free user manual and instructions
Find the device manual for free DP-SB1610 Yamazen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heater |
| Brand | Yamazen |
| Model | DP-SB1610 |
| Power Source | AC 220-240V, 50/60Hz |
| Power Consumption | 1600W (max) |
| Heating Type | Convection / Fan forced |
| Dimensions (W x D x H) | approx. 25 x 15 x 30 cm |
| Weight | approx. 2.5 kg |
| Controls | Mechanical rotary switch |
| Heat Settings | Low / High / Fan only |
| Thermostat | Adjustable thermostat |
| Safety Features | Tip-over switch, overheat protection |
| Housing Material | Plastic |
| Color | White / Black (typical) |
| Noise Level | Approx. 45 dB (fan) |
| Coverage Area | Up to 20 m2 |
| Cleaning | Wipe with dry cloth; do not submerge |
| Spare Parts Availability | Contact Yamazen support |
| Warranty | 1 year (typical) |
Frequently Asked Questions - DP-SB1610 Yamazen
What is the optimal temperature setting for the heater?
Set the thermostat to a comfortable level, typically between 18-22°C. The heater will maintain that temperature automatically.
Can I use this heater in a bathroom?
No, this heater is not designed for damp locations. Use only in dry indoor areas.
What should I do if the heater stops working?
Check the power cord and plug. Ensure the tip-over switch is engaged. If problem persists, contact Yamazen support.
How do I clean the heater?
Unplug the heater and allow it to cool. Wipe the exterior with a soft damp cloth. Do not use abrasive cleaners or immerse in water.
Does the heater have an automatic shut-off?
Yes, the heater is equipped with overheat protection and a tip-over switch that turns it off if knocked over.
What is the power consumption in low mode?
In low mode, power consumption drops to approximately 800W. Fan-only mode uses less than 50W.
Can I leave the heater unattended?
It is not recommended. Always unplug the heater when leaving the room or going to sleep.
How do I store the heater during summer?
Clean it thoroughly, wrap the cord, and store in a cool dry place. Ensure dust does not accumulate in the vents.
Why does the heater emit a burning smell?
A slight smell may occur initially from manufacturing residues. If persistent, turn off and check for dust accumulation. If smell continues, contact support.
What should I do if the heater falls?
Immediately unplug it. Inspect for damage. If the heater appears intact, place it on a stable surface and it should operate normally due to the tip-over switch.
User questions about DP-SB1610 Yamazen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual DP-SB1610 - Yamazen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DP-SB1610 by Yamazen.
USER MANUAL DP-SB1610 Yamazen
natural_image
Illustration of two cartoon-style devices: a bed with sleeping face and a smartphone with angry expression (no text or symbols)
禁止
natural_image
Cartoon illustration of a child lying in bed next to a sad face on a tablet (no text or symbols)- 低温やけどの原因になります。
接触禁止
natural_image
Illustration of two hands holding a rectangular device with a cross symbol, connected to an electrical outlet (no text or symbols present)natural_image
Illustration of a baby pointing at a display board with abstract symbols (no text or labels)注意
natural_image
Technical line drawing of a mechanical component with an arrow indicating a feature (no text or symbols present)平らな安定した場所に置きます
警告
指示に従う