Yamazen

EFLC-60VE - Ignition Yamazen - Free user manual and instructions

Find the device manual for free EFLC-60VE Yamazen in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Yamazen EFLC-60VE - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electronic Ignition / Gas Lighter
Brand Yamazen
Model EFLC-60VE
Category Ignition
Dimensions Approx. 20 x 2.5 x 1.5 cm
Weight Approx. 50 g
Fuel Refillable butane gas
Ignition Type Piezoelectric spark ignition
Flame Temperature Up to 1300°C
Adjustable Flame Yes
Continuous Operation Lockable trigger for continuous flame
Refillable Yes, with standard butane canisters
Safety Lock Child-resistant safety switch
Maintenance Clean nozzle with compressed air after use
Storage Keep away from direct sunlight and heat sources
Spare Parts Butane refill cans widely available
Warranty Refer to Yamazen official warranty policy

Frequently Asked Questions - EFLC-60VE Yamazen

How do I refill the Yamazen EFLC-60VE?
Turn the flame adjuster to the lowest setting. Insert the canister nozzle into the refill valve at the bottom and press firmly for 5-8 seconds. Wait a few minutes for the gas to stabilize before use.
Can I take this lighter on an airplane?
According to IATA regulations, torch lighters are generally prohibited in carry-on and checked luggage. However, simple lighters are allowed in carry-on if approved. Check with your airline as the EFLC-60VE may be considered a torch lighter.
How do I adjust the flame height?
Use the sliding control on the side. Move it toward the '+' sign to increase flame height, and toward the '-' sign to decrease it. Always adjust before igniting.
What type of butane gas should I use?
Use high-quality purified butane gas. Low-grade butane may clog the nozzle. Look for butane labeled 'premium' or 'triple-filtered' for best performance.
Why doesn't the spark ignite?
Check if the gas tank is empty. If gas is present, inspect the ignition electrode for dirt and clean it gently with a cotton swab. Also ensure the safety lock is disengaged.
How do I clean the lighter?
Use a dry cloth to wipe the exterior. For the nozzle, use a can of compressed air to remove dust and debris. Do not use water or liquid cleaners.
Can I use it for candles?
Yes, the adjustable flame allows precise use for candles, but be cautious of the high flame temperature. Keep the flame away from the wax to avoid melting the lighter body.
How long does a full refill last?
Depending on usage and flame setting, a full refill (approx. 10 ml of butane) provides roughly 20-30 minutes of continuous flame time.
Does the EFLC-60VE have a child safety lock?
Yes, it features a child-resistant safety switch. Slide it to the unlock position for operation. Always engage the lock when not in use.
Why is the flame flickering?
Flickering may indicate low gas pressure or an obstructed nozzle. Refill the lighter and clean the nozzle. Allow the lighter to reach room temperature if it's cold.

User questions about EFLC-60VE Yamazen

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Ignition in PDF format for free! Find your manual EFLC-60VE - Yamazen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EFLC-60VE by Yamazen.

USER MANUAL EFLC-60VE Yamazen

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Yamazen

Model : EFLC-60VE

Category : Ignition