KAMN27Q1FSA - Monitor Kogan - Free user manual and instructions
Find the device manual for free KAMN27Q1FSA Kogan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monitor |
| Brand | Kogan |
| Model | KAMN27Q1FSA |
| Screen Size | 27 inches |
| Resolution | 2560 x 1440 (QHD) |
| Refresh Rate | 165Hz |
| Response Time | 1ms (MPRT) |
| Panel Type | IPS |
| Aspect Ratio | 16:9 |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle | 178°/178° |
| Connectivity | HDMI 2.0 x2, DisplayPort 1.4 x1, USB-C (DP Alt Mode) x1, Audio Out |
| Power Consumption | 35W (Typical), 0.5W Standby |
| Weight (with stand) | 5.6 kg |
| Dimensions (with stand) | 615 x 450 x 200 mm |
| VESA Mount | 100 x 100 mm |
| Adjustability | Tilt (-5° to +20°), Height (110mm), Swivel (±180°), Pivot (90°) |
| Special Features | FreeSync Premium, HDR10, Low Blue Light, Flicker Free |
| In the Box | Monitor, Stand, Power Cord, HDMI Cable, DisplayPort Cable, Quick Start Guide |
Frequently Asked Questions - KAMN27Q1FSA Kogan
How do I connect my monitor to a PC?
Use the included HDMI or DisplayPort cable. For USB-C connectivity, connect a USB-C cable from your device to the monitor's USB-C port. Ensure the monitor is set to the correct input source using the OSD joystick button.
What resolution and refresh rate are supported?
The monitor supports up to 2560x1440 at 165Hz over HDMI 2.0 or DisplayPort 1.4. For 165Hz, DisplayPort is recommended. Adjust settings in your display adapter properties.
How do I enable FreeSync?
FreeSync Premium can be enabled in the OSD menu under 'Game' settings. You also need to enable FreeSync in your graphics card driver (e.g., AMD Radeon Software). Ensure a compatible DisplayPort or HDMI cable is used.
My monitor shows 'No Signal'. What should I do?
Check that the cable is securely connected to both the monitor and the PC. Press the joystick to change the input source. Try a different cable or port. Restart your computer.
How do I clean the screen?
Turn off the monitor and unplug it. Use a soft, lint-free microfiber cloth slightly dampened with water or a screen-cleaning solution. Gently wipe the screen in a circular motion. Do not spray liquid directly on the screen.
What is the warranty period?
The Kogan KAMN27Q1FSA comes with a standard 1-year warranty. For more details, refer to the warranty card included in the box or contact Kogan support.
Can I mount this monitor on a wall?
Yes, it supports VESA 100x100 mm mounts. Remove the stand and attach a compatible wall mount arm or bracket. Ensure the wall mount can support at least 5.6 kg.
How do I adjust the monitor height and tilt?
To adjust height, press down on the top of the monitor while lifting or lowering the stand. To tilt, hold the bottom edge and tilt forward or backward. The monitor also swivels and rotates for portrait mode.
What do I do if there are dead pixels?
Many monitors allow a small number of stuck or dead pixels. If the issue is excessive, contact Kogan support. Some monitors have a pixel policy; check your warranty.
How do I access the on-screen display (OSD) menu?
Move the joystick button located at the bottom edge of the monitor to open the main OSD menu. Navigate using the joystick to adjust settings like brightness, contrast, input source, and game modes.
User questions about KAMN27Q1FSA Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Monitor in PDF format for free! Find your manual KAMN27Q1FSA - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KAMN27Q1FSA by Kogan.