VACN-N-A1-16B-EX2-N - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free VACN-N-A1-16B-EX2-N Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Valve Terminal |
| Brand | Festo |
| Model | VACN-N-A1-16B-EX2-N |
| Number of Valves | 16 |
| Valve Width | 16 mm |
| Pneumatic Connection | G1/8 (input / output) |
| Operating Pressure | 2.5 ... 8 bar |
| Fluid | Compressed air, filtered, lubricated or non-lubricated |
| Ambient Temperature | -5 ... 50 °C |
| Protection Class | IP65 (with plug connector) |
| Electrical Connection | Multipole, 25-pin D-Sub or fieldbus |
| Supply Voltage | 24 V DC |
| Power Consumption | Typically 0.5 W per valve |
| Weight | Approximately 1.2 kg |
| Dimensions (L x W x H) | 260 x 45 x 60 mm |
| Function | Distributed valve terminal for decentralized automation |
| Explosion Protection | EX2 (Zone 1/21, gas/dust) |
| Maintenance | Clean with dry, oil-free air; check seals periodically |
| Safety | Observe local regulations for explosive atmospheres |
| Spare Parts | Coil, seal kit, sub-base module available |
| Repairability | Modular design; individual valves replaceable |
Frequently Asked Questions - VACN-N-A1-16B-EX2-N Festo
What is the operating voltage of the Festo VACN-N-A1-16B-EX2-N?
The valve terminal operates on 24 V DC.
How many valves does this terminal have?
It has 16 valves (16B).
What is the IP rating of the VACN-N-A1-16B-EX2-N?
The protection class is IP65 when properly connected.
Can this valve terminal be used in explosive atmospheres?
Yes, it is certified EX2 for use in Zone 1/21 (gas and dust).
What is the maximum operating pressure?
Maximum operating pressure is 8 bar.
How do I connect the electrical wiring?
It uses a multipole 25-pin D-Sub connector or fieldbus interface.
What maintenance does the valve terminal require?
Periodically clean with dry, oil-free compressed air and check seals for wear.
Can individual valves be replaced?
Yes, the modular design allows easy replacement of individual valve modules.
What type of fluid can be used?
Compressed air, either lubricated or non-lubricated, filtered.
Where can I find spare parts?
Spare parts like coils, seal kits, and sub-base modules are available from Festo or authorized distributors.
User questions about VACN-N-A1-16B-EX2-N Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual VACN-N-A1-16B-EX2-N - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VACN-N-A1-16B-EX2-N by Festo.