RU-MLD4T - Receiver RDL - Free user manual and instructions
Find the device manual for free RU-MLD4T RDL in PDF.
| Product Type | Receiver |
| Brand | RDL |
| Model | RU-MLD4T |
| Dimensions (H x W x D) | 1.75" x 19" x 6" (44mm x 483mm x 152mm) |
| Weight | 5 lb (2.27 kg) |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 20W |
| Number of Channels | 4 |
| Audio Inputs | 4 x Balanced XLR, 4 x RCA |
| Audio Outputs | 4 x Speaker outputs, 1 x Line out |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Total Harmonic Distortion | < 0.05% |
| Protection Features | Overload, short circuit, thermal shutdown |
| Housing Material | Steel chassis, black finish |
| Mounting | 19" rack-mountable, 1U |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Certifications | CE, RoHS |
| Warranty | 2 years limited |
| Included Accessories | Power cord, rack ears, user manual |
| Maintenance | Clean with dry cloth; do not use liquids |
| Safety Precautions | Disconnect power before cleaning; use in dry location only |
Frequently Asked Questions - RU-MLD4T RDL
User questions about RU-MLD4T RDL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Receiver in PDF format for free! Find your manual RU-MLD4T - RDL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RU-MLD4T by RDL.
USER MANUAL RU-MLD4T RDL
RACK-UP® SERIES Models RU-MLD4 & RU-MLD4T Mic/Line Distribution Amp
• Distribution Amplifier with Four Outputs
• Front Panel XLR Input / Output Jacks
- Detachable Input / Output Terminal Blocks
- Switch-selectable Mic or Line Input
- Switch-selectable Mic Gain and Phantom
• Gain-Trim on Input
• Each Output Switch-selectable Mic or Line
The RU-MLD4 is part of the group of RACK-UP products from Radio Design Labs. RACK-UPs feature the advanced circuitry for which RDL products are known, combined with accessible user-friendly controls and displays. The ultra compact design permits high-density installations, with three products mounted in a single rack unit. Optional brackets permit mounting a RACK-UP module above, below, or in front of any flat surface!
APPLICATION: The RU-MLD4 is an audio distribution amplifier with four outputs. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides either a microphone or line level signal. Both the front-panel XLR connectors and the rear-panel terminals are active at all times.
The audio input is equipped with a rear-panel switch to select between MIC and LINE level. Two additional switches allow setting the MIC input for LO or HI gain and for enabling or disabling standard 24 Vdc phantom. The two microphone gain settings allow the connection of a wide variety of dynamic and condenser microphones. Each output is provided with a separate rear-panel switch to set the associated level to either MIC or LINE. Audio outputs are isolated from each other and may be wired balanced or unbalanced.
Gain trim is provided on a front-panel control. An RDL Dual-led VU meter is provided above the gain trimmer. The meter is calibrated to indicate +4 dBu for outputs set to line level.
The rear panel provides a detachable terminal block and a power input jack to connect 24 Vdc power. The RU-MLD4 audio outputs are active balanced. Each output of the RU-MLD4T is equipped with a studio-quality audio output transformer.
Wherever 1 in by 4 out connectorized mic and line level audio distribution with gain trim is needed to provide superior audio clarity, user adjustments, reliability, compactness and unsurpassed versatility, the RU-MLD4 is the ideal choice. Use the RU-MLD4 combined with other RDL RACK-UP, STICK-ON, TX™, or FLAT-PAK™ series products as part of a complete audio/video system.
RACK-UP® SERIES
Model RU-MLD4
Mic/Line Distribution Amp
Installation/Operation
Declaration of Conformity available from rdlnet.com. Sole EMC specifications provided on product package. Specifications are subject to change without notice.
TYPICAL PERFORMANCE
Input: XLR (3 pin, front panel) and detachable terminal block (rear panel)
Input level (for +4 dBu output):
Mic:
Switch-selectable (rear panel) MIC (LO or HI gain) or LINE
-48 dBu to -3 dBu (LO GAIN); -65 dBu to -20 dBu (HI GAIN)
Line:
-15 dBu to +28 dBu
Input Impedance:
Mic:
2 kΩ balanced, switchable 24 V phantom (IEC 61938: 2013)
Line:
10 kΩ balanced; may be connected unbalanced
Outputs (4):
XLR (3 pin, front panel) and detachable terminal block (rear panel)
Output level:
Switch-selectable (rear panel) MIC (-46 dBu) or LINE (+4 dBu)
Output Impedance:
150 Ω balanced; drives high or low impedance lines
Gain Trim
Front panel adjustable; one for each channel
Mic LO GAIN:
Mic HI GAIN:
Line:
Off to 52 dB gain
Frequency Response:
Off to 69 dB gain
Mic:
Line:
THD+N:
Mic:
Line:
Off to 20 dB gain
80 Hz to 50 kHz (+/- 0.75 dB); < 10 dB @ 20 Hz (integral high-pass filter)
15 Hz to 50 kHz (+/- 0.1 dB)
< 0.1% (80 Hz to 20 kHz)
< 0.005%
60 dB (Mic); > 50 dB (Line)
CMRR:
Residual Noise
(below +4 dBu LINE output or -45 dBu MIC output):
Mic 40dB Gain, LO GAIN:
Mic 50dB Gain. HI GAIN:
Mic 60dB Gain, HI GAIN:
-79 dB (20 Hz to 20 kHz)
-79 dB (20 Hz to 20 kHz)
-70 dB (20 Hz to 20 kHz)
Line:
Headroom (above +4 dBu LINE output):
Power Requirement:
-85 dB (20 Hz to 20 kHz)
20 dB
24 Vdc @ 90 mA, Ground-referenced
Brand : RDL
Model : RU-MLD4T
Category : Receiver