RCW-404 - Vacuum Cleaner WINIA - Free user manual and instructions

Product Type	Upright Vacuum Cleaner
Brand	Winia
Model	RCW-404
Dimensions (L x W x H)	30 x 25 x 110 cm
Weight	5.5 kg
Power Supply	220-240V, 50/60Hz
Power Consumption	1200 W
Suction Power	300 Air Watts
Dust Capacity	1.5 L
Filtration System	HEPA H13 filter
Noise Level	78 dB
Cord Length	8 m
Cleaning Mode	Carpet and Hard Floor
Accessories Included	Crevice tool, upholstery tool
Maintenance	Washable dust container and filter
Safety Features	Overheat protection, automatic shut-off
Spare Parts Availability	Filters and brushes replaceable
Warranty	2 years

Frequently Asked Questions - RCW-404 WINIA

How do I assemble the Winia RCW-404 vacuum cleaner?

The vacuum comes partially assembled. Attach the handle to the main body by aligning the grooves and pushing until it clicks. Then connect the hose and desired tool.

How do I clean the HEPA filter?

Turn off and unplug the vacuum. Remove the dust container and take out the HEPA filter. Tap it gently to remove dust or rinse with water and let it dry completely before reinstalling. Do not use detergent.

What is the dust capacity of the RCW-404?

The dust container holds approximately 1.5 liters. Empty it when the 'max' line is reached.

Can I use this vacuum on hardwood floors?

Yes, the RCW-404 is suitable for both carpets and hard floors. The brush roll can be turned off for hard floor cleaning.

How do I replace the brush roll?

Remove the bottom plate by unscrewing the screws. Slide out the old brush roll and insert the new one. Ensure the belt is correctly aligned. Replace the plate and screws.

Why does the vacuum shut off unexpectedly?

This may be due to overheating or a clog. Check the filter and hose for blockages. Allow the vacuum to cool for 30 minutes before restarting. Overheated protection is a safety feature.

What accessories are included with the RCW-404?

The package includes: a crevice tool for tight spaces and an upholstery tool for furniture. Additional tools may be purchased separately.

How long is the power cord?

The power cord is 8 meters long, allowing a wide cleaning range without unplugging.

Is the dust container washable?

Yes, the dust container is designed to be washable. Remove it from the vacuum, empty the dust, and rinse with water. Make sure it is completely dry before putting it back.

Where can I purchase replacement filters?

Replacement filters and parts can be ordered through the Winia website or authorized dealers. Use model RCW-404 to ensure compatibility.

USER MANUAL RCW-404 WINIA

Line drawing of a vacuum cleaner with attached hose and base, shown from front and side (no text or symbols)

CONTENT

1. Importance & Safety 2
2. Structure and Components.... 3
3. Dust Empty and Maintenance 7
4. Trouble shooting 9
5. Technical Data Require....9

1. IMPORTANCE&SAFETY

Welcome to use our vacuum cleaner. You should read the manual before operation to make sure safety. Please keep the manual properly for reference later

• Your vacuum cleaner is a electric appliance: it should be operated under normal conditions. Basic precautions should always be followed to reduce the risk of fire, electrical shock, and injure to person, including the following:
• Material listed as following should not be sucked in, otherwise it may damage the appliance(cause fire, or injure to persons)

A. Hot material, such as ashes, flaming cigarette.
B. Big piece of scraps, such as glass.
C. Poison material(impregnant, corrosive), erosive material(acid material, detergent).
D. Any flammable or volatile liquid as gasoline or alcohol goods.

When not operation, cut off the power. Remove plug from the wall socket before any service like clean, check or repair. Never switch off the appliances by pulling the plug.

Do not strongly pull the power cord from body.

Avoid to pull or fold the hose, otherwise may cause deformation or damage.

- Make sure the rated voltage of the appliance is conform with the supplied power. Do not let the power cord go through sharp material to avoid damage.

Do not immerse the appliance into water, or never put the appliance directly in sun or near any heater or the like to avoid deforming of the plastic components or fire accident..

Never move the appliances by pull the power cord

Never let children paly the appliance to avoid suddenness.

Do not operate the vacuum cleaner if happens following conditions:

A. The appliance be drop down and operates abnormally obviously.
B. Power cord is damaged

You should take the appliance to the authorized maintenance store if happen conditions listed above.

Never operate the appliance when the inlet has been blocked to avoid heat or deforming of the plastic component or damage of the motor.

The power wire and the motor of this productor joined in type Y, so if the power wire is damaged, it should be changed with special tools, so you must go to the authorized maintenance for change.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard

2. STRUCTURE AND COMPONENTS

A. Structure figure

B. Operation Guidance

1. Take out the Inhale Plug by pressing the button according to the direction indicated, in the figure at left side.

Line drawing of a medical device with tubing and a cap (no text or symbols)

1. Open the Rear cover according to the direction indicated in the figure at left side.

Line drawing of a hand using a vacuum cleaner to interact with a car (no text or symbols present)

1. After opening the Rear Cover, take out the water barrel by grasping the groove up forward according to the direction indicated out in the figure.

Line drawing of a mechanical device with internal components and an upward arrow indicating motion (no text or symbols)

1. Adding water of proper capacity before operation. Refer to the figure at the left side.

Line drawing of a car interior with a water bottle pouring liquid into the air (no text or symbols)

NOTE:

Adding about 0.5 liter water, refer to the figure.

1. Posit the barrel into the machine after adding water, and make sure that the barrel is setting in proper position in the machine.

Line drawing of a car interior with hand and seat, showing mechanical components and a close-up detail (no text or symbols)

Replace the Rear Cover Plug in the Inhale	Plug into the unit.
Set in the adjustable tube into the Cured Tube and make sure the connection is firm.	Use of the Telescopic chrome extension tube. Adjust the the tube to a proper length by pressing the control button. And the tube will be lock automatically after releasing the button.

Startup and Speed Control

Plug in power cord, press the power switch to startup the machine. Press inching switch on the big handle to control speed. 4 steps of speed control is available.

Line drawing of a car's air purifier with attached plug and control panel (no text or symbols)

Suction Power Control

It is very easy and convenient to control the suction power by push the pusher on the Curved Tube.

Combination floor nozzle

This double-duty brush can be use for cleaning carpet, floor. Adjust the duty of the brush for bare floor cleaning and carpet cleaning by press the relative button. When the floor nozzle extends out brush, it is for bare floor, if without, for carpet.

Diagram of a vacuum cleaner's clamped component with an arrow indicating force direction (no text or symbols)

Press the accessory cover and release, the over will be open auto., Take out the accessories.When use, insert it into the telescope tube.
Combination nozzle is use for cleaning gap, corner, baseboard and liner gap. The nozzle head can be rotate to the mode of nozzle and brush.	Use the small brush can avoid to injuring surface of funiture and carpet.	Use for place of dustfull,but the floor nozzle can not reach to.

Blowing FunctionInsert the inhale plug into the Rear cover, startup the vacuum cleaner

Stop working of the machinePress the power switch, pull out the plug from the socket, rewind the power cord by pressing the rewinder switch and hold the plug at the mean time to avoid being injured.

DisposalDispose the hose around the telescopic tube, park the floor nozzle onto the side of machine body by a hook on the floor nozzle.

3. DUST EMPTY AND MAINTANANCE

A. Empty Dust

• Take out the water barrel from the machine.

Line drawing of a car interior showing steering wheel, dashboard, and rear wheel (no text or symbols)

- Pour out the sewage and rinse the barrel under water.

Illustration of a bucket pouring liquid into a potted plant (no text or symbols)

A. Maintenance

- Take the filtration rack apart from the machine according to the direction indicated in the figure at left side.

Technical line drawing of a mechanical device with internal components and a directional arrow (no text or symbols)

- Take out the filter, cleaning in water and let it dry naturally.

Importance:

1. The filter should be cleaned twice a year. Or if it is visibly dustied, clean it at once.
2. when operation, dustbag should be fit in.
3. Check if the dust bag is fitted in properly or been damaged before use the machine once.

Diagram of a medical device with an arrow pointing to a magnified inset showing internal components (no text or symbols)

1. Pull the HEPA cover button and open the Cover

NOTE: Before turn down the unit, take out the water barrel to avoid water pouring out.

1. After open HEPA cover, take out the HEPA, dispose dust on the HEPA.

NOTE:

HEPA should be cleaned at least once a year.

Technical line drawing of a robotic car interior with a sensor or sensor connected to a terminal block (no text or symbols present)

1. Fit the clean HEPA in the machine, replace the cover of HEPA, lock the cover by pushing the button of the cover.

Technical diagram of a mechanical component with directional arrows and labeled parts (no readable text or symbols)

1. Open the Air Inhale Window

Diagram of a mechanical component with directional arrow indicating rotation (no text or symbols)

1. Take out the Air Inhale Window and Air Inhale Filter, clean the filter by water and dry it in air.

graph TD
    A["Start"] --> B{Decision}
    B -->|Yes| C["Output Box"]
    B -->|No| D["End"]

NOTE:

The Air Inhale Filter should be clean at least once a year.

1. Fit in the Air Inhale Filter and Window.

Technical line drawing of a mechanical component with internal parts and a circular feature, no visible text or symbols

4. TROUBLE SHOOTING

NOTE:

Cut off power and pull out the plug before starting to get rid of troubles.

If the vacuum power decreasing, and sounds abnormally, stop vacuuming or motor over heat.

1. Some vaccum components may be blocked

- dredge the blocked component.

1. Filter been blocked

- clean or replace;

If the trouble still exists, please contact our maintenance service department.

5. TECHNICAL DATA REQUIRE

Rated Voltage 220-24	0V~ Max Vacuum ≥15kpa
Rated Frequency 50Hz Noise ≤74db(A)
Rated Power 1200W
Protection Class Class II Electric Appliance

If there has any question about this Manul Instruction, Please contact authorized maintenance service department. If there has service dept. Near you, please contact our headquarter service center.

Comments:

If the products have improvement, and have a discrepancy with this manual slightly, we do not send again.

You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal center.