TA2113B - Car Audio Installation Kit Scosche - Free user manual and instructions

Brand	Scosche
Model	TA2113B
Product Type	Car Stereo Installation Kit
Compatibility	2012-up Toyota Yaris
DIN Options	Single DIN and Double DIN
Included Components	7102 pocket, 7324 brackets, 7325 brackets, 6761 pocket assembly, TAO2B harness, LSAAB antenna adapter
Wiring Harness	TAO2B (1987-up Toyota)
Antenna Adapter	LSAAB (2002-up Lexus)
Safety Precautions	Disconnect negative battery terminal; avoid factory airbag wiring
Installation Tools Required	Panel removal tool (PRT), 8mm socket
Technical Support	Toll-free: 1-800-621-3695 x3
Mounting Type	Dash mount with brackets
Material	High-grade plastic and metal brackets
Color	Black (typical)
Rear Support	Available separately (recommended for structural integrity)
Reference Manual	Downloadable PDF from Scosche

Frequently Asked Questions - TA2113B Scosche

Is the Scosche TA2113B compatible with all 2012 Toyota Yaris models?

Yes, the TA2113B is designed specifically for 2012-up Toyota Yaris vehicles. It includes all necessary brackets and wiring harnesses for a seamless fit.

Can I install a single DIN or double DIN stereo with this kit?

Yes, the kit supports both single DIN and double DIN installations. For single DIN, use the included 7102 pocket and 6761 pocket assembly. For double DIN, mount the stereo directly to the brackets.

What tools are required for installation?

You will need a panel removal tool (PRT) to unclip dash panels and an 8mm socket to remove the factory radio bolts. A volt/ohm meter is recommended for wiring checks.

Does the kit include a wiring harness?

Yes, it includes the TAO2B harness compatible with 1987-up Toyota vehicles, allowing easy connection of your aftermarket stereo to the factory wiring.

Is an antenna adapter included?

Yes, the kit includes the LSAAB antenna adapter for 2002-up Lexus vehicles, which is compatible with the Toyota Yaris antenna.

Do I need to disconnect the battery before installation?

Yes, it is crucial to disconnect the vehicle's negative battery terminal before installation to prevent electrical damage or short circuits.

How do I remove the factory stereo?

Use the panel removal tool to unclip the dash panel and radio bezel. Then unscrew the four 8mm bolts securing the radio and unplug the connectors. Detailed steps are in the manual.

What should I avoid during installation?

Avoid all factory airbag wiring to prevent accidental deployment. Also avoid using a test light on wiring; use a volt/ohm meter instead to prevent damage to the vehicle's computer.

Is technical support available?

Yes, Scosche provides toll-free technical support at 1-800-621-3695 extension 3. You can also download the manual from their website.

Does the kit include a rear support bracket?

A rear support bracket is not included but is available separately. It is recommended to add structural integrity to the stereo installation.

USER MANUAL TA2113B Scosche

INTRODUCTION/PRELIMINARY

This premium installation kit is for 2012-Up Toyota Yaris vehicles. Included are all the parts you need to mount your car stereo or CD player into your vehicle's dash. Refer to the individual instruction in this manual to remove your vehicle's factory radio and assemble the kit.

CAUTION

DISCONNECT YOUR VEHICLE'S NEGATIVE BATTERY TERMINAL BEFORE THE INSTALLATION TO HELP PREVENT ELECTRICAL DAMAGE. WE RECOMMEND THE USE OF A VOLT/OHM METER OVER A TEST LIGHT TO CHECK WIRING. A TEST LIGHT OR GROUNDED WIRE PROBE CAN CAUSE DAMAGE TO THE VEHICLE'S COMPUTER AND/OR DIAGNOSTIC SYSTEMS. AVOID ALL FACTORY AIRBAG WIRING - AIRBAGS CAN ACCIDENTALLY DEPLOY CAUSING SERIOUS INJURY OR DEATH.

NOTES

• See your vehicle's instructions for any special tools your installation might require.
• Read all instructions accompanying your car stereo for proper wiring and mounting instructions.

FACTORY WIRING CODES

For Factory Wiring Codes go to: www.scosche-cars.com

CAR STEREO CONNECTORS

PROVIDE EASY CONNECTION OF YOUR CAR STEREO TO FACTORY WIRING HARNESS.

TAO2B

1987-up Toyota Harness

LSAAB

2002-up Lexus Antenna Adapter

TAO2B

LSAAB

LIABILITY DISCLAIMER

This instruction booklet is based on carefully documented data and research of automobile dash disassembly, wire harness/codes and information pertaining to installation of this kit (TA2113B) in 2012 Toyota Yaris vehicles. Scosche Industries, Inc. cannot be held responsible for discrepancies/inconsistencies that may occur due to the automobile manufacturing changes or options, or damage that may occur in the automobile during the installation of components while using this booklet.

If you have any further questions, call our toll free technical help line at: 1-800-621-3695x3

FACTORY STEREO REMOVAL

2012 TOYOTA YARIS

1. Use Panel Removal Tool (PRT) to unclip and remove dash panel surrounding the radio bezel.
2. Use PRT to unclip the radio bezel. Unplug and remove.
3. Unscrew (4) 8mm bolts securing the radio. Unplug and remove.

MOUNTING THE STEREO

SINGLE DIN MOUNT

1. Attach 7102 pocket to 7324 and 7325 brackets using supplied screws.
2. Align and attach aftermarket single din stereo to 7324 and 7325 brackets and 6761 pocket assembly using the screws supplied with the stereo.
3. Reconnect aftermarket stereo. Screw brackets and stereo assembly into dash opening, and finish reassembly

DOUBLE DIN MOUNT

1. Align and attach aftermarket Double din stereo to 7324 and 7325 brackets using the screws supplied with the stereo.
2. Reconnect aftermarket stereo. Screw brackets and stereo assembly into dash opening, and finish reassembly.

NOTE: REAR SUPPORT AVAILABLE SEPARATELY. REAR SUPPORT OF THE STEREO ADDS TO THE INSTALLATION'S STRUCTURAL INTEGRITY.