LPCV21URM - Uncategorized LinkedPRO - Free user manual and instructions
Find the device manual for free LPCV21URM LinkedPRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Camera |
| Brand | LinkedPRO |
| Model | LPCV21URM |
| Video Resolution | 1920 x 1080 (Full HD) |
| Image Sensor | 2MP CMOS |
| Lens | 4mm fixed lens |
| Field of View | 80° (diagonal) |
| Night Vision | Up to 30m with IR LEDs |
| Compression | H.265 / H.264 |
| Frame Rate | 30 fps |
| Audio | Built-in microphone |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | <5W |
| Connectivity | RJ45 Ethernet |
| Storage | microSD slot (up to 128GB) or NVR |
| Mounting | Wall or ceiling mount |
| Weatherproof | IP66 |
| Operating Temperature | -10°C to 50°C |
| Weight | 300 g |
| Dimensions | 120mm x 70mm x 60mm |
| Security | Password protection, HTTPS |
| Compatibility | ONVIF, iOS/Android app |
Frequently Asked Questions - LPCV21URM LinkedPRO
How do I reset the camera to factory defaults?
Press and hold the reset button on the back of the camera for 10 seconds until you hear a beep. The camera will reboot and all settings will be restored to factory defaults.
Can I view the camera remotely?
Yes, download the LinkedPRO Viewer app on your smartphone or tablet, and follow the setup wizard to add the camera via its serial number or QR code. Ensure your camera is connected to the internet.
What is the maximum microSD card capacity?
The camera supports microSD cards up to 128GB. Use a Class 10 or higher card for optimal recording performance.
How do I mount the camera?
Use the included mounting bracket and screws. Drill holes into the wall or ceiling, insert anchors, and attach the bracket. Then slide the camera onto the bracket and tighten the locking screw.
Does the camera support audio recording?
Yes, the camera has a built-in microphone for audio recording. Audio is synchronized with video and can be enabled or disabled in the settings.
How to update firmware?
Visit the LinkedPRO support website and download the latest firmware. Log into the camera's web interface, go to Firmware Update, upload the file, and follow the instructions. Do not power off during update.
What is the night vision range?
The camera provides up to 30 meters of night vision using infrared LEDs. The IR automatically turns on in low light conditions.
Can I use PoE?
Yes, the camera supports Power over Ethernet (802.3af). Connect a PoE switch or injector to provide both power and data over a single Ethernet cable.
Is the camera weatherproof?
Yes, it has an IP66 rating, meaning it is protected against dust and strong water jets, suitable for outdoor use.
What if I forget the password?
Perform a factory reset (see question 1). After reset, the default username is admin and the password is admin. Change the password immediately after first login.
User questions about LPCV21URM LinkedPRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LPCV21URM - LinkedPRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LPCV21URM by LinkedPRO.