BX-252IP5 - Security Camera Provision-ISR - Free user manual and instructions
Find the device manual for free BX-252IP5 Provision-ISR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | BX-252IP5 |
| Brand | Provision-ISR |
| Resolution | 2 MP (1920 x 1080) |
| Lens | 2.8 mm fixed lens |
| Night Vision | Up to 30 m with IR LEDs |
| Power Supply | 12V DC / PoE (802.3af) |
| Power Consumption | Max 10 W |
| Dimensions (W x H x D) | 70 mm x 180 mm x 70 mm |
| Weight | 0.5 kg |
| Weather Rating | IP67 |
| Operating Temperature | -30°C to 60°C |
| Video Compression | H.265+ / H.265 / H.264 |
| Network Interface | RJ45 10/100 Mbps |
| Audio | Built-in microphone and speaker |
| Storage | MicroSD card up to 256 GB |
| Main Functions | Motion detection, line crossing, intrusion detection, smart tracking |
| Maintenance | Clean lens with soft dry cloth; check cable connections periodically |
| Safety | Use only supplied power adapter; mount securely; avoid exposure to extreme conditions |
| Spare Parts and Repairability | Contact authorized service center; do not disassemble |
| General Information | Supports ONVIF, RTSP, remote access via smartphone app (ProvisionCAM) |
Frequently Asked Questions - BX-252IP5 Provision-ISR
How do I reset the camera to factory defaults?
Press and hold the reset button (usually located near the Ethernet port) for 10 seconds using a paperclip. The camera will reboot with default settings.
Can I use this camera without a PoE switch?
Yes, you can power the camera using a 12V DC adapter (sold separately). Connect the adapter to the camera's power input.
What is the default IP address of the camera?
The default IP is 192.168.1.100. You can change it via the ProvisionCAM app or web interface.
How do I access the camera remotely?
Ensure the camera is connected to the internet. Download the ProvisionCAM app on your smartphone, create an account, and add the camera by scanning its QR code or entering its serial number.
Is the camera compatible with third-party NVRs?
Yes, it supports ONVIF Profile S and RTSP protocols, allowing integration with most third-party NVRs and software.
What should I do if the night vision is not working?
Check if the IR LEDs are enabled in the camera settings. Ensure there is no strong light source near the camera that might interfere with the light sensor. Also verify the power supply is sufficient.
How do I update the firmware?
Download the latest firmware from the Provision-ISR website. Access the camera's web interface, go to Maintenance > Upgrade, and upload the firmware file. Do not power off during the update.
Can I record continuously to a MicroSD card?
Yes, the camera supports continuous recording or motion-triggered recording to a MicroSD card (up to 256 GB). Configure the recording schedule in the camera settings.
The camera shows a blurry image. How can I fix it?
Clean the lens with a soft, dry cloth. If the issue persists, check the focus adjustment (if manual) or ensure the camera is not positioned behind glass or plastic that may cause distortion.
How do I set up motion detection alerts?
Open the camera's web interface or the ProvisionCAM app, go to Event > Motion Detection, enable it, and draw the detection zone. Then configure notification settings to receive alerts via email or push notification.
User questions about BX-252IP5 Provision-ISR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual BX-252IP5 - Provision-ISR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BX-252IP5 by Provision-ISR.