IQFC-WiredCasCtrl - Controller ElectriQ - Free user manual and instructions
Find the device manual for free IQFC-WiredCasCtrl ElectriQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | ElectriQ |
| Model | IQFC-WiredCasCtrl |
| Product Type | Wired Controller |
| Compatibility | ElectriQ split air conditioners |
| Dimensions | 86 x 86 x 20 mm |
| Weight | Approx. 100 g |
| Power Supply | 5V DC from indoor unit |
| Display Type | LCD |
| Backlight | Yes |
| Buttons | On/Off, Mode, Fan Speed, Temp +/-, Timer, Sleep, Swing, Turbo |
| Temperature Range | 16°C - 30°C |
| Modes | Cool, Heat, Fan, Dry, Auto |
| Fan Speeds | Low, Medium, High, Auto |
| Timer | 1 - 24 hours (On/Off) |
| Sleep Mode | Yes |
| Child Lock | Yes |
| Installation | Wall-mounted with low-voltage wiring (not included) |
| Temperature Unit | °C / °F switchable |
| Cleaning | Wipe with a soft, dry cloth |
| Safety | Low voltage, CE certified |
| Repair | Contact ElectriQ service center; do not disassemble |
Frequently Asked Questions - IQFC-WiredCasCtrl ElectriQ
How do I install the IQFC-WiredCasCtrl controller?
Mount the controller on a wall using screws (not included). Connect the low-voltage wiring from the indoor unit to the controller terminals. Ensure power is off before installation. Refer to the manual for wiring details.
Is the controller compatible with all ElectriQ air conditioners?
The IQFC-WiredCasCtrl is designed for ElectriQ split air conditioners with a wired controller interface. Check your AC manual or contact ElectriQ support for compatibility.
Does the controller have a battery?
No, the controller is powered directly by the indoor unit via the wiring. No batteries are required.
How do I switch between Celsius and Fahrenheit?
Press and hold the Mode button for 5 seconds to toggle between °C and °F. The display will update.
What do I do if the display is blank?
Check the wiring connections to the indoor unit. Ensure the AC is powered on. If the problem persists, contact ElectriQ support.
How do I set the timer?
Press the Timer button. Use the +/- buttons to set the desired time (1-24 hours). Press Timer again to confirm. The timer can be set for auto-on or auto-off.
Can I use this controller to control multiple AC units?
No, one controller is intended for one indoor unit. For multiple units, separate controllers are needed.
How do I reset the controller?
To reset to factory settings, press and hold the On/Off and Mode buttons simultaneously for 5 seconds. The display will flash and reset.
What does the 'Child Lock' feature do?
Child Lock disables all buttons to prevent accidental changes. To activate, press and hold the Temp + and Temp - buttons for 3 seconds. Repeat to unlock.
How do I clean the controller?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners. Ensure the controller is dry before use.
User questions about IQFC-WiredCasCtrl ElectriQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual IQFC-WiredCasCtrl - ElectriQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IQFC-WiredCasCtrl by ElectriQ.