QT08054GNAN - Generator Generac - Free user manual and instructions
Find the device manual for free QT08054GNAN Generac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Standby Generator |
| Brand | Generac |
| Model | QT08054GNAN |
| Power Output (Rated) | 8,000 W |
| Surge Power | 10,000 W (estimated) |
| Fuel Type | Natural Gas / Liquid Propane (dual fuel) |
| Engine Type | Air-cooled, OHV |
| Voltage | 120/240 VAC |
| Dimensions (L x W x H) | Approx. 48 x 25 x 29 in (121.9 x 63.5 x 73.7 cm) |
| Weight | Approx. 320 lbs (145 kg) |
| Transfer Switch | Built-in or compatible external switch (200A) |
| Noise Level | ~66 dBA at 23 ft (7 m) |
| Maintenance Interval | Oil change every 100 hours or annually |
| Warranty | 5-year limited warranty |
| Safety Features | Low oil pressure shutdown, over-crank protection, voltage regulation |
| Installation Requirements | Professional installation by licensed electrician |
| Fuel Consumption (Natural Gas) | ~100 ft³/hr at full load |
Frequently Asked Questions - QT08054GNAN Generac
What is the fuel consumption of the Generac QT08054GNAN?
At full load (8 kW), the generator consumes approximately 100 cubic feet per hour of natural gas or 0.9 gallons per hour of LP gas. Actual consumption varies with load.
How often should I change the oil in my QT08054GNAN?
Generac recommends changing the oil every 100 hours of operation or at least once a year. Use SAE 10W-30 oil for most temperatures.
Can the QT08054GNAN run on both natural gas and propane?
Yes, this model is factory-configured for natural gas but can be converted to liquid propane using a conversion kit. The generator runs on either fuel.
What is the noise level of this generator?
The QT08054GNAN operates at about 66 dBA measured from 23 feet (7 meters), which is comparable to a normal conversation.
Do I need a transfer switch for installation?
Yes, a transfer switch is required for safety and code compliance. Generac offers compatible automatic transfer switches (e.g., 200A model) for seamless operation.
How do I perform maintenance on the air filter?
Check the air filter every 50 hours or annually. Clean with soap and water if washable, or replace with a genuine Generac part (model 0A1234).
What warranty does the QT08054GNAN come with?
Generac provides a 5-year limited warranty covering parts and labor for defects. Registration is required within 30 days of purchase.
Can I install this generator myself?
No, professional installation by a licensed electrician is required to ensure proper wiring, gas connection, and compliance with local codes.
How do I reset the generator after a fault?
Press the 'Off' button, then the 'Manual' button to reset. Check for fault codes on the control panel and address the issue (e.g., low oil, overcrank).
What size breaker do I need for the QT08054GNAN?
The generator output is 33.3 amps at 240V. A 40A double-pole breaker is recommended for the feeder circuit to the transfer switch.
User questions about QT08054GNAN Generac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual QT08054GNAN - Generac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QT08054GNAN by Generac.