AR4P08 - Pan ARDES - Free user manual and instructions
Find the device manual for free AR4P08 ARDES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Radiant Electric Heater |
| Brand | Ardes |
| Model | AR4P08 |
| Dimensions (W x D x H) | 25 x 15 x 30 cm |
| Weight | 2.5 kg |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Maximum Power | 2000 W |
| Min / Max Power | 1000 W / 2000 W |
| Recommended Heating Area | Up to 20 m² |
| Adjustable Thermostat | Yes, with 3 positions |
| Heating Modes | Hot, warm, fan only |
| Heating Element Type | Stainless steel sheathed resistance |
| Overheat Protection | Yes, automatic shut-off |
| Frost Protection | No |
| Oscillation Function | No |
| Remote Control | No |
| Control Type | Mechanical knobs |
| Noise Level | < 40 dB |
| Maintenance and Cleaning | Unplug, let it cool, wipe with a damp cloth |
| Spare Parts Available | Yes (heating element, switch, thermostat) |
| Repairability | Repairability index: 7/10 |
| Warranty | 2 years |
| Color | White / Black |
| Usage | Indoor use only |
Frequently Asked Questions - AR4P08 ARDES
How to use the thermostat?
Turn the thermostat knob to the desired position (1 to 3). The higher the number, the higher the temperature. The unit automatically stops when the room temperature reaches the set level.
How to clean the AR4P08 heater?
Unplug the unit and wait for it to cool completely. Wipe the exterior with a slightly damp cloth. Do not use abrasive products or solvents.
What if the unit does not heat?
First check that the unit is plugged in and the thermostat is set to a higher position. If the problem persists, the thermal fuse may have tripped. Contact customer service.
Can I use the heater in a bathroom?
No, this unit is not designed for damp rooms. Use it only in dry, well-ventilated rooms.
How to change a fuse?
Unplug the unit. Open the fuse compartment located on the plug or on the back of the unit. Replace the defective fuse with a fuse of the same type and amperage (often 10A). Close the compartment.
Does the unit make noise?
The noise level is below 40 dB, equivalent to a slight hum. There may be expansion noise during heating, which is normal.
What is the maximum heated area?
The AR4P08 heater is suitable for heating a room of 15 to 20 m², depending on insulation.
Can I use an extension cord?
Yes, provided it has sufficient cross-section (at least 1.5 mm²) and is fully unwound to avoid overheating.
How to avoid burning smells?
During first use, a burning smell is normal. Make sure the unit is clean and nothing is blocking the ventilation grills. Never cover the unit.
Where to find spare parts?
Spare parts (heating element, switch, thermostat) are available from Ardes after-sales service or on specialized websites. Consult the manual for references.
User questions about AR4P08 ARDES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pan in PDF format for free! Find your manual AR4P08 - ARDES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AR4P08 by ARDES.