BML-08-B - Headphones BRIGMTON - Free user manual and instructions

Product Type	Over-Ear Wireless Headphones
Brand	Brigmton
Model	BML-08-B
Connectivity	Bluetooth 5.0
Driver Diameter	40 mm
Frequency Response	20 Hz - 20 kHz
Impedance	32 Ω
Battery Capacity	300 mAh
Battery Life	Approximately 20 hours
Charging Time	2 hours
Dimensions	200 x 160 x 80 mm
Weight	250 g
Main Functions	Wireless music streaming, hands-free calling, volume control, track skip
Care Instructions	Clean with a soft, dry cloth. Do not use liquids or abrasive cleaners.
Safety Warnings	Avoid long-term use at high volume to prevent hearing damage.
Spare Parts Availability	Not specified; contact Brigmton support for replacement parts.

Frequently Asked Questions - BML-08-B BRIGMTON

How do I pair the Brigmton BML-08-B headphones with my device?

Turn on the headphones by holding the power button. The LED will flash red and blue. Enable Bluetooth on your device and select 'BML-08-B' from the list. If prompted, enter PIN 0000.

How long does the battery last on a full charge?

The headphones provide approximately 20 hours of playtime on a full charge. Actual battery life may vary depending on volume level and usage.

How do I charge the headphones?

Use the included Micro USB cable to connect the headphones to a USB power source (e.g., computer, wall adapter). The LED indicator turns red during charging and blue when fully charged.

Can I use the headphones while charging?

Yes, you can use the headphones in wired mode while charging, but Bluetooth functionality may be disabled during charging. It is recommended to charge before use.

What do the LED indicators mean?

Red and blue flashing: pairing mode. Slow blue flash: connected. Solid red: charging. Blue off: fully charged.

How do I control music playback?

Use the on-ear controls: press the + button to increase volume, - to decrease. Press the multifunction button once to play/pause, twice to skip forward, three times to skip backward.

Are the headphones compatible with all Bluetooth devices?

The headphones support standard Bluetooth 5.0 and are compatible with most devices that support A2DP and HFP profiles, including smartphones, tablets, and laptops.

Can I use the headphones with a wired connection?

Yes, the package includes a 3.5mm audio cable for wired use. This also works when the battery is depleted.

How do I clean the headphones?

Wipe the ear cushions and headband with a soft, slightly damp cloth. Avoid getting moisture into the openings. Do not use harsh chemicals.

What should I do if the headphones won't connect?

Ensure the headphones are in pairing mode (LED flashing). Reset by turning off and on. If problem persists, clear the Bluetooth pairing list on your device and try again.

USER MANUAL BML-08-B BRIGMTON

Black and white photo of a BRIGHTN brand earband with earphones and earbuds (no text or symbols visible)

BML-08-B-N

AURICULAR BLUETOOTH

Black and white photo of a BRIGHTN earband with earphones and earplands (no text or symbols visible)

BML-08-B-N

BLUETOOTH HEADSET

Instruction Manual

PAIRING

Before using your headset for the first time, you must pair with a Bluetooth enabled phone.

AUTO-PAIRING

1. Move the power switch to ON. When the headset enters pairing mode, the LED will show a steady blue light.
2. From the Bluetooth menu of your phone look new devices and select BML-08 to pair with your phone.
3. Once pairing is completed correctly, you will hear "Pairing completed".
4. Some phones may request permission to access the list of phone contacts.

The device will automatically switch off if not paired after 3 minutes.

MANUAL PAIRING

• With the headset off, press the call button and move the power switch to the "ON" side at the same time.
• When the headset enters pairing mode, the LED will show a steady blue light. Repeat the automatic pairing process.

MULTIPLE CONNECTIONS

The device can connect to two phones at once:

- Pair the headset to your Bluetooth enabled phones.

- Turn off the handset.

- With the power off, press the CALL button and move the power switch in the "ON" side, as described in the manual pairing process.

- Pair and connect the headset with another phone, which will be the primary phone.

- Once the phone is paired and connected, go back and connect the other.

AUTO RECONNECT

If the device is turned off (either accidentally or intentionally) when turn it on it will automatically connect with the paired phone.

OUT OF RANGE

• If the associated devices are separated by an interval of more than 10 meters, the headset and the phone is switched off and the headset will vibrate to alert.
• If the handset and the phone does not automatically reconnect when they are within range, press the CALL button to manually connect again.

CHARGING BATTERY

- When charging, the LED indicator will show a steady red light.

Low Battery: The device will indicate that the battery is low once every two minutes. If the battery is not charged, it will burn.

CALLS

• When you receive a call, the device will vibrate.
• Briefly press the button to stop Vol- vibration.
• Briefly press the CALL button to answer.

VOICE DIALING

- Press the call button to activate voice dialing.

Note: If your phone does not support voice dialing, it is possible that the implementation of this action activates the last number dialed.

TRANSFERRING A CALL

- During a call on your phone, hold the Vol + button for 3 seconds to transfer the call.

CALL WAITING

• To answer a second call without ending the current call, press the CALL button for 1 second (you will hear a beep). Press the CALL button for 1 second to return to the original call.
• Press the CALL button to end the active call or two calls at once.

PLAYING MUSIC

• PLAY: Press the PLAY / PAUSE button.
• PAUSE: Press the PLAY / PAUSE button.
• STOP: Press and hold the PLAY / PAUSE button.
• NEXT TRACK: Press the FF button.
• PREVIOUS TRACK: Press the REW button.

"Features can change without notice"

Imported: I.R.P., S.L.

DECLARATION OF CONFORMITY

I.R.P., SL declares under our responsibility that the equipment meets the requirements indicated in the following directives:

DIRECTIVAS EMC

Directive EMC 2004 / 108 / EC

EN301489

EN60950

EN300328

Description of apparatus:

BRIGMTON Model BML-08

Wireless headphones

Importer: I.R.P., SL

Address: Avenida Santa Clara de Cuba 5, 41007, Sevilla.