FC-690 O - Security Camera FLIR - Free user manual and instructions
Find the device manual for free FC-690 O FLIR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Security Camera |
| Brand | FLIR |
| Model | FC-690 O |
| Category | Outdoor Security Camera |
| Dimensions (W x H x D) | 7.5 x 6.8 x 5.2 inches |
| Weight | 1.5 lbs |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Resolution | 2 MP (1920 x 1080) |
| Lens | 2.8 mm fixed, F2.0 |
| Field of View | 94° (horizontal) |
| Night Vision | IR LEDs, up to 30 m range |
| Ingress Protection | IP66 |
| Video Compression | H.264, MJPEG |
| Motion Detection | Yes, configurable zones |
| ONVIF Compatible | Yes (Profile S) |
| Maintenance | Clean lens with soft, dry cloth |
| Security | Password protection, encrypted video stream |
| Operating Temperature | -20°C to 50°C |
| Manual Pages | 66 |
Frequently Asked Questions - FC-690 O FLIR
How do I connect the FLIR FC-690 O camera to my network?
Connect the camera via Ethernet cable to a PoE switch or use the included 12V DC power adapter. Ensure your router assigns an IP address via DHCP. You can then access the camera using the FLIR tools or a web browser.
What is the maximum resolution of the FC-690 O?
The camera supports up to 2 MP resolution (1920 x 1080) at 30 fps for sharp video.
Does the FC-690 O have night vision?
Yes, it is equipped with infrared LEDs providing night vision up to 30 meters in complete darkness.
Is the camera weatherproof?
Yes, the FC-690 O has an IP66 rating, making it suitable for outdoor use in rain, snow, and dust.
Can I mount the camera on a wall or ceiling?
Yes, the camera comes with a mounting bracket for wall or ceiling installation. Use the included screws and anchors for a secure fit.
What video compression formats are supported?
The camera supports H.264 and MJPEG compression, allowing efficient storage and streaming.
Does the camera support motion detection?
Yes, it features configurable motion detection zones. Alerts can be sent via email or FTP when motion is triggered.
How do I reset the camera to factory settings?
Press and hold the reset button on the camera for 10 seconds while power is connected. The camera will reboot with default settings.
Is the FC-690 O ONVIF compatible?
Yes, it is ONVIF Profile S compliant, allowing integration with many third-party VMS systems.
What is the power consumption of the camera?
The camera consumes approximately 5W when powered via PoE or 12V DC.
User questions about FC-690 O FLIR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FC-690 O - FLIR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FC-690 O by FLIR.