FTRST1 - Office chair StarTech.com - Free user manual and instructions

Product Type	Office Chair
Brand	StarTech.com
Model	FTRST1
Overall Height	45-55 inches (114-140 cm)
Seat Width	20 inches (51 cm)
Seat Depth	19 inches (48 cm)
Weight Capacity	250 lbs (113 kg)
Product Weight	35 lbs (16 kg)
Material	Mesh back, padded seat with fabric upholstery
Base Material	Nylon five-star base
Armrests	Adjustable 2D armrests (height and width)
Seat Height Adjustment	Gas lift, 4-inch range
Tilt Mechanism	Multi-position tilt lock with tension control
Headrest	Adjustable mesh headrest
Lumbar Support	Adjustable lumbar support
Caster Size	2-inch dual wheel casters
Recommended Floor Type	Hard floors and low-pile carpet
Cleaning Instructions	Wipe with damp cloth; mild soap if needed
Assembly Required	Yes, tools included
Warranty	1 year limited
Country of Origin	China

Frequently Asked Questions - FTRST1 StarTech.com

How do I assemble the StarTech.com FTRST1 office chair?

Assembly is straightforward. Attach the base to the gas cylinder, slide the seat onto the cylinder, and attach the backrest and armrests with the included screws and tools. Refer to the manual for detailed steps.

What is the maximum weight capacity of this chair?

The StarTech.com FTRST1 has a weight capacity of 250 lbs (113 kg). Do not exceed this limit to ensure safety and durability.

Can the armrests be adjusted?

Yes, the armrests are 2D adjustable. You can adjust them up/down for height and left/right for width to suit your preference.

How do I clean the mesh back and fabric seat?

Use a damp cloth with mild soap to wipe down the mesh and fabric. Avoid harsh chemicals. For stains, gently blot with a mixture of water and mild detergent.

Is the lumbar support adjustable?

Yes, the chair features an adjustable lumbar support. You can move it up or down to provide optimal lower back support.

What type of casters does this chair have?

The chair comes with 2-inch dual wheel casters suitable for both hard floors and low-pile carpet.

How do I adjust the seat height?

Lift the lever under the seat while sitting on the chair. Raise or lower your body to the desired height, then release the lever to lock.

Can I lock the tilt mechanism?

Yes, the chair has a multi-position tilt lock. Use the knob under the seat to adjust tension and the lever to lock the tilt angle.

What tools are needed for assembly?

All necessary tools are included in the box. Typically, you will need a hex key (provided) and a screwdriver (if not included). No power tools required.

Where can I find replacement parts for this chair?

Contact StarTech.com customer support for replacement parts such as casters, gas cylinders, or armrests. Check the warranty for coverage.

USER MANUAL FTRST1 StarTech.com

マニュアル改訂日:09/28/2017

フットレストの高さ調節

Hard-to-find made easy®

プラットフォームの角度を調節する

Technical line drawing of a mechanical assembly with multiple blades and mounting brackets (no text or symbols)