Vilma - Lighting Paulmann - Free user manual and instructions

Product Type	Ceiling Light
Model	Vilma
Brand	Paulmann
Dimensions (H x W x D)	120 mm x 400 mm x 400 mm
Weight	1.2 kg
Light Source	LED, integrated
Power Consumption	24 W
Luminous Flux	2000 lm
Color Temperature	3000 K (warm white)
Color Rendering Index (CRI)	≥80
Input Voltage	220-240 V, 50/60 Hz
Protection Class	Class II
IP Rating	IP20 (indoor use only)
Dimmable	Yes, with compatible phase-cut dimmer
Mounting Type	Ceiling mount
Material	Aluminum and polycarbonate
Color	White, matte
Lifespan	30000 hours
Operating Temperature	-20°C to +40°C
Included Accessories	Mounting bracket, screws, dowels
Maintenance	Wipe with a dry cloth; do not use abrasive cleaners
Safety Instructions	Installation only by qualified electrician. Disconnect power before servicing.
Spare Parts	LED module not replaceable; entire fixture replacement recommended
Warranty	5 years (manufacturer warranty)
Certifications	CE, RoHS

Frequently Asked Questions - Vilma Paulmann

What is the light output of the Paulmann Vilma ceiling light?

The Vilma provides a luminous flux of 2000 lumens with a warm white color temperature of 3000K, suitable for ambient lighting.

Can the Vilma be dimmed?

Yes, the light is dimmable when used with a phase-cut dimmer (trailing edge recommended). Ensure compatibility before installation.

Is the Paulmann Vilma suitable for bathrooms?

No, this fixture has an IP rating of IP20, meaning it is not protected against moisture. It should only be used in dry indoor areas.

What tools are needed for installation?

You will need a screwdriver, drill (if mounting to concrete), voltage tester, and possibly a wire stripper. Follow the included manual.

Can I replace the LED module in the Vilma?

The LED module is integrated and non-replaceable. If the LED fails, the entire fixture must be replaced. Refer to warranty conditions.

What is the maximum ceiling slope for mounting?

The fixture is designed for flat ceilings. For sloped ceilings, an adapter may be needed but not included. Contact Paulmann for advice.

How do I clean the Vilma light fixture?

Disconnect power and allow the light to cool. Wipe with a soft, dry cloth. Do not use water, solvents, or abrasive materials.

What is the weight of the Paulmann Vilma?

The fixture weighs approximately 1.2 kg. Ensure the ceiling mounting can support this weight.

Does the Vilma come with a remote control?

No, the light is operated via a wall switch. It does not include a remote or smart control.

What is the expected lifespan of the LED?

The LED has a rated lifespan of 30,000 hours, equivalent to about 10 years of typical use (8 hours per day).

USER MANUAL Vilma Paulmann