PSB-510P - Pregnant DAP-Audio - Free user manual and instructions
Find the device manual for free PSB-510P DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive PA Speaker |
| Model | PSB-510P |
| Brand | DAP-Audio |
| Power Handling (RMS) | 500 W |
| Power Handling (Peak) | 1000 W |
| Impedance | 8 ohms |
| Frequency Response | 50 Hz - 20 kHz |
| Sensitivity | 95 dB (1W/1m) |
| Woofer Size | 10 inches |
| Tweeter Size | 1 inch |
| Cabinet Material | Plywood with black coating |
| Dimensions (W x H x D) | 330 x 520 x 300 mm |
| Weight | 15 kg |
| Connectors | 2 x SpeakON NL4 |
| Mounting Options | Pole mount (35 mm), flying points |
| Grille | Perforated steel |
| Application | Portable PA, live sound, DJ |
| Maintenance | Wipe with a soft, dry cloth; avoid solvents |
| Safety Precautions | Keep away from moisture; do not overload; use with compatible amplifier |
| Spare Parts & Repairability | Contact DAP-Audio support for replacement drivers or components |
| Included Accessories | None (speaker only) |
Frequently Asked Questions - PSB-510P DAP-Audio
How do I connect the PSB-510P speaker to an amplifier?
Use a SpeakON NL4 cable to connect the amplifier output to the speaker input. Ensure the amplifier is turned off when making connections. The speaker is passive, so it requires an external amplifier.
What is the power handling of the PSB-510P?
The RMS power handling is 500 watts, with a peak capacity of 1000 watts. Always match the amplifier output to the speaker's RMS rating for optimal performance.
What impedance does the PSB-510P have?
The nominal impedance is 8 ohms. This allows multiple speakers to be connected in parallel to a single amplifier, provided the total impedance does not drop below the amplifier's minimum rating.
Can the PSB-510P be used with a subwoofer?
Yes, the PSB-510P is a full-range speaker but can be complemented with a subwoofer for extended low-frequency response. Use an active crossover or a subwoofer with built-in crossover.
How should I mount the PSB-510P?
The speaker has a 35 mm pole mount socket for stand mounting. It also features flying points for suspended installation using appropriate rigging hardware. Always follow safety guidelines.
What type of amplifier is recommended for the PSB-510P?
Use an amplifier that delivers between 500W and 1000W into 8 ohms per channel. Avoid clipping and ensure the amplifier is stable at the speaker's impedance.
How do I clean the PSB-510P speaker?
Wipe the cabinet with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth with mild soap. Do not use solvents or abrasive cleaners. Keep the grille clean to avoid sound degradation.
Can the PSB-510P be used outdoors?
The speaker is designed for indoor use but can be used outdoors under a cover if protected from direct rain and moisture. Prolonged exposure to humidity may damage components.
What is the warranty period for the PSB-510P?
DAP-Audio typically offers a 2-year warranty against manufacturing defects. Keep your proof of purchase. For warranty claims, contact your dealer or DAP-Audio support.
Why is there no sound coming from the speaker?
Check connections: ensure the SpeakON cable is fully inserted and the amplifier is on. Verify the amplifier is not muted and the source signal is present. Test with another speaker or cable to isolate the issue.
User questions about PSB-510P DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual PSB-510P - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PSB-510P by DAP-Audio.