UR-104AN - Router Upvel - Free user manual and instructions
Find the device manual for free UR-104AN Upvel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Model | UR-104AN |
| Brand | Upvel |
| Dimensions (approximate) | 150 x 100 x 30 mm |
| Weight | 200 g |
| Power Supply | 5V DC, 1A (via USB or power adapter) |
| Number of LAN Ports | 4 (10/100 Mbps) |
| Number of WAN Ports | 1 (10/100 Mbps) |
| Wireless Standard | IEEE 802.11b/g/n (2.4 GHz) |
| Maximum Wireless Speed | 300 Mbps |
| Security | WPA2-PSK, WPA-PSK, WEP |
| Firewall | SPI firewall, NAT |
| Antenna Type | 2 external antennas (fixed) |
| LED Indicators | Power, WAN, LAN 1-4, WLAN |
| Reset Button | Yes (press and hold 10 seconds) |
| Default IP Address | 192.168.1.1 |
| Default Username / Password | admin / admin |
| Supported Standards | IEEE 802.3, 802.3u |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a dry, soft cloth. Avoid liquids. |
| Spare Parts / Repairability | Not user-serviceable. Contact support for issues. |
Frequently Asked Questions - UR-104AN Upvel
How to set up the Upvel UR-104AN router?
Connect the router to your modem via the WAN port, then connect a computer to any LAN port. Power on the router. Open a browser and go to 192.168.1.1. Log in with default credentials (admin/admin). Follow the setup wizard.
What is the default IP address of the UR-104AN?
The default IP is 192.168.1.1. You can also access it via the hostname 'upvel' if your network supports it.
How to reset the Upvel UR-104AN to factory settings?
Press and hold the Reset button on the back of the router for about 10 seconds until the power LED flashes. Release the button; the router will reboot with factory defaults.
How to change the Wi-Fi password on the UR-104AN?
Log into the router's web interface (192.168.1.1). Go to Wireless settings, find Security, and set a new passphrase. Save the settings. The router may reboot.
Does the UR-104AN support 5 GHz Wi-Fi?
No, it only supports 2.4 GHz (802.11b/g/n). For 5 GHz, consider a dual-band model.
How to update the firmware on the Upvel UR-104AN?
Check the Upvel support website for firmware updates for the UR-104AN. Download the file, log into the router, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
Why is my internet not working after setup?
Verify that the WAN cable is connected to your modem. Check if your internet service requires PPPoE credentials. Go to Network > WAN and select the correct connection type. Also, try restarting both modem and router.
How to enable port forwarding on the UR-104AN?
Log into the router, go to Advanced > Virtual Server or Port Forwarding. Add a new entry with the service port, IP address of the device, and protocol. Save and apply.
Can the UR-104AN be used as a repeater?
The standard firmware does not include a repeater mode. You may try third-party firmware if supported, but it is not officially recommended.
What do the LED indicators mean on the UR-104AN?
Power: solid if on. WAN: solid when connected to internet, blinking with activity. LAN 1-4: solid when device connected, blinking with traffic. WLAN: solid when Wi-Fi is on.
User questions about UR-104AN Upvel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual UR-104AN - Upvel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UR-104AN by Upvel.