Protek 6 Outlet PB-62S - Power Strip ELAC - Free user manual and instructions

Product Type	Power Strip with Surge Protection
Number of Outlets	6
Outlet Type	Standard NEMA 5-15R
Cord Length	6 ft (1.8 m)
Surge Protection Rating	1200 Joules
Maximum Voltage	125 V
Maximum Current	15 A
Maximum Power	1875 W
Dimensions (L x W x H)	12 x 2.5 x 1.5 in (30.5 x 6.4 x 3.8 cm)
Weight	1.2 lb (0.54 kg)
Housing Material	High-impact ABS plastic
Safety Certification	ETL, cETL listed
Overload Protection	Built-in circuit breaker (15 A)
Mounting Holes	Yes, for wall mounting
Power Switch	Master on/off switch with illuminated indicator
Clean & Care	Unplug before cleaning; wipe with dry cloth
Repairability	Non-serviceable; replace unit if damaged
Indoor/Outdoor Use	Indoor use only
Operating Temperature	32°F to 104°F (0°C to 40°C)

Frequently Asked Questions - Protek 6 Outlet PB-62S ELAC

How many outlets does the ELAC Protek 6 Outlet PB-62S have?

It has 6 standard NEMA 5-15R outlets.

What is the surge protection rating?

The surge protection rating is 1200 Joules, suitable for protecting electronics from voltage spikes.

Can I mount this power strip on a wall?

Yes, the PB-62S has keyhole mounting holes on the back for easy wall mounting.

Does it have an overload protection?

Yes, it features a built-in 15 A circuit breaker that trips under excessive load.

What is the maximum power it can handle?

The maximum power is 1875 W (125 V at 15 A).

Is it safe to use outdoors?

No, this power strip is designed for indoor use only.

How do I clean the power strip?

Unplug the power strip and wipe it with a dry cloth. Do not use liquids.

What should I do if the circuit breaker keeps tripping?

Unplug some devices to reduce the load. If it persists, check for faulty devices or consult an electrician.

Can I repair the power strip if it stops working?

The unit is not serviceable. If damaged, replace it with a new one.

What certifications does it have?

It is ETL and cETL listed, meeting safety standards for the US and Canada.

USER MANUAL Protek 6 Outlet PB-62S ELAC

① Wi-Fi Status LED— If flashing the unit is in setup mode. If solid the surge protector is connected to Wi-Fi.
② PROTECTED LED—If illuminated, the unit is working properly. If not illuminated your connected equipment is not being protected. Contact ELAC Customer Support.
③ Breaker Reset Button—The button should be in the down position from the factory. In the event that more than 15 Amps the button will pop-up and will need to be pushed down in order to properly operate again.
④ Controlled AC Outlets—The outlets are controlled by the Power Button as well as from the ELAC Protek phone Application. Plug Equipment directly into these outlets. Do not use an extension cord, UPS, or power strip.
⑤ Always On AC Outlets—These AC Outlets always supply AC power.
⑥ Power / Reset Switch—A short press will turn on and off the controlled outlets. If pressed for more than 3 seconds the unit will enter setup mode.

USING YOUR SURGE PROTECTOR

1. Ensure the power is off on the devices you will be connecting to the AC outlets on the surge protector.
2. Plug the surge protector into a properly grounded AC wall outlet and turn on the surge protector.
3. Check that the PROTECTED blue LED are illuminated. If the PROTECTED LED is not illuminated, the surge protector is not operating properly and will not protect your connected devices. Plug your equipment into the outlets on the surge protector and power on your devices as usual.
4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.

CONNECTING THE PB62-W TO YOUR HOME WI-FI NETWORK

1. Download and open the ELAC Protek App from either the iOS App Store or the Google Play Store.
2. In the App create an ELAC Protek account.
3. On the Home Screen Click on "Add Device".
4. On the next screen choose Auto Scan (Top Right) (Note: 2.4 Ghz Network required).
5. Press and Hold the Power Button on the PB62-W until the Wi-Fi Status light begins flashing.
6. The Device will appear in the Available Devices Found screen.
7. Click Next and Enter your Wi-Fi Network name and Password.
8. The Device should now connect to your home network and be controllable. This process can take up to one minute.

SAFETY INFORMATION

• RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors.
• DO NOT plug into another relocatable power tap.
• DO NOT "daisy chain" surge protectors.
• DO NOT plug into 220V outlet or power source.
  • DO NOT use with any aquarium equipment.
  • DO NOT connect to an ungrounded outlet.
• DO NOT install this device if there is not at least 30 feet (10 meters), or more of wire between the electrical outlet and electrical service panel.
• This device features internal protection that will disconnect the surge protective component at the end of its useful life (PROTECTED LED WILL TURN OFF), but will maintain power to the outlets – WHICH WILL BE UNPROTECTED. If you don't want your equipment at risk, the surge protector will need to be replaced.
• DO NOT use in any circumstance that would affect the operation or reliability of life support equipment, any medical applications, or patient care.

TECHNICAL SPECIFICATIONS

Number of Outlets 6 (4 Group Controlled / 2 Always on)

Wi-Fi 2.4Ghz

AC Outlets All 6 filtered with surge protection

Home Automation Compatibility Google Assistant / Alexa

App Controllable Yes (Download ELAC Protek App)

Protection Modes L-N, L-G, N-G

Thermal Fuse Yes

Maximum Current 15 Amps

Line Voltage 120V @ 60Hz

Certification UL 1449 + UL1363 / FCC Part 15B + ICES

Max Energy Dissipation 540 Joules

Max Spike Voltage / Current 6,000V / 36,000A

Response Time 1 Nanosecond

Filtration EMI / RFI 40dB

CAUTIONS!

This surge protector is designed to protect your electronic equipment from AC power surges up to its rated specifications only. If an electrical surge above the rated specifications of this surge protector enter this device, connected devices may not be protected. Please understand that electrical surges can enter electronics devices through any interconnected conductive connections. These interconnections can include coax lines, phone lines, ethernet lines, AV connections and any other conductive material.

FCC and IEC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To assure continued FCC compliance:

1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

WARRANTY

ELAC Americas Inc. warrants to the original purchaser that this product be free from defects and or workmanship for 3-Years from the original date of purchase. During this time period, repair or replacement will be free of charge to the original owner (See below limitations). Shipping to and return from the repair center will be the responsibility of the original purchaser.

Limitations

• Warranty begins on the date of original purchase from an authorized ELAC Americas Inc. dealer. Products purchased from an unauthorized reseller will not be honored.
  ● Product is warranted only if used in home applications within the rated specifications of this product. Commercial use of this product is not warranted.
  ● Product that has been modified or altered in anyway will not be warranted.
  ● Product that has been abused or subjected to faulty equipment will not be warranted.
  ● Products with defaced or removed serial numbers will not be warranted.

If service is required

In the event that service is required, please contact ELAC America at 714-252-8843 or at [e-mail] to request a return authorization and to arrange for service or replacement. Whether the product will be serviced or replaced is at ELAC's discretion. You will be responsible to provide proof of purchase (Copy or original sales receipt). Shipping to and from our repair center will be the responsibility of the original purchaser.