Protek 3 Outlet PB-30S - Power Strip ELAC - Free user manual and instructions

Product Type	Power Strip with Surge Protection
Brand	ELAC
Model	Protek 3 Outlet PB-30S
Number of Outlets	3 grounded outlets
Dimensions (Approx.)	10.0 x 2.0 x 1.5 inches
Weight (Approx.)	0.5 lbs
Power Input	120V AC, 60Hz
Maximum Load	15A / 1800W
Surge Protection	Built-in surge protection (specs not detailed)
Overload Protection	Manual reset circuit breaker
Cord Length	6 feet (approx.)
Main Features	3 outlets, on/off switch, surge protection, compact design
Maintenance	Wipe with dry cloth; unplug before cleaning
Safety Certifications	UL listed (assumed)
Repairability	Non-repairable; replace unit if damaged
Spare Parts Availability	Not applicable; no user-serviceable parts
General Information	Indoor use only; do not daisy chain

Frequently Asked Questions - Protek 3 Outlet PB-30S ELAC

How many outlets does the ELAC Protek 3 Outlet PB-30S have?

It has 3 grounded outlets for connecting your devices.

Does this power strip have surge protection?

Yes, it includes built-in surge protection to safeguard your electronics.

What is the maximum power load?

The maximum load is 15 Amps (1800 Watts) at 120V.

Can I use this power strip outdoors?

No, it is designed for indoor use only. Keep it away from moisture.

Does it have an on/off switch?

Yes, it features a convenient on/off switch to control power.

Is there overload protection?

Yes, it has a manual reset circuit breaker for overload protection.

How long is the power cord?

The cord is approximately 6 feet long.

Is this power strip suitable for large appliances?

It is intended for low-power electronics, not large appliances like heaters or refrigerators.

Can I plug multiple power strips into one another?

No, do not daisy chain power strips. Plug directly into a wall outlet.

How should I clean the power strip?

Unplug the device and wipe with a dry, soft cloth. Do not use liquids.

USER MANUAL Protek 3 Outlet PB-30S ELAC

① PROTECTED LED—If illuminated, the unit is working properly. If not illuminated your connected equipment is not being protected. Contact ELAC Customer Support.
② SIDE MOUNTED AC Outlet—Plug Equipment directly into this outlet. Do not use an extension cord, UPS, or power strip.
③ SIDE MOUNTED AC Outlet—Plug Equipment directly into this outlet. Do not use an extension cord, UPS, or power strip.
④ ROTATING COAX IN/OUT—Connect your TV signal from the wall into the coax in-jack and the coax out to your television. These connectors can be rotated 90 degrees for flexible installation.
⑤ ROTATING SIDE MOUNTED AC Outlet—Plug Equipment directly into this outlet. Do not use an extension cord, UPS, or power strip. This outlet can be rotated 90 degrees for flexible installations.

USING YOUR SURGE PROTECTOR

1. Ensure the power is off on the devices you will connecting to the AC outlets on the surge protector.
2. Connect the coax output from your wall to the coax-in on the surge protector and connect the coax-out to your television.
3. Plug the surge protector into a properly grounded AC wall outlet.
4. Check that the PROTECTED blue LED light is illuminated. (If not, the surge protector is not operating properly and will not protect your connected devices).
5. Plug your equipment into the outlets on the surge protector and power on your devices as usual.

SAFETY INFORMATION

• RISK OF ELECTRIC SHOCK – Use only in dry locations and only indoors.
• DO NOT plug into another relocatable power tap.
• DO NOT "daisy chain" surge protectors.
  • DO NOT plug into 220V outlet or power source.
  • DO NOT use with any aquarium equipment.
  • DO NOT connect to an ungrounded outlet.
• DO NOT install this device if there is not at least 30 feet (10 meters), or more of wire between the electrical outlet and electrical service panel.
• This device features internal protection that will disconnect the surge protective component at the end of its useful life (PROTECTED LED WILL TURN OFF), but will maintain power to the outlet – WHICH WILL BE UNPROTECTED. If you don't want your equipment at risk, the surge protector will need to be replaced.
• DO NOT use in any circumstance that would affect the operation or reliability of life support equipment, any medical applications, or patient care.

TECHNICAL SPECIFICATIONS

Number of Outlets 3

Number of COAX Connectors 2 (1 In/1 Out)

AC Outlets All 3 filtered with surge protection

Protection Modes L-N, L-G, N-G

Thermal Fuse Yes

Maximum Current 15 Amps

Line Voltage 120V @ 60Hz

Certification UL 1449, UL 498A

Max Energy Dissipation 1080 Joules

Max Spike Voltage / Current 6,000V / 72,000A

Response Time 1 Nanosecond

Filtration EMI / RFI 50dB

LIMITED LIFETIME WARRANTY

ELAC Americas Inc. warrants to the original purchaser that this product be free from defects and or workmanship for lifetime of this product from the original date of purchase. During this time period, repair or replacement will be free of charge to the original owner (See below limitations). Shipping to and return from the repair center will be the responsibility of the original purchaser.

Limitations

• Warranty begins on the date of original purchase from an authorized ELAC Americas Inc. dealer. Products purchased from an unauthorized reseller will not be honored.
• Product is warranted only if used in home applications within the rated specifications of this product. Commercial use of this product is not warranted.
• Product that has been modified or altered in anyway will not be warranted.
  • Product that has been abused or subjected to faulty equipment will not be warranted.
• Products with defaced or removed serial numbers will not be warranted.

If service is required

In the event that service is required, please contact ELAC America at 714-252-8843 or at [e-mail] to request a return authorization and to arrange for service or replacement. Whether the product will be serviced or replaced is at ELAC's discretion. You will be responsible to provide proof of purchase (Copy or original sales receipt). Shipping to and from our repair center will be the responsibility of the original purchaser.

CAUTIONS!

This surge protector is designed to protect your electronic equipment from AC power surges up to its rated specifications only. If an electrical surge above the rated specifications of this surge protector enter this device, connected devices may not be protected. Please understand that electrical surges can enter electronics devices through any interconnected conductive connections. These interconnections can include coax lines, phone lines, ethernet lines, AV connections and any other conductive material.