FirePro MXRT-5450 - Graphic card Barco - Free user manual and instructions
Find the device manual for free FirePro MXRT-5450 Barco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Graphics Card |
| Brand | Barco |
| Model | FirePro MXRT-5450 |
| Category | Medical Display Controller |
| Interface | PCI Express 2.0 x16 |
| Memory | 512 MB GDDR3 |
| Memory Bandwidth | 25.6 GB/s |
| Outputs | 2x DVI-D, 2x DisplayPort |
| Maximum Resolution | 2560 x 1600 per output |
| Color Depth | 10-bit per channel |
| Power Consumption | 75 W |
| Cooling | Passive Heatsink (Fanless) |
| Form Factor | Low Profile, Single Slot |
| Dimensions (L x H) | 169 mm x 68 mm |
| Weight | 200 g |
| Operating Temperature | 0°C to 40°C |
| Certifications | CE, FCC, DICOM Part 14 |
| Warranty | 3 Years |
| Included Accessories | Quick Start Guide, Driver CD, Low Profile Bracket |
| Features | DICOM Calibration, Gamma Correction, LUT Support |
Frequently Asked Questions - FirePro MXRT-5450 Barco
How do I install the Barco FirePro MXRT-5450?
Insert the card into an available PCI Express x16 slot on your motherboard. Ensure the card is fully seated and secure it with the screw. Connect the appropriate power cable if required (though the card typically draws power from the PCIe slot). Install the drivers from the included CD or download the latest from Barco's website.
What drivers are compatible with the MXRT-5450?
The MXRT-5450 uses Barco's MedDisplay driver package, which supports Windows 7, 8, and 10 (64-bit). For Linux, Barco provides specific driver packages. Always use the latest version from the Barco support site for optimal performance and DICOM calibration.
Can I use this graphics card for gaming?
The MXRT-5450 is designed for medical imaging, not gaming. Its performance in 3D applications is limited. It excels at displaying high-resolution grayscale images with 10-bit color depth and precise luminance, but lacks the power for modern games.
How to clean the MXRT-5450?
Power off the system and unplug the card. Use compressed air to blow dust from the heatsink and PCB. Avoid using liquids or abrasive materials. For stubborn dirt, gently wipe with a lint-free cloth slightly dampened with isopropyl alcohol. Ensure the card is completely dry before reinstalling.
What is the maximum supported display resolution?
Each output supports up to 2560 x 1600 @ 60Hz. For dual-link DVI monitors, you can achieve 3840 x 2400 at 30Hz, but for standard medical monitors, 2560 x 1600 is typical. The card supports multiple monitors simultaneously.
Does the MXRT-5450 support DICOM calibration?
Yes, it includes hardware LUTs (Look-Up Tables) for DICOM Part 14 Calibration. Barco's MedCal QAWeb software allows you to set and verify grayscale standards, ensuring consistent image display across monitors.
Why is my card not detected after installation?
Ensure the card is firmly seated in the PCIe slot. Check that the system's BIOS is set to use the external graphics card. If using multiple cards, verify the primary display is set correctly. Try reseating the card or testing in another PCIe slot.
What is the power supply requirement?
The MXRT-5450 draws up to 75W from the PCIe slot. A 300W or higher power supply is recommended. No additional power connector is needed. For systems with multiple high-power components, a 400W+ PSU is advisable.
Can I use this card with standard desktop monitors?
Yes, it works with standard monitors via DVI or DisplayPort connections. However, its 10-bit color and calibration features are best utilized with medical-grade displays that support DICOM profiles.
How to update the firmware on the MXRT-5450?
Download the latest firmware from Barco's support website. Run the updater utility in Windows with administrator privileges. Follow on-screen instructions. Do not power off the system during the update. The card's firmware improves compatibility and DICOM compliance.
User questions about FirePro MXRT-5450 Barco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Graphic card in PDF format for free! Find your manual FirePro MXRT-5450 - Barco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FirePro MXRT-5450 by Barco.