8010DSPCAD - Compressor California Air Tools - Free user manual and instructions
Find the device manual for free 8010DSPCAD California Air Tools in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Compressor |
| Brand | California Air Tools |
| Model | 8010DSPCAD |
| Tank Capacity | 8 Gallons |
| Horsepower | 1.0 HP |
| Voltage | 120V, 60Hz |
| Phase | Single Phase |
| Max Pressure | 125 PSI |
| Air Flow (CFM at 40 PSI) | 3.0 CFM |
| Air Flow (CFM at 90 PSI) | 2.2 CFM |
| Noise Level | 60 dB(A) |
| Pump Type | Oil-Free, Dual Piston |
| Dimensions (L x W x H) | 18.5 x 14.5 x 17.5 inches |
| Weight | 70 lbs |
| Warranty | 2 Years Limited |
| Maintenance | Drain tank daily, check air filter monthly |
| Safety Features | Thermal overload protection, pressure relief valve |
| Intended Use | Inflating tires, operating nail guns, air tools |
Frequently Asked Questions - 8010DSPCAD California Air Tools
What type of oil does the California Air Tools 8010DSPCAD compressor require?
How do I drain the air tank?
What is the maximum pressure and how do I adjust it?
Why won’t my compressor start?
What is the noise level of this compressor?
Can I use this compressor for painting?
How often should I clean the air filter?
The compressor runs continuously without stopping. What should I do?
What is the tank capacity and how long does it take to fill?
Where can I find replacement parts?
User questions about 8010DSPCAD California Air Tools
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Compressor in PDF format for free! Find your manual 8010DSPCAD - California Air Tools and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8010DSPCAD by California Air Tools.