ANT-9004 - TV Tuner for Computer Steren - Free user manual and instructions

Product Type	TV Tuner for Computer
Brand	Steren
Model	ANT-9004
Interface	USB 2.0
TV Standard	ATSC (Digital) / NTSC (Analog)
Frequency Range	VHF: 54-216 MHz, UHF: 470-890 MHz
Video Format	MPEG-2, H.264 (up to 1080i)
Audio Format	MPEG-1, MPEG-2, Dolby Digital
Antenna Input	75 ohm F-type
Remote Control	Included (IR)
Power Source	USB bus-powered (5V DC)
Dimensions (L x W x H)	3.5 x 1.2 x 0.6 in (89 x 30 x 15 mm)
Weight	1.1 oz (30 g)
Operating System	Windows 10, 8.1, 7 (32/64-bit); Linux (kernel 3.x+)
Software	Includes media center application for live TV and recording
Recording	Schedule and record TV programs to hard drive
Electronic Program Guide (EPG)	Supported (via internet)
Maintenance	Clean with dry, soft cloth. Do not use liquids.
Safety	Keep away from moisture and extreme temperatures. Disconnect when not in use.
Spare Parts	Remote control and antenna available separately from Steren.
Repairability	No user-serviceable parts. Contact authorized service center.
Certification	FCC, RoHS

Frequently Asked Questions - ANT-9004 Steren

How do I install the ANT-9004 TV tuner on my computer?

First, connect the tuner to a USB port. Install the included software from the CD or download the latest driver from Steren's website. Follow the on-screen instructions to set up your channels using the antenna.

Does the ANT-9004 work with Windows 11?

While not officially listed, the ANT-9004 usually works with Windows 11 if you use the Windows 10 drivers in compatibility mode. For best performance, check Steren's support page for updated drivers.

Can I use the ANT-9004 without an internet connection?

Yes, you can watch over-the-air TV without internet. However, the Electronic Program Guide (EPG) requires an internet connection to download schedule data.

What antenna is recommended for the ANT-9004?

The ANT-9004 works with any standard 75-ohm TV antenna. For indoor use, an amplified antenna is recommended for better reception in weak signal areas.

How do I record TV programs with the ANT-9004?

Use the included software or a compatible application (e.g., Kodi). Select the program from the EPG or manual timer, choose record, and the file will be saved to your hard drive in MPEG format.

Why is there no signal detected on the ANT-9004?

Ensure the antenna is properly connected and positioned. Rescan channels in the software. Check that the tuner is recognized in Device Manager. If using an analog signal, confirm your area still broadcasts analog TV.

Can I use the ANT-9004 on a Mac?

The ANT-9004 is designed for Windows. Mac compatibility is not guaranteed. However, some users have reported success with third-party software like EyeTV or using Windows via Boot Camp.

Does the remote control require batteries?

Yes, the included remote uses two AAA batteries (not included). Open the battery compartment on the back and insert the batteries with correct polarity.

What is the maximum resolution for video output?

The ANT-9004 supports up to 1080i (interlaced) resolution for digital TV broadcasts. For analog channels, resolution will be lower (480i).

Is the ANT-9004 compatible with Linux?

Yes, the ANT-9004 uses a standard USB TV tuner chipset (e.g., Afatech or similar). It is supported in Linux kernels 3.x and later with the em28xx or dvb-usb drivers. You may need to install firmware files.

USER MANUAL ANT-9004 Steren

Ensambla (a o b)

Coloca (a o b)

Notas:

STEREN PRODUCTO EMPACADO S.A. DE C.V.

Autopista México-Querétaro, Km 26.5, sin número, Nave Industrial 3-A, col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de México, C.P. 54020, RFC: SPE-941215-H43