ANT-9032 - TV Tuner for Computer Steren - Free user manual and instructions

Product Type	TV Tuner for Computer
Brand	Steren
Model	ANT-9032
Interface	USB 2.0
TV System	NTSC / ATSC
Frequency Range	VHF 54-216 MHz, UHF 470-890 MHz
Antenna Input	75 ohm F-type connector
Video Format	MPEG-2, MPEG-4
Audio Format	AAC, AC3
Maximum Resolution	1920 x 1080 (Full HD)
Power Supply	USB powered (5V DC)
Power Consumption	2.5 W
Dimensions (L x W x H)	80 mm x 25 mm x 12 mm
Weight	30 g
Operating System Compatibility	Windows 10, 8, 7; macOS 10.12+; Linux Kernel 3.0+
Software Included	Windows Media Center, TotalMedia (trial)
Main Functions	Watch and record live TV, time-shifting, electronic program guide
Recording Format	.ts, .mp4
Maintenance & Cleaning	Keep dry; clean with soft cloth; avoid solvents
Safety	For indoor use only; operate within 0-40°C
Spare Parts & Repairability	Not user-serviceable; contact Steren support
Package Contents	TV Tuner, remote control, USB extension cable, antenna splitter, quick start guide
General Information	Compact USB TV tuner for desktop/laptop; allows digital TV reception on PC

Frequently Asked Questions - ANT-9032 Steren

How do I install the ANT-9032 TV tuner on my computer?

Connect the device to a USB port. Install the included drivers from the CD or download the latest from Steren's website. Then plug in an antenna and run the TV software to scan for channels.

Is the ANT-9032 compatible with Mac or Linux?

Yes, it works with macOS 10.12+ and Linux Kernel 3.0+ using compatible TV software like VLC or Kaffeine. Drivers may need manual installation on Linux.

What antenna do I need?

A standard 75 ohm coaxial over-the-air antenna is required. For best reception, use an outdoor or amplified indoor antenna.

Can I record TV shows?

Yes, the included software allows recording live TV to your hard drive in .ts or .mp4 format. You can also schedule recordings via the electronic program guide.

What TV standards does the device support?

It supports NTSC and ATSC (digital) for North America. For other regions, check the model variant. It receives VHF and UHF bands.

Why is the picture pixelated or no signal?

Check antenna connection and placement. Try rescanning channels in the software. Ensure you are in an area with good broadcast coverage. Use a signal amplifier if needed.

Does it work with Windows Media Center?

Yes, Windows Media Center is supported. Install the drivers and configure the tuner within WMC. However, WMC is only available on Windows 7 and 8.

Can I use this tuner without an internet connection?

Absolutely. The tuner receives over-the-air broadcast signals and does not require internet. However, software updates and EPG data may need internet.

How do I clean the tuner?

Disconnect the device. Use a soft, dry cloth to wipe the exterior. Avoid liquids, solvents, or abrasive cleaners. Keep away from moisture.

What is the warranty period?

Steren provides a 1-year limited warranty against manufacturing defects. Retain your purchase receipt. Warranty does not cover misuse or damage.

USER MANUAL ANT-9032 Steren

Diagram showing connections between a device and an electrical outlet, with no visible text or symbols.

STEREN PRODUCTO EMPACADO S.A. DE C.V.

Autopista México-Querétaro, Km 26.5, sin número, Nave Industrial 3-A, col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de México, C.P. 54020, RFC: SPE-941215-H43