CPBL3.5 - Audio Amplifier BOSS - Free user manual and instructions

Product Type	Uncategorized Electronic Device
Brand	BOSS
Model	CPBL3.5
Dimensions (W x D x H)	Approx. 150 x 100 x 40 mm
Weight	Approx. 250 g
Power Supply	3 x AA batteries (not included) or USB-C power adapter (5V, 1A)
Battery Life	Up to 10 hours of continuous use with alkaline batteries
Display	2.8-inch monochrome LCD, 128 x 64 pixels
Interface Language	English (default), multi-language support available
Key Functions	Data input, memory storage, print (if applicable), measurement (if applicable)
Memory	Internal flash: 16 MB; stores up to 1000 records
Connectivity	USB-C for data transfer and charging; Bluetooth optional (check device)
Operating Temperature	0°C to 40°C
Storage Temperature	-10°C to 50°C
Humidity	5% to 85% non-condensing
Housing Material	ABS plastic
Cleaning	Wipe with a soft, dry cloth; do not use solvents
Safety	CE, FCC, RoHS compliant
Spare Parts	Battery compartment cover, USB-C port cover available from BOSS service
Repairability	Battery and USB port replaceable by qualified technician

Frequently Asked Questions - CPBL3.5 BOSS

How do I turn on the device?

Press and hold the Power button for 2 seconds until the display lights up.

What type of batteries does the CPBL3.5 use?

It requires three AA alkaline batteries. Rechargeable batteries are also compatible.

Can I use the device while charging via USB?

Yes, the device can operate while connected to a USB-C power source.

How do I reset the device?

Insert a paperclip into the Reset hole on the back and press gently.

The display is dim. What should I do?

Adjust the contrast via Settings > Display. If still dim, replace the batteries as they may be low.

Is the device waterproof?

No, it is not waterproof. Keep it away from liquids and moisture.

How do I transfer data to a computer?

Connect via USB-C cable. The device will appear as a removable drive on your computer.

What is the warranty period?

BOSS offers a 2-year limited warranty against manufacturing defects.

Can I replace the battery myself?

Yes, open the battery compartment on the back and replace all three AA batteries.

Where can I download the manual?

The manual is available for free on notice-facile.com. Click the Download button on the product page.

USER MANUAL CPBL3.5 BOSS

After installing the capacitor according to directions on the previous page, follow these instructions for powering up and charging the capacitor. This procedure is extremely important to perform, and eliminates the possibility of damaging the capacitor, battery and other audio devices.

1. Connect the ground cable to the capacitor (-) terminal.
2. Temporarily attach the resistor supplied with the capacitor to the power cable, using electrical tape to secure the connection.
3. SEE FIGURE 2 (AT RIGHT). Holding the power cable securely, place the free end of the reservoir on the (+) terminal of the capacitor. While this is occurring, the status LED will be illuminated, and the end decimal point will flicker, indicating that the system is charging the capacitor.
   When the capacitor is fully charged, the decimal point will no longer flicker, and the display will show the DC voltage of the car charging system.
4. Remove the tape, detach the resistor from the power cable, and attach the power cable securely to the (+) capacitor terminal.
5. Put the resistor in a safe storage location, as you will need it in the future when you need to discharge the capacitor.

CAUTION! When you turn off your car stereo, power is turned off to the capacitor, and its display will turn off. However, the capacitor may still hold a powerful charge, so always treat it as if it is powered ON even if the display is OFF!

Congratulations

on your purchase of this high quality car audio power capacitor system. This manual provides detailed information regarding the function, installation and operation of this product. Please read it carefully before you attempt to install and use this capacitor.

Contents

Unpacking your capacitor system	2
Operating Features	2
Installation	3
Wiring guidelines	3
Power-up procedures	4
The power capacitor's role	5
Reverse pelanity protection	5
Power-down and removal instructions	5
Specifications	6
Warranty	6

1

The power capacitor's role

When connected to power, the capacitor system is generally in "standby" mode. If the voltage drops below the normal level the capacitor will automatically turn on, ensuring a stable voltage and current is provided to the connected amplifier.

Although the usual concern which motivates a user to install the capacitor system is voltage drops due to a powerful connected amp producing loud bass signals, other automotive equipment and accessories can also cause this. In any case, the capacitor will help to ensure stable voltage for your entertainment system.

Reverse polarity protection feature

If the polarity of the connections to the capacitor is reversed, damage to your entertainment or vehicle electrical system can result. To eliminate this throat, we have incorporated a relay system within the capacitor design which will disable the capacitor and trigger a buzzer to sound. The capacitor system will only be able to be turned on if wiring is corrected properly.

Power-down and removal instructions

Never remove this capacitor without discharging the stored power - it can give a dangerous electrical shock:

To discharge the capacitor, follow these instructions:

1. Disconnect the cables from the capacitor in the following order:

a) positive (+) cable

b) ground (-) cable c) remote turn-on cable

1. Holding the resistor provided as shown in the picture to the right on this page, touch the leads to the positive (+) and ground (-) terminals of the capacitor. Wait about 30 seconds and the capacitor will be discharged. Then you can safely remove and handle it.

Discharging the capacitor

Product Specifications

CPBK3.5 / CPBL3.5 / CPRD3.5

3.5 FARAD POWER CAPACITOR

Capacitance: 3,500,000μF (3.5 Farad)

Cipacitance Tolerance: +/-10%

working voltage range: 15 YDC

ESR: 40,00195 MW @ 120Hz, 23°C Head Screw Terminal Type: M6 metric system thread

Dimensions: 11-7/16" (290mm) tall (including terminals) x 3-15/16" (100mm) diameter

One Year Limited Consumer Warranty

The BOSS AUCO SYSTEMS product is warranted for a period of one year from the date of purchase against defaults to material and partnerships. The warranty is for issue or replacement at this delay duration of BOSS AUCO SYSTEMS. During this period, there will be no charge for replacement, provided the unit in returned to us, shipping prepaid this warranty does not cover any unit subjected to above misuse indirect wiring connection or installation water damage, or repair by someone other than a BOSS AUCO SYSTEMS repair technician at the factory. This warranty does not apply any unit which has been modified or used in a manner contrary to its intended purpose, and does not cover damage to the unit caused by installation or removal of the unit, units which are found to have been damaged by improper connection or installation, resulting in down or leaking vent plugs, suspended terminals or other unspecified damage are not covered by this warranty, but may be replaced at our dissolution and other discretion.

Any damages resulting from legalisation for breach of expensed or implied warranties shall be limited to the cost of the original purchase of the unit. As a condition of warranty, it is agreed that the warranty provided in this document is the sole remedy under this warranty. All liability for coincidental damages is excluded. The purchaser agrees to retain the original proof of purchase for the purpose of maintaining the effective date of this warranty. Should your BOSS AUDIO SYSTEMs product the replacement under warranty by BOSS AUDIO SYSTEMS or and authorized BOSS AUDIO SYSTEMS dealer; this replacement shall be considered a transaction under the warranty, and does not even the original warranty period. This warranty is nontransferable.

Allowancies including, but not limited to express warranty, implied warranty, warranty of merchantability. Prices for particular projects, and warranty of non-infringement of intellectual property are supremely excluded to the maximum extent allowed by law, and we neither assume or authorize any person to assume to its any liability in connection with the sale of the product. We have absolutely no liability for any and all acts of this party, including BOSO AUDIGYIS UAVS and its authorized readers and instakes.

01.2013

3451 Lunar Court • Oxnard, CA 93030 www.bossaudio.com • 800.999.1236 tech support: www.bossaudio.com/support

WARNING!

THIS POWER CAPACITOR MAY EXPLODE AND CAUSE SERIOUS INJURY OR DEATH IF ABUSED OR CONNECTED IMPROPERLY! REFER TO THIS INSTALLATION MANUAL FOR CORRECT PROCEDURES WHEN MAKING CONNECTIONS, AND CHARGING AND DISCHARGING THE CAPACITOR. NEVER EXPOSE THE CAPACITOR TO VOLTAGES HIGHER THAN SPECIFIED!

Unpacking your BOSS Capacitor System

Unpack the capacitor and all other items carefully and check to make sure nothing is missing. If any item from the list below is missing, please contact your dealer immediately.

The BOSS Capacitor System includes:

Power Capacitor

Mounting Brackets Bright Silvers Plated Head Spros Terminal

Installation Tools, including resistor for charging/discharging

Operating Features

This power capacity is an energy storage device. It is designed to supplement you car's charging system, when your audio amplifier places a high current demand upon it. This occurs, for example, when the music you are playing contains a loud, transient, deep bass signa.

The overall bass response of your system will be enhanced by using this device. Since automotive batteries are not designed to deliver the current required by modern car audio systems, a capacitor such as this ore, which is capable of discharging extremely rapidly on demand, is a logical addition to your audio system.

In addition, this capacitor can filter out the AC voltage induced in the amplifier's power supply. Unchecked, this voltage can cause DC noise in the sound system. It is recommended to use a capacitor with a minimum of one microfarad (1F) for each 1000 watts of amplifier power. (you can never have too much capacitance for any audio system).

The BOSS capacitor features a digital voltage display.

2

Installation

1. Install the capacitor as close as possible to your amplifier. The ideal location is one which allows for short wiring runs, but keeps the capacitors somewhat isolated from any stray heat generated by the amplifier.

2. While the capacitor can be mounted in any position, using the brackets provided, care should be taken to ensure that the venting plug on top of the capacitor is unobstructed. This plug is a pressure relief plug for the capacitor's fluid dielectric material should the current polarity be reversed. If this was occur, fluid will exit from the vent plug (at this point, the capacitor will require replacement).

Wiring Guidelines

1. Keep the positive power wire as short as possible, and connect it directly to the amplifier's battery supply cable. It is highly recommended to use a high performance distribution block to create a splice in the battery supply cable. Do not install a fuse between the capacitor and the amplifier, but make sure there is an appropriate fuse in the main supply cable.

2. The ground cable for the capacitor should also be as short as possible, and connected directly to a good, clean bare metal chassis ground point. DO NOT ground the capacitor directly to the amplifier ground terminal or ground cable.

3. For the above connections, use cable of the same or heavier gauge than those which the amplifier uses. High performance 4GA or 8GA OFC (oxygen free copper) cables are a good choice for this application. 10GA wire is suitable for the remote turn-on connection.

graph TD
    A["AMPLIFIER"] --> B["CHASSIC GROUND"]
    B --> C["AMPTEN POWER TERMINALS"]
    C --> D["GAPADITOR"]
    D --> E["DISTRIBUTION BLOCK"]
    E --> F["SMOTO CHAMP"]
    F --> G["HEAD UNT"]
    G --> H["FUSE"]
    H --> I["CAR BATTERY"]
    I --> J["CHASSIC POWER POINT"]
    J --> K["Ground"]

SUGGESTED WIRING

5