Valore

TW01 - Loudspeaker Valore - Free user manual and instructions

Find the device manual for free TW01 Valore in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Valore TW01 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Outdoor Wireless Speaker
Model TW01
Brand Valore
Dimensions (L x W x H) 183 x 78 x 50 mm
Weight 425 g
Material ABS + TPE
Battery Type Rechargeable lithium-ion (3.7V/2000mAh)
Charging Time Approx. 2.5 hours (first charge: 8 hours)
Playback Time Up to 9 hours
Standby Time Up to 50 hours
Wireless Range Up to 10 m
Power Input DC 5V/0.5A
Water Resistance IPX5
Bluetooth Version Not specified
Controls On/Off, Volume +/-, Multi-function button (M), LED indicator
Included Accessories Wrist strap, Micro USB charging cable (600 mm), 3.5mm Aux cable (600 mm), Bicycle bracket
Mounting Bicycle handlebar or railing via included bracket
Warranty Register at www.valore.sg
Compliance IDA standards (DA 103331)

Frequently Asked Questions - TW01 Valore

How do I charge the Valore TW01 speaker for the first time?
Charge the speaker for at least 8 hours before first use using the provided Micro USB cable. Ensure the speaker is switched off during charging.
How do I pair the speaker with my phone?
Turn on the speaker by pressing and holding the On/Off button until the blue LED blinks. On your phone, enable Bluetooth and select 'Valore TW01'. Enter '0000' if a password is required. The LED will turn solid blue when connected.
What is the battery life of the speaker?
The speaker offers up to 9 hours of playback time and up to 50 hours of standby time on a full charge.
How long does it take to fully charge the speaker?
Charging takes approximately 2.5 hours using the included Micro USB cable and a 5V/0.5A power source.
Can I use the speaker while charging?
It is recommended to switch off the speaker during charging to ensure safe and efficient charging.
What does the LED indicator mean?
Red blinking: low battery. Red solid: charging. Green solid: charging complete. Blue blinking: pairing mode. Blue solid: connected.
Is the speaker water resistant?
Yes, it has an IPX5 rating, meaning it can withstand water splashes but should not be submerged.
How do I answer or end a call?
Press the Multi-functional button (M) once to answer or end a call. Press and hold the same button to reject a call.
What should I do if the speaker won't connect?
Ensure the speaker is fully charged and within 1 meter of your device. Disconnect from any other paired devices and try pairing again. If the issue persists, turn off both devices and restart.
Does the speaker come with a warranty?
Yes, register your product at www.valore.sg for warranty support. For technical issues, email v.info@valore.sg.

User questions about TW01 Valore

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual TW01 - Valore and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TW01 by Valore.

USER MANUAL TW01 Valore

Thank you for purchasing the Valore Outdoor Wireless Speaker (TW01).

Enjoy thrilling adventures accompanied by full stereo music with Valore IPX5 water-resistant outdoor wireless speaker. Comes along with a bracket for simple mounting on bike handlebars or railings, making this a perfect companion for the outdoor enthusiast in you.

Important: Please read the user manual thoroughly before using your wireless speaker.

Specifications:

  • Wireless range: Up to 10m
  • Battery type: 3.7V/2000mAh (rechargeable lithium-ion battery)
  • Standby time: Up to 50 hours
  • Playback time: Up to 9 hours
    • Power input: DC5V/0.5A
    • Dimension (L x W x H): 183 x 78 x 50mm
    • Material: ABS + TPE
  • Weight: 425g

Package Contents:

• Outdoor wireless speaker with wrist strap
- Micro USB charging cable (600mm)
• 3.5mm Auxiliary cable (600mm)
- Bicycle bracket

UNDERSTANDING THE PRODUCT
① On/Off but ② Volume - ③ Multi-funct ④ Volume - ⑤ Auxiliary p

① On/Off button
② Volume ‘-’
③ Multi-functional button (M)
④ Volume ‘+’
⑤ Auxiliary port
⑥ Micro USB port
⑦ LED indicator

START USING THE WIRELESS SPEAKER

1) Charging the wireless speaker

Connect the USB charging cable to the speaker located on the right side of the speaker.

Note: Please charge the speaker for at least 8 hours before first use. Please make sure that the speaker is switched off when charging is in progress.

COLORSTATUSINDICATE
RedBlinkingLow battery
RedSolidCharging
GreenSolidCharging complete
BlueBlinkingPairing
BlueSolidConnected successfully

2) Pairing the wireless speaker (switched off)

Step 1: Activate Bluetooth function on your mobile device to begin pairing with speaker.

Step 2: Press and hold onto the On/Off button located on the top of the speaker to turn on, blue LED light will be blinking. The speaker now have entered pairing mode.

Step 3: Connect to the speaker by selecting 'Valore TW01' under the device list. Enter '0000' for password if required.

Step 4: Once connected, the LED light at the Bluetooth button will be solid blue.

Note: If the pairing is not successful, please turn off wireless speaker first, and then re-pair again. After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when using the next time.

If you want to pair the wireless speaker with other devices, please turn off Bluetooth function of existing source device, and pair the wireless speaker with the new device according to steps 1-4 mentioned above.

3) Wireless speaker controls

Answer a callShort press ‘M’ to answer. Short press to hang up.
End or refuse a callLong press ‘M’ to refuse the call
Power On/OffLong press On/Off button
Volume - or +Short press +/- to adjust
Next/PreviousLong press +/- to adjust
Disconnect current BluetoothLong press ‘+’ and ‘-’ to disconnect the current Bluetooth connection and search for another new device.

TROUBLESHOOTING

Issue 1: speaker is unable to connect successfully to your mobile device

Problem 1: speaker's battery is flat

Solution: Fully charge the speaker (2.5 hours) and retry connection with your mobile device.

Problem 2: speaker not paired to your mobile device

Solution: Make sure that the speaker is successfully paired upon selecting ‘Valore TW01’ in the device list.

Problem 3: speaker and mobile device too far apart

Solution: Make sure that the speaker is within a metre range during pairing and connection.

Problem 4: speaker is connected to other mobile device

Solution: Make sure that the speaker has already been disconnected before making a new connection with a new device.

Issue 2: Sound from the speaker is too soft or silent

Problem 1: speaker's battery is low / flat

Solution: Fully charge the speaker (2.5 hours) and retry connection with your mobile device.

Problem 2: speaker or mobile device's volume is too low

Solution: Turn the volume of the speaker or mobile device up to increase the volume.

Problem 3: Music track may not be audible

Solution: Make sure that the music track is of a playable format for the mobile device.

Problem 4: speaker and mobile device might not be connected properly.

Solution: Repeat the connection step via Bluetooth/auxiliary cable again to make sure that it is connected properly and try again.

TECHNICAL SUPPORT & WARRANTY

  • For Technical Support, email us at v.info@valore.sg.
  • For Warranty Registration, visit www.valore.sg.

Cautions:

Read all the instructions and warnings carefully prior to using this product.

  • Do not store the speaker in a high temperature environment.
  • Do not place the speaker near a fire or other excessively hot environments.
  • Do not expose this speaker to moisture or submerge it in liquid. Keep speaker dry at all times.
  • Do not attempt to charge the speaker using any other method or connection other than the speaker's provided charging cable.
  • Do not disassemble this speaker or attempt to repair or modify it in any manner.
  • Be cautious of excessive drops, bumps, abrasions or other impacts to this speaker. If there is any damage to the speaker such as dents, punctures, tears, deformities or corrosion, stop using the speaker and contact us immediately via email at v.info@valore.sg, or return this product to the store where you have purchased it from.
  • If the product produces an abnormal smell, high temperature (low temperature during normal use), discolours or changes shape abnormally, stop using the product and contact us immediately via email at v.info@valore.sg.

DISCLAIMER & TRADEMARKS

All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and communications statutes.

The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered trademarks and service marks of Valore and others. All other registered and unregistered company names, product names and marks mentioned herein the (“Materials”) are the property of their respective owners and may be trademarks or registered trademarks.

Complies with

IDA standards

DA 103331

Valore TW01 - DISCLAIMER & TRADEMARKS - 1

Valore TW01 - DISCLAIMER & TRADEMARKS - 2

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Valore

Model : TW01

Category : Loudspeaker