TCC-80I-DB9 - Uncategorized Moxa - Free user manual and instructions
Find the device manual for free TCC-80I-DB9 Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Serial-to-Fiber Media Converter |
| Model | TCC-80I-DB9 |
| Brand | Moxa |
| Connector Type | DB9 (RS-232/422/485) and ST/SC fiber optic |
| Fiber Type | Multi-mode, 850 nm or 1310 nm |
| Transmission Distance | Up to 2 km (multi-mode) or 15 km (single-mode, optional) |
| Data Rate | Up to 230.4 kbps |
| Power Input | 12-48 VDC or 12-24 VAC (depending on version) |
| Power Consumption | Approximately 3-5 W |
| Dimensions (W x D x H) | 67 x 100 x 22 mm (approx.) |
| Weight | Approximately 200 g |
| Operating Temperature | 0 to 60°C (standard) or -40 to 75°C (extended) |
| Humidity | 5 to 95% non-condensing |
| Surge Protection | Built-in for serial port (15 kV ESD) |
| Mounting | DIN-rail or panel mount |
| LED Indicators | Power, TX, RX, FDX/HDX, Fiber Link |
| Regulatory Approvals | CE, FCC, UL (optional) |
| Maintenance | Clean fiber connectors with lint-free wipes; no internal user-serviceable parts |
| Safety Precautions | Use only approved power supply; avoid looking into fiber ports |
| Spare Parts / Repairability | Unit not field repairable; replace entire device if faulty |
Frequently Asked Questions - TCC-80I-DB9 Moxa
What is the Moxa TCC-80I-DB9 used for?
It is a serial-to-fiber media converter that extends RS-232, RS-422, or RS-485 communication over fiber optic cable, providing electrical isolation and long-distance transmission.
What are the power requirements for the TCC-80I-DB9?
The device typically accepts 12-48 VDC or 12-24 VAC. Check the label on your unit for exact voltage and polarity.
How do I connect the fiber optic cable?
Insert the fiber connectors (ST or SC type) into the corresponding ports on the unit. Ensure connectors are clean and properly seated. The TX port of one unit goes to RX of the other.
What is the maximum distance supported?
With multi-mode fiber, distances up to 2 km are supported. Single-mode versions can reach up to 15 km or more, depending on the model.
Can I use the TCC-80I-DB9 with both RS-232 and RS-485?
Yes, the DB9 connector supports RS-232, RS-422, and RS-485 via DIP switch settings. Refer to the manual to configure the correct mode.
How do I mount the TCC-80I-DB9?
It can be mounted on a DIN-rail using the integrated clip or on a panel using screws through the mounting tabs.
What do the LED indicators mean?
PWR shows power, TX blinks during data transmission, RX during reception, FDX/HDX indicates full/half duplex, and Fiber Link is solid when fiber connection is established.
Does the TCC-80I-DB9 support surge protection?
Yes, the serial port includes 15 kV ESD protection. For external power surges, use a surge protector on the power line.
Can I use single-mode fiber with this device?
The standard model is for multi-mode fiber. For single-mode, you need a specific variant (e.g., TCC-80I-SC-SM). Check your model's label.
Where can I find the user manual?
The manual is available for free download on notice-facile.com or Moxa's official website. It includes detailed installation and configuration instructions.
User questions about TCC-80I-DB9 Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TCC-80I-DB9 - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TCC-80I-DB9 by Moxa.