DDC68 - Robinet à bière Perlick - Free user manual and instructions
Find the device manual for free DDC68 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Faucet |
| Brand | Perlick |
| Model | DDC68 |
| Material | Chrome-plated brass |
| Connection Size | 3/8" barb (standard) |
| Flow Rate | Approx. 2 oz/sec at 12 PSI |
| Dimensions (Length) | 6.5 inches |
| Dimensions (Spout Diameter) | 1.5 inches |
| Weight | 0.5 lbs |
| Finish | Polished chrome |
| Operating Pressure | 10-15 PSI |
| Cleaning Method | Disassemble and soak in warm soapy water; use a faucet brush |
| Maintenance | Regular lubrication of O-rings with food-grade grease |
| Compatibility | Standard 1" beer shank |
| Warranty | 1 year limited warranty |
| Certifications | NSF/ANSI 61 and 372 |
Frequently Asked Questions - DDC68 Perlick
How do I clean the Perlick DDC68 beer faucet?
Disassemble the faucet by unscrewing the spout and removing the internal components. Soak all parts in warm soapy water, scrub with a soft brush, rinse thoroughly, and let air dry. Reassemble and lubricate O-rings with food-grade silicone grease.
What is the recommended operating pressure?
The recommended pressure range is 10-15 PSI. Adjust using a CO2 regulator to achieve a proper pour with about 1 inch of foam.
Does the DDC68 fit standard beer shanks?
Yes, it is designed for standard 1-inch beer shanks with 3/8-inch barbed tailpieces. Ensure the shank is compatible with your draft system.
How do I adjust the flow rate?
The flow rate is primarily controlled by the CO2 pressure and the beer line length. The faucet itself has a fixed orifice; for finer control, consider adding a flow control faucet or adjusting line length.
Can I use the DDC68 for homebrewing?
Absolutely. The Perlick DDC68 is a popular choice for homebrewers due to its reliable performance and easy cleaning. It fits standard kegerator setups.
What should I do if the faucet is leaking?
Check if the faucet is fully closed. If leaking persists, disassemble and inspect the O-rings for damage or debris. Replace worn O-rings and apply food-grade lubricant.
Is the Perlick DDC68 made of lead-free materials?
Yes, it is manufactured with lead-free brass and meets NSF/ANSI 61 and 372 standards for drinking water safety.
How often should I disassemble and clean the faucet?
It is recommended to clean the faucet every 2-4 weeks, or whenever you change the beer keg. Regular cleaning prevents buildup and off-flavors.
What tools do I need for installation?
A wrench to tighten the faucet onto the shank and a small flathead screwdriver for any set screws. No special tools are required.
Does the DDC68 come with a warranty?
Yes, Perlick offers a 1-year limited warranty against defects in materials and workmanship. Keep your purchase receipt for warranty claims.
User questions about DDC68 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Robinet à bière in PDF format for free! Find your manual DDC68 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DDC68 by Perlick.